sub caliber insert

weissbrot1 · 08-26-2009, 01:50 AM

when dad brought back a 1916 luger in 1945, there was an insert with it that appeared to fit into the barrel and lock on the front sight. this piece is composed of a 4 inch tube that fits into the barrel( 22 or 25 caliber?) there is a collar that locks onto the front sight and behind that is two knurled? bands~3/4 inches and a third band `1/2 IN FOLLOWED BY A SMOOTH BAND AND THEN A 1/2 INCH BAND. i KNOW THIS IS NOT A VERY GOOD DESCRIPTION, BUT ANY INFO WOULD BE GREATLY APPRECIATED. dAD SAID HE THOUGHT IT MAY HAVE BEEN USED FOR EXECUTIONS , BUT WAS NOT SURE. the pistol was captured iin bavaria. Thanks for your help.
Jerry

Ron Wood · 08-26-2009, 02:25 AM

The insert your dad brought back was not used for anything as sinister as executions. It is a 4mm single-shot conversion used for indoor target practice. It used an inexpensive low-powered round that would probably break the skin but wouldn't penetrate to a depth to be lethal (unless a really freaky accident happened, and I certainly would not want to be shot with one!). From your description the unit was almost certainly of the type manufactured by Rheinisch-Westfalische Sprengstoff A.G/Weiss located in Nurnberg. It was used by the Reichswehr for training.

Cristi · 08-26-2009, 04:02 AM

I think is similar with this one

weissbrot1 · 08-26-2009, 01:21 PM

my insert doesn,t loook anything like yours. i will try to attach a picture if i can figure out how to do it. thanks fot the reply.
jerry

Edward Tinker · 08-26-2009, 04:23 PM

Jerry, I bet its the type I have, will try to shoot a picture tonight. Mine is a police and I bet your's is the same type, tehy made them for police and for military.

Edward Tinker · 08-26-2009, 07:38 PM

Here is the type I have, the round tube has rifeling in it.

The end piece is Schutzpolizei Berlin.

There is a spring like action as you push it on; unsure if you shot single rounds or used one of those 4mm magazines. The lip at the rear is not beveled like a 45 acp barrel, so it makes me believe that it was placed one round at a time.

BTW, there is not a snap cap or round in the chamber, the end of the rifeled tube pushed up the extractor.

Ed

weissbrot1 · 08-31-2009, 03:37 PM

there should be 5 pictures attached to this message. sorry about the quality of these pictures. please let me know if they came through so i know i did it right this time.

weissbrot1 · 08-31-2009, 03:53 PM

Click image for larger version

Name: DSCF0115.jpg
Views: 279
Size: 149.9 KB
ID: 8095

Click image for larger version

Name: DSCF0116.jpg
Views: 279
Size: 90.6 KB
ID: 8096

Click image for larger version

Name: DSCF0117.jpg
Views: 280
Size: 79.8 KB
ID: 8097

Click image for larger version

Name: DSCF0118.jpg
Views: 276
Size: 53.3 KB
ID: 8098

Click image for larger version

Name: DSCF0119.jpg
Views: 293
Size: 39.7 KB
ID: 8099

sheepherder · 08-31-2009, 07:24 PM

Weissbrot1 - The first pic looks OK, but you lost the focus for the other four...

Ron Wood · 08-31-2009, 08:00 PM

Your photos confirm that this sub-caliber conversion unit was made by Rheinisch-Westfalische Sprengstoff A.G/Weiss. See page 319 of Eugene Bender's "Luger Holsters and Accessories of the 20th Century". In the last photo it appears that there is some writing on the end of the barrel insert...can you read it?

weissbrot1 · 08-31-2009, 09:22 PM

the writing on end of insert is 15
1700 as written. I have no idea when this unit was manufactured--it was shipped home in 1945 along with the pistol and two bayonets according to the paperwork filled out for shipment to the states.

klaus 3338 · 09-01-2009, 02:21 AM

Weissbrot, this conversion unit is the rarest I know to exist. Some better (much better) photos would be nice.
Regards Klaus

Edward Tinker · 09-01-2009, 09:24 AM

I presume mine is just a normal one then ;>)

ed

Quote:

Originally Posted by Edward Tinker

Here is the type I have, the round tube has rifeling in it.

The end piece is Schutzpolizei Berlin.

There is a spring like action as you push it on; unsure if you shot single rounds or used one of those 4mm magazines. The lip at the rear is not beveled like a 45 acp barrel, so it makes me believe that it was placed one round at a time.

