1927 commercial barrel change

matt ott · 12-07-2010, 11:03 AM

i recently bought a1927 commercial 30 cal gun but the barrel is pitted and frosty is it possible to install a 9mm barrel. would this change require different springs ect. tx. for any info,, Matt

DavidJayUden · 12-07-2010, 11:16 AM

I believe that the .30 spring is different (shorter) than the 9mm mainspring. No other changes that I am aware of. LugerDoc is a great assistance if needed.
dju

Lugerdoc · 12-07-2010, 11:17 AM

Matt, I can install your choice of 4" to 16" PO8 barrels from $50 to 150 in your commerical luger for $100 labor + $25 return S&H. You should also change the recoil spring, which I can do at the same time for around $50, depending on the length of barrel chosen. TH

sheepherder · 01-23-2011, 08:58 AM

Quote:

Originally Posted by spitfire1944

...and 100 bucks to change out a barrel. My friend, it twists on the receiver. That is all. DO you want to pay someone 1000 dollars an hour, for it takes 3 minutes to do the job, so.do the math.

You are funny!!!

Edward Tinker · 01-23-2011, 10:11 AM

Quote:

Originally Posted by spitfire1944

... My friend, it twists on the receiver. ....

That is true and many folks have screwed up barrels and receivers.

...ACT NICER PLEASE, as this is a friendly forum and many things can be stated nicely.

ADMIN

Lugerdoc · 01-23-2011, 11:17 AM

Spitfire, I can tell that you haven't changed many luger barrels. With the set up time, insuring that the front sight lines up in the proper vertical position, installing a front sight and possible chamber ream and ramp polishing, I want to see you do it in less than an hour under optimal conditions, and much longer if all doesn't go well at first attempt. TH

Lugerdoc · 01-23-2011, 11:19 AM

PS: Almost forgot the test firing and correcting any feeding/extraction problems. Lugerdoc

BogeyB · 01-23-2011, 08:12 PM

Go get 'em Tom!

Mike

Edward Tinker · 01-23-2011, 09:46 PM

Quote:

Originally Posted by BOGEYB

Go get 'em Tom!

Mike

NO, LETS CLOSE THIS THREAD NOW

12-07-2010, 11:03 AM	#1
matt ott Banned Join Date: Oct 2010 Posts: 33 Thanks: 3 Thanked 2 Times in 2 Posts	1927 commercial barrel change i recently bought a1927 commercial 30 cal gun but the barrel is pitted and frosty is it possible to install a 9mm barrel. would this change require different springs ect. tx. for any info,, Matt

12-07-2010, 11:17 AM	#3
Lugerdoc Patron LugerForum Patron Join Date: Jun 2002 Location: POB 398 St.Charles,MO. 63302 Posts: 5,089 Thanks: 6 Thanked 737 Times in 484 Posts	Matt, I can install your choice of 4" to 16" PO8 barrels from $50 to 150 in your commerical luger for $100 labor + $25 return S&H. You should also change the recoil spring, which I can do at the same time for around $50, depending on the length of barrel chosen. TH __________________ Tom Heller POB 398 ST.Charles, MO. 63302 Tel 636-447-3006 lugerdoc@charter.net

01-23-2011, 11:17 AM	#6
Lugerdoc Patron LugerForum Patron Join Date: Jun 2002 Location: POB 398 St.Charles,MO. 63302 Posts: 5,089 Thanks: 6 Thanked 737 Times in 484 Posts	Spitfire, I can tell that you haven't changed many luger barrels. With the set up time, insuring that the front sight lines up in the proper vertical position, installing a front sight and possible chamber ream and ramp polishing, I want to see you do it in less than an hour under optimal conditions, and much longer if all doesn't go well at first attempt. TH __________________ Tom Heller POB 398 ST.Charles, MO. 63302 Tel 636-447-3006 lugerdoc@charter.net

01-23-2011, 11:19 AM	#7
Lugerdoc Patron LugerForum Patron Join Date: Jun 2002 Location: POB 398 St.Charles,MO. 63302 Posts: 5,089 Thanks: 6 Thanked 737 Times in 484 Posts	PS: Almost forgot the test firing and correcting any feeding/extraction problems. Lugerdoc __________________ Tom Heller POB 398 ST.Charles, MO. 63302 Tel 636-447-3006 lugerdoc@charter.net

01-23-2011, 08:12 PM	#8
BogeyB Lifer Lifetime Forum Patron Join Date: Jul 2003 Location: Mc Donough, GA. Posts: 422 Thanks: 0 Thanked 227 Times in 99 Posts	Go get 'em Tom! Mike __________________ MAGA Always!! NRA Benifactor, GCA

12-07-2010, 11:16 AM	#2
DavidJayUden Patron LugerForum Patron Join Date: Nov 2008 Posts: 4,047 Thanks: 578 Thanked 1,414 Times in 887 Posts	I believe that the .30 spring is different (shorter) than the 9mm mainspring. No other changes that I am aware of. LugerDoc is a great assistance if needed. dju