my profile |
register |
faq |
search upload photo | donate | calendar |
|
03-25-2013, 01:12 PM | #1 |
User
Join Date: Sep 2008
Location: New Orleans
Posts: 29
Thanks: 6
Thanked 19 Times in 4 Posts
|
Help with two commercial Lugers please
Hello all,
I have two commercial lugers that I'm trying to get an idea of what they are, age and approximate worth. I own several thanks to my father, but unfortunaly dont know much about them other than what I've been reading here and a couple books I have. Lots of photos, but if there is anything else you need, please ask. I'm looking to add an M1 Garand to my collection and these may go to fund that. Thanks in advance! Both Lugers are .30 caliber First Luger: Serial number 5705, Crown over N, Made in Germany on left side of barrel. All numbers match. Bore is in good condition. No pitting. Finish is good, but has some wear. Has original mag, but doesnt belong to gun. Has a small dink on the top of the barrel. Second Luger: Serial number 382, Crown over N, all numbers match, bore is good. Finish is great, but I'm not sure if its been reblued. After looking closer, I dont think it was reblued. Shoulder stock lug looks like it was ground off? Or did they come without? Has a mag, but looks to be a repro. Has the word Germany on the right side of frame. Also has a small threaded hole in the front of the trigger guard. Like someone was trying to put in a trigger travel adjustment? Last edited by kk5fe; 03-25-2013 at 09:35 PM. |
03-25-2013, 02:16 PM | #2 |
Patron
LugerForum Patron Join Date: Nov 2008
Posts: 4,047
Thanks: 578
Thanked 1,414 Times in 887 Posts
|
Both appear to be commercial Lugers, and while the book guys can be more specific, a safe guess for the manufacture date is in the 1920's.
I don't see either as highly collectable or valuable, but I'd guess around $850 on the top, and $650 on the second one. There are a lot of variables to be resolved. Ground off lug or never there? Which one is 9mm and which .30? Etc. But those are my WAG's. M1 Garands are a lot of fun to shoot, but then again so are Lugers. You may wish to shoot them a bit before parting with them. Remember that once Dad's Lugers are gone, they are never coming back. There are always Garands out there. Thanks for sharing. dju |
The following 2 members says Thank You to DavidJayUden for your post: |
03-25-2013, 02:27 PM | #3 |
User
Join Date: Sep 2008
Location: New Orleans
Posts: 29
Thanks: 6
Thanked 19 Times in 4 Posts
|
Thanks for the reply! I totally understand about the fun of Lugers. Like I mentioned, I have several.... maybe a few more than several. Anyway, I have a few that will never be sold and I have a few that could be turned into another form of the hobby. I'll edit the post tonight with which one is which caliber.
|
03-25-2013, 02:34 PM | #4 |
Super Moderator - Patron
LugerForum Life Patron Join Date: Dec 2009
Location: Eastern North Carolina, USA
Posts: 3,900
Thanks: 1,372
Thanked 3,094 Times in 1,503 Posts
|
Hi,
The hole in the 682m was done after it left the factory, and I think it detracts from it. It might be possible to fix that using a TIG welder, and some work to re-contour the area and refinish it, but it would cost more than the work is worth. Both were early (1923-1924) commercial Lugers exported to the USA. Double check to ensure that one is in 9mm. That would be unusual. Marc
__________________
Igitur si vis pacem, para bellum - - Therefore if you want peace, prepare for war. |
The following member says Thank You to mrerick for your post: |
03-25-2013, 09:33 PM | #5 | |
User
Join Date: Sep 2008
Location: New Orleans
Posts: 29
Thanks: 6
Thanked 19 Times in 4 Posts
|
Quote:
Also after looking closer, I dont think 382 was reblued. A few more photos: |
|
The following member says Thank You to kk5fe for your post: |
03-26-2013, 03:40 AM | #6 |
User
Join Date: Mar 2008
Location: Marco Island, Florida
Posts: 4,867
Thanks: 1,685
Thanked 1,916 Times in 1,192 Posts
|
Unusual "Made in Germany" stamp on the barrel of the first pistol.
|
|
|