BTW, there is not a snap cap or round in the chamber, the end of the rifeled tube pushed up the extractor.

Ed

klaus 3338 · 09-01-2009, 01:32 PM

Edward, it is not a normal one. I found only 5 like yours in 25 years collecting. But the RWS one is really rare. I never owned one, yes, I never had one in my hand. So, some closeup photos would be nice.

weissbrot1 · 09-01-2009, 04:36 PM

I hope some of these are better. i will try my sons camera tomorrow.

Click image for larger version

Name: DSCF0140.jpg
Views: 279
Size: 98.3 KB
ID: 8109

Click image for larger version

Name: DSCF0139.jpg
Views: 283
Size: 117.6 KB
ID: 8110

Click image for larger version

Name: DSCF0136.jpg
Views: 283
Size: 106.4 KB
ID: 8111

Click image for larger version

Name: DSCF0135.jpg
Views: 265
Size: 122.0 KB
ID: 8112

Click image for larger version

Name: DSCF0134.jpg
Views: 297
Size: 89.3 KB
ID: 8113

Click image for larger version

Name: DSCF0133.jpg
Views: 286
Size: 133.5 KB
ID: 8114

Click image for larger version

Name: DSCF0130.jpg
Views: 281
Size: 135.5 KB
ID: 8115

Click image for larger version

Name: DSCF0129.jpg
Views: 276
Size: 163.6 KB
ID: 8116

Click image for larger version

Name: DSCF0128.jpg
Views: 284
Size: 56.1 KB
ID: 8117

Click image for larger version

Name: DSCF0127.jpg
Views: 275
Size: 126.6 KB
ID: 8118

weissbrot1 · 09-01-2009, 04:42 PM

Click image for larger version

Name: DSCF0122.jpg
Views: 183
Size: 113.8 KB
ID: 8119

Click image for larger version

Name: DSCF0123.jpg
Views: 188
Size: 83.0 KB
ID: 8120

Click image for larger version

Name: DSCF0125.jpg
Views: 202
Size: 121.3 KB
ID: 8121

Click image for larger version

Name: DSCF0126.jpg
Views: 190
Size: 68.3 KB
ID: 8122

Vlim · 09-01-2009, 04:50 PM

Here's a scan from the 1936 RWS catalog.

Note the little loading spoon and the construction of the ring.

The RWS barrels were actually numbered to identify the pistol type they belonged to.

Number 15 was the 9mm version, 100mm barrel length and 160mm insert barrel length.

Other numbers were:
Number, calibre, original barrel length, insert barrel length.
14, .30 luger, 95mm, 135mm.
6, .30 luger, 120mm, 160mm.
29, .30 luger, 145mm, 185mm.
31, .30 luger, 200mm, 240mm.
15, 9x19, 100mm, 160mm.
36, 9x19, 120mm, 180mm
27, 9x19, 150mm, 200mm.
16, 202mm, 240mm.

klaus 3338 · 09-02-2009, 03:12 PM

Weissbrot, nice, nice, very nice. I wish it would be mine! I still have 12 different conversion units in 4mm and picked on one day from a local gunsmith more than 60 units in 4mm but I never saw one like yours before and I know only of two others of them here in Geramny. Really great stuff. Thanks for showing.

weissbrot1 · 09-02-2009, 08:21 PM

klaus, you are welcome. Thanks to all for their information and enlightenment on a very interesting piece of history. i just wish that information for a bayonet was as available. I think one of the bayonets i have was used in the american revolution by one of my ancestors. He was a Hessian and fought on the wrong side. after the war he remained in america. even the expert? at the quartermaster meuseum in 1964 was unable to furnish any info. thanks again to all. it is good to have somewhere to go to find such a knowledgable group. jerry

sheepherder · 11-26-2014, 09:41 PM

Bump!

Now that it's ~5 years later and I've seen [pics] of other sub caliber inserts, I can see this one is very different.

