LugerForum Discussion Forums

LugerForum Discussion Forums (https://forum.lugerforum.com/index.php)
-   Luger Accessories (https://forum.lugerforum.com/forumdisplay.php?f=126)
-   -   P08 Cleaning Rod (https://forum.lugerforum.com/showthread.php?t=15278)

josef 09-07-2006 10:53 PM

P08 Cleaning Rod
 
This came along with a byf rig , and I know it is for an earlier P08. Can anyone tell me if this is original or not, and what a fair [pice would be for this? No visible marks as far as I can tell. Thanks Gentlemen,
Joe
http://members.shaw.ca/jnkubat/lugeraccrod.jpg

John Sabato 09-08-2006 08:15 PM

looks original to me Joe, but let's hear some consensus from others before we call it a fact...

LU1900 09-09-2006 03:13 AM

...........

Lugerdoc 09-09-2006 07:51 AM

Joe, It difficult to verify originality with actually examining the rod, but it is the small loop type that was used with the Portugese BYF/42 PO8s in their M43 holsters. The earlier Weimar era Police ones were the large loop type and usually unblued. TH

josef 09-09-2006 11:17 AM

Thanks veyr much Gentlemen, I will pullt his from the safe and take a very clsoe look at it, as well as better pics and post them. I have never owned a Portugese P08, so not sure why this was included with my byf41 rig. Thanks again Gentlemen,
Joe

josef 09-09-2006 05:42 PM

Here are some better detailed pics of the cleaning rod, hope these can help identify it, thanks very much Gentlemen,
Joe:)
http://members.shaw.ca/jnkubat/clrodp08%20001.jpg
http://members.shaw.ca/jnkubat/clrodp08%20002.jpg
http://members.shaw.ca/jnkubat/clrodp08%20003.jpg
http://members.shaw.ca/jnkubat/clrodp08%20004.jpg
http://members.shaw.ca/jnkubat/clrodp08%20005.jpg
http://members.shaw.ca/jnkubat/clrodp08%20006.jpg

Lugerdoc 09-10-2006 08:57 AM

Joe, I would say that your rod is original, since the none theaded end is slight rounded and the repros where generally cut off square. Also most of the n & m range 42 BYFs from Portugal were originally exported to Canada, these a good chance of finding the accessories up there. Tom

Steinar 09-10-2006 09:05 AM

Since we now have such fine photos from josef,
perhaps someone have pictures of a fake rod(s) to compare with?

josef 09-10-2006 09:25 AM

Thank you very much Gentlemen. I was hoping it would be for a German P08, rather than a Portugese. I have never seen a Portugese P08 before, their holsters must have had a slot for the rods? Thanks again for your expertise Gentlemen, it's a great forum!
Joe

kidvett 09-10-2006 09:14 PM

Joe,

I have 2 M943 ``m`` block Portugese Rigs ( one of each produced: blued & parkerized ) The rod is very similar to the ones issued with those and with the above comments made, I believe it's probably a Portugese one...

I probably have pics somewhere, send email for such...you have my info...

Marc

josef 09-10-2006 09:36 PM

Thank you very much Marc!:)
Joe


All times are GMT -4. The time now is 03:23 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright © 1998 - 2025, Lugerforum.com