p38 lanyards

wombat1299 · 04-15-2004, 05:49 AM

i'm looking for some reproduction P38 lanyards does anybody know where i could get some?
jay

George Anderson · 04-15-2004, 09:57 AM

I believe Jerry Burney may make them.

John Sabato · 04-15-2004, 10:46 AM

You should also check our "sister" website and ask there...

http://www.p38forum.com

If anyone would know where to get them, they would.

wombat1299 · 04-17-2004, 07:12 AM

thanks. i've checked w/ the p38 forum the only answers i got were "check ebay" "they're out there" most informative--not. i got better answers here. jay

lugerholsterrepair · 04-18-2004, 02:23 PM

Jay, Sorry to say I do not make reproduction P-38 Lanyards. I re searched the Luger Lanyard for many years and was able to find enough specs to reproduce those and have probably made and sold a hundred or so.
The real problem with the P-38 lanyard is not in it's specifications but in the availability of the proper materials to make it. The strap is made of a thick OD colored woven material that I have not been able to locate anywhere. During the era these were manufactured the material was not synthetic and as such, anything that is a natural fiber is scarce in today's market to say the least. Were this strapping available it would be a simple matter to replicate this scarce, expensive and desirable Lanyard. This is the only drawback I have found to frustrate this project.
I have noticed quite a few original P-38 Lanyards for sale on eBay from time to time and they go for several hundred dollars. Jerry Burney

Pete Ebbink · 04-18-2004, 06:26 PM

Welcome back