08-26-2009, 01:50 AM	#1
weissbrot1 User Join Date: Aug 2009 Posts: 8 Thanks: 0 Thanked 0 Times in 0 Posts	sub caliber insert when dad brought back a 1916 luger in 1945, there was an insert with it that appeared to fit into the barrel and lock on the front sight. this piece is composed of a 4 inch tube that fits into the barrel( 22 or 25 caliber?) there is a collar that locks onto the front sight and behind that is two knurled? bands~3/4 inches and a third band `1/2 IN FOLLOWED BY A SMOOTH BAND AND THEN A 1/2 INCH BAND. i KNOW THIS IS NOT A VERY GOOD DESCRIPTION, BUT ANY INFO WOULD BE GREATLY APPRECIATED. dAD SAID HE THOUGHT IT MAY HAVE BEEN USED FOR EXECUTIONS , BUT WAS NOT SURE. the pistol was captured iin bavaria. Thanks for your help. Jerry

08-26-2009, 02:25 AM	#2
Ron Wood Moderator 2010 LugerForum Patron Join Date: Jun 2002 Location: Santa Teresa New Mexico just outside of the West Texas town of El Paso Posts: 7,022 Thanks: 1,090 Thanked 5,177 Times in 1,702 Posts	The insert your dad brought back was not used for anything as sinister as executions. It is a 4mm single-shot conversion used for indoor target practice. It used an inexpensive low-powered round that would probably break the skin but wouldn't penetrate to a depth to be lethal (unless a really freaky accident happened, and I certainly would not want to be shot with one!). From your description the unit was almost certainly of the type manufactured by Rheinisch-Westfalische Sprengstoff A.G/Weiss located in Nurnberg. It was used by the Reichswehr for training. __________________ If it's made after 1918...it's a reproduction

08-26-2009, 04:02 AM	#3
Cristi User Join Date: Aug 2009 Posts: 23 Thanks: 0 Thanked 1 Time in 1 Post	I think is similar with this one Attached Thumbnails

08-26-2009, 04:23 PM	#5
Edward Tinker Super Moderator Eternal Lifer LugerForum Patron Join Date: Jun 2002 Location: North of Spokane, WA Posts: 15,932 Thanks: 2,032 Thanked 4,528 Times in 2,091 Posts	Jerry, I bet its the type I have, will try to shoot a picture tonight. Mine is a police and I bet your's is the same type, tehy made them for police and for military. __________________ Edward Tinker ************ Co-Author of Police Lugers - Co-Author of Simson Lugers Author of Veteran Bring Backs Vol I, Vol II, Vol III and Vol IV

08-26-2009, 07:38 PM	#6
Edward Tinker Super Moderator Eternal Lifer LugerForum Patron Join Date: Jun 2002 Location: North of Spokane, WA Posts: 15,932 Thanks: 2,032 Thanked 4,528 Times in 2,091 Posts	Here is the type I have, the round tube has rifeling in it. The end piece is Schutzpolizei Berlin. There is a spring like action as you push it on; unsure if you shot single rounds or used one of those 4mm magazines. The lip at the rear is not beveled like a 45 acp barrel, so it makes me believe that it was placed one round at a time. BTW, there is not a snap cap or round in the chamber, the end of the rifeled tube pushed up the extractor. Ed Attached Thumbnails __________________ Edward Tinker ************ Co-Author of Police Lugers - Co-Author of Simson Lugers Author of Veteran Bring Backs Vol I, Vol II, Vol III and Vol IV

08-26-2009, 01:21 PM	#4
weissbrot1 User Join Date: Aug 2009 Posts: 8 Thanks: 0 Thanked 0 Times in 0 Posts	my insert doesn,t loook anything like yours. i will try to attach a picture if i can figure out how to do it. thanks fot the reply. jerry

08-31-2009, 03:37 PM	#7
weissbrot1 User Join Date: Aug 2009 Posts: 8 Thanks: 0 Thanked 0 Times in 0 Posts	pictures of my insert (i hope) there should be 5 pictures attached to this message. sorry about the quality of these pictures. please let me know if they came through so i know i did it right this time.

08-31-2009, 03:53 PM	#8
weissbrot1 User Join Date: Aug 2009 Posts: 8 Thanks: 0 Thanked 0 Times in 0 Posts	pictures take 2

08-31-2009, 07:24 PM	#9
sheepherder Lifer Lifetime Forum Patron Join Date: Feb 2009 Location: ...on the 'ol Erie Canal... Posts: 8,182 Thanks: 1,400 Thanked 4,442 Times in 2,330 Posts	Weissbrot1 - The first pic looks OK, but you lost the focus for the other four...

08-31-2009, 08:00 PM	#10
Ron Wood Moderator 2010 LugerForum Patron Join Date: Jun 2002 Location: Santa Teresa New Mexico just outside of the West Texas town of El Paso Posts: 7,022 Thanks: 1,090 Thanked 5,177 Times in 1,702 Posts	Your photos confirm that this sub-caliber conversion unit was made by Rheinisch-Westfalische Sprengstoff A.G/Weiss. See page 319 of Eugene Bender's "Luger Holsters and Accessories of the 20th Century". In the last photo it appears that there is some writing on the end of the barrel insert...can you read it? __________________ If it's made after 1918...it's a reproduction

08-31-2009, 09:22 PM	#11
weissbrot1 User Join Date: Aug 2009 Posts: 8 Thanks: 0 Thanked 0 Times in 0 Posts	the writing on end of insert is 15 1700 as written. I have no idea when this unit was manufactured--it was shipped home in 1945 along with the pistol and two bayonets according to the paperwork filled out for shipment to the states.

09-01-2009, 02:21 AM	#12
klaus 3338 User Join Date: Jun 2009 Location: Germany Posts: 517 Thanks: 0 Thanked 411 Times in 160 Posts	Weissbrot, this conversion unit is the rarest I know to exist. Some better (much better) photos would be nice. Regards Klaus

09-01-2009, 01:32 PM	#14
klaus 3338 User Join Date: Jun 2009 Location: Germany Posts: 517 Thanks: 0 Thanked 411 Times in 160 Posts	Edward, it is not a normal one. I found only 5 like yours in 25 years collecting. But the RWS one is really rare. I never owned one, yes, I never had one in my hand. So, some closeup photos would be nice.

09-01-2009, 04:36 PM	#15
weissbrot1 User Join Date: Aug 2009 Posts: 8 Thanks: 0 Thanked 0 Times in 0 Posts	new pictures I hope some of these are better. i will try my sons camera tomorrow.

09-01-2009, 04:42 PM	#16
weissbrot1 User Join Date: Aug 2009 Posts: 8 Thanks: 0 Thanked 0 Times in 0 Posts	4 more pictures

09-01-2009, 04:50 PM	#17
Vlim Moderator Lifetime LugerForum Patron Join Date: Oct 2002 Location: Europe Posts: 5,053 Thanks: 1,036 Thanked 3,988 Times in 1,205 Posts	Here's a scan from the 1936 RWS catalog. Note the little loading spoon and the construction of the ring. The RWS barrels were actually numbered to identify the pistol type they belonged to. Number 15 was the 9mm version, 100mm barrel length and 160mm insert barrel length. Other numbers were: Number, calibre, original barrel length, insert barrel length. 14, .30 luger, 95mm, 135mm. 6, .30 luger, 120mm, 160mm. 29, .30 luger, 145mm, 185mm. 31, .30 luger, 200mm, 240mm. 15, 9x19, 100mm, 160mm. 36, 9x19, 120mm, 180mm 27, 9x19, 150mm, 200mm. 16, 202mm, 240mm. Attached Thumbnails

09-02-2009, 03:12 PM	#18
klaus 3338 User Join Date: Jun 2009 Location: Germany Posts: 517 Thanks: 0 Thanked 411 Times in 160 Posts	Weissbrot, nice, nice, very nice. I wish it would be mine! I still have 12 different conversion units in 4mm and picked on one day from a local gunsmith more than 60 units in 4mm but I never saw one like yours before and I know only of two others of them here in Geramny. Really great stuff. Thanks for showing.

09-02-2009, 08:21 PM	#19
weissbrot1 User Join Date: Aug 2009 Posts: 8 Thanks: 0 Thanked 0 Times in 0 Posts	klaus, you are welcome. Thanks to all for their information and enlightenment on a very interesting piece of history. i just wish that information for a bayonet was as available. I think one of the bayonets i have was used in the american revolution by one of my ancestors. He was a Hessian and fought on the wrong side. after the war he remained in america. even the expert? at the quartermaster meuseum in 1964 was unable to furnish any info. thanks again to all. it is good to have somewhere to go to find such a knowledgable group. jerry

11-26-2014, 09:41 PM	#20
sheepherder Lifer Lifetime Forum Patron Join Date: Feb 2009 Location: ...on the 'ol Erie Canal... Posts: 8,182 Thanks: 1,400 Thanked 4,442 Times in 2,330 Posts	Bump! Now that it's ~5 years later and I've seen [pics] of other sub caliber inserts, I can see this one is very different. __________________ I like my coffee the way I like my women... ...Cold and bitter...