P08 Cleaning Rod

josef · 09-07-2006, 11:53 PM

This came along with a byf rig , and I know it is for an earlier P08. Can anyone tell me if this is original or not, and what a fair [pice would be for this? No visible marks as far as I can tell. Thanks Gentlemen,
Joe

John Sabato · 09-08-2006, 09:15 PM

looks original to me Joe, but let's hear some consensus from others before we call it a fact...

LU1900 · 09-09-2006, 04:13 AM

...........

Lugerdoc · 09-09-2006, 08:51 AM

Joe, It difficult to verify originality with actually examining the rod, but it is the small loop type that was used with the Portugese BYF/42 PO8s in their M43 holsters. The earlier Weimar era Police ones were the large loop type and usually unblued. TH

josef · 09-09-2006, 12:17 PM

Thanks veyr much Gentlemen, I will pullt his from the safe and take a very clsoe look at it, as well as better pics and post them. I have never owned a Portugese P08, so not sure why this was included with my byf41 rig. Thanks again Gentlemen,
Joe

josef · 09-09-2006, 06:42 PM

Here are some better detailed pics of the cleaning rod, hope these can help identify it, thanks very much Gentlemen,
Joe

Lugerdoc · 09-10-2006, 09:57 AM

Joe, I would say that your rod is original, since the none theaded end is slight rounded and the repros where generally cut off square. Also most of the n & m range 42 BYFs from Portugal were originally exported to Canada, these a good chance of finding the accessories up there. Tom

Steinar · 09-10-2006, 10:05 AM

Since we now have such fine photos from josef,
perhaps someone have pictures of a fake rod(s) to compare with?

josef · 09-10-2006, 10:25 AM

Thank you very much Gentlemen. I was hoping it would be for a German P08, rather than a Portugese. I have never seen a Portugese P08 before, their holsters must have had a slot for the rods? Thanks again for your expertise Gentlemen, it's a great forum!
Joe

kidvett · 09-10-2006, 10:14 PM

Joe,

I have 2 M943 ``m`` block Portugese Rigs ( one of each produced: blued & parkerized ) The rod is very similar to the ones issued with those and with the above comments made, I believe it's probably a Portugese one...

I probably have pics somewhere, send email for such...you have my info...

Marc

josef · 09-10-2006, 10:36 PM

Thank you very much Marc!

Joe

09-07-2006, 11:53 PM	#1
josef User Join Date: Jun 2003 Location: CANADA Posts: 194 Thanks: 4 Thanked 4 Times in 2 Posts	P08 Cleaning Rod This came along with a byf rig , and I know it is for an earlier P08. Can anyone tell me if this is original or not, and what a fair [pice would be for this? No visible marks as far as I can tell. Thanks Gentlemen, Joe

09-08-2006, 09:15 PM	#2
John Sabato Lifer Lifetime Forum Patron Join Date: Jun 2002 Location: The Capital of the Free World Posts: 10,156 Thanks: 3,003 Thanked 2,309 Times in 1,098 Posts	looks original to me Joe, but let's hear some consensus from others before we call it a fact... __________________ regards, -John S "...We hold these truths to be self-evident that ALL men are created EQUAL *and are endowed by their Creator* with certain UNALIENABLE* rights, and among these are life, LIBERTY, and the pursuit of happiness..."*

09-09-2006, 04:13 AM	#3
LU1900 User Join Date: Jul 2003 Location: FRANCE Posts: 914 Thanks: 49 Thanked 475 Times in 200 Posts	........... __________________ Best regards from France...Patrice https://www.fichier-pdf.fr/2016/03/1...nd-snail-drum/

09-09-2006, 08:51 AM	#4
Lugerdoc Patron LugerForum Patron Join Date: Jun 2002 Location: POB 398 St.Charles,MO. 63302 Posts: 5,089 Thanks: 6 Thanked 737 Times in 484 Posts	Joe, It difficult to verify originality with actually examining the rod, but it is the small loop type that was used with the Portugese BYF/42 PO8s in their M43 holsters. The earlier Weimar era Police ones were the large loop type and usually unblued. TH __________________ Tom Heller POB 398 ST.Charles, MO. 63302 Tel 636-447-3006 lugerdoc@charter.net

09-10-2006, 09:57 AM	#7
Lugerdoc Patron LugerForum Patron Join Date: Jun 2002 Location: POB 398 St.Charles,MO. 63302 Posts: 5,089 Thanks: 6 Thanked 737 Times in 484 Posts	Joe, I would say that your rod is original, since the none theaded end is slight rounded and the repros where generally cut off square. Also most of the n & m range 42 BYFs from Portugal were originally exported to Canada, these a good chance of finding the accessories up there. Tom __________________ Tom Heller POB 398 ST.Charles, MO. 63302 Tel 636-447-3006 lugerdoc@charter.net

09-09-2006, 12:17 PM	#5
josef User Join Date: Jun 2003 Location: CANADA Posts: 194 Thanks: 4 Thanked 4 Times in 2 Posts	Thanks veyr much Gentlemen, I will pullt his from the safe and take a very clsoe look at it, as well as better pics and post them. I have never owned a Portugese P08, so not sure why this was included with my byf41 rig. Thanks again Gentlemen, Joe

09-09-2006, 06:42 PM	#6
josef User Join Date: Jun 2003 Location: CANADA Posts: 194 Thanks: 4 Thanked 4 Times in 2 Posts	Here are some better detailed pics of the cleaning rod, hope these can help identify it, thanks very much Gentlemen, Joe

09-10-2006, 10:05 AM	#8
Steinar User Join Date: May 2004 Posts: 1,538 Thanks: 18 Thanked 36 Times in 21 Posts	Since we now have such fine photos from josef, perhaps someone have pictures of a fake rod(s) to compare with? __________________ Previously known as Morgan Kane

09-10-2006, 10:25 AM	#9
josef User Join Date: Jun 2003 Location: CANADA Posts: 194 Thanks: 4 Thanked 4 Times in 2 Posts	Thank you very much Gentlemen. I was hoping it would be for a German P08, rather than a Portugese. I have never seen a Portugese P08 before, their holsters must have had a slot for the rods? Thanks again for your expertise Gentlemen, it's a great forum! Joe

09-10-2006, 10:14 PM	#10
kidvett User Join Date: Jun 2002 Location: Montreal, Quebec Posts: 584 Thanks: 0 Thanked 3 Times in 3 Posts	Joe, I have 2 M943 ``m`` block Portugese Rigs ( one of each produced: blued & parkerized ) The rod is very similar to the ones issued with those and with the above comments made, I believe it's probably a Portugese one... I probably have pics somewhere, send email for such...you have my info... Marc

09-10-2006, 10:36 PM	#11
josef User Join Date: Jun 2003 Location: CANADA Posts: 194 Thanks: 4 Thanked 4 Times in 2 Posts	Thank you very much Marc! Joe