LugerForum Discussion Forums my profile | register | faq | search
upload photo | donate | calendar

Go Back   LugerForum Discussion Forums > Luger Discussion Forums > Lugerforum Archive

 
 
Thread Tools Display Modes
Old 02-23-2002, 04:39 PM   #1
JAMES
User
 
Join Date: Mar 2004
Location: Lynn, Mass.
Posts: 42
Thanks: 0
Thanked 0 Times in 0 Posts
Default valuation question

I own a luger dated 1913 at the front of the receiver further noted "ERFURT" with a crown above it and a #26 adjacent. Looking at the pistol from the safety side, I find GESICHERT at or beneath the safety. The serial # is 4426, and all the parts seem to be consistantly numbered "26". The finish is chrome and the barrel length is 81mm. On the opposite side I am finding 3 small markings which all have crowns. From left to right the 1st has a crown with what looks like an old english B, a crown over a script looking D, and a crown over a C.


The holster is a blackish brown in good general condition with a good buckle and strap, a pull tab, an interior compartment for a cleaner and an exterior pouch containing an additional magazine.


I have never shot it, and I have no idea of its caliber.


My interest is valuation and rareity of what I am guessing is WW1 vintage. It was surrendered to my friend after the war in Bavaria by a very old man who may have been a policeman during the war.



JAMES is offline  
Old 02-23-2002, 04:55 PM   #2
tom
User
 
Join Date: Jun 2002
Posts: 269
Thanks: 0
Thanked 4 Times in 2 Posts
Default Re: valuation question

You have a chromed W.W.I pistol which has been, by the addition of the chrome finish, ruined from a collector standpoint. However, it may well be a good shooter. Value of these chromed monsters ranges from about 350-600 depending on who is buying and where. Oh, its caliber is 9MM.


Hope this helps,

Tom



tom is offline  
Old 02-23-2002, 05:26 PM   #3
JAMES
User
 
Join Date: Mar 2004
Location: Lynn, Mass.
Posts: 42
Thanks: 0
Thanked 0 Times in 0 Posts
Default Re: valuation question

Is there any additional collector value to the holster rig either with or without the pistol?



JAMES is offline  
Old 02-23-2002, 07:17 PM   #4
Johnny Peppers
User
 
Join Date: Jun 2002
Location: Calion, Arkansas
Posts: 1,042
Thanks: 0
Thanked 1 Time in 1 Post
Default Re: valuation question

James,

Just my opinion, but I would think that the holster would have more value on it's own. Anyone that would be interested in buying your chromed or nickled Luger would want the holster thrown in on the deal, and more than likely would not want to pay what the holster and spare magazine are worth. Does the small pocket inside the holster still have the loading tool?



Johnny Peppers is offline  
Old 02-23-2002, 08:26 PM   #5
lugerholsterrepair
Moderator
Lifetime Forum
Patron
 
lugerholsterrepair's Avatar
 
Join Date: Jun 2002
Location: Arizona/Colorado
Posts: 7,775
Thanks: 4,995
Thanked 3,134 Times in 1,439 Posts
Default Re: valuation question

James, Just a thought but you can have the chrome removed electronically and the pistol restored back to it's original rust blue. I did it on one of my pistols and it came out great. You want to have it done by someone who knows what he is doing so as not to buff it after the chrome is off. Ted Green on the Forum here would be my choice. There is some disagreement as to what this does to value but I do not think that it will hurt it, only improve it in anyones eyes. Do you intend to keep the pistol or get what you can out of it? The holster in good shape is worth between $100.00 and $300.00 in pristine shape. WW1 wood bottom mags usually go for $100.00 and up. Alot depending on condition. Jerry Burney



lugerholsterrepair is offline  
Old 02-24-2002, 12:00 PM   #6
JAMES
User
 
Join Date: Mar 2004
Location: Lynn, Mass.
Posts: 42
Thanks: 0
Thanked 0 Times in 0 Posts
Default Re: valuation question

Most likely I would sell it "as is" and let someone else remove the chrome electronically. I would also like to sell the holster to the same party. Regarding the holster, upon closer inspection, there is broken stitching that would need tending to. The (2) ammo clips as far as I can tell seem to have steel bottoms. The one in the holster slot also has rust on it. Would you care to make an offer?



JAMES is offline  
Old 02-24-2002, 12:51 PM   #7
redace97
Guest
 
Posts: n/a
Default Re: valuation question

James,

I would be interested in your chromed luger. You can e-mail me at redace97@yahoo.com



 
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 11:12 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
Copyright © 1998 - 2026, Lugerforum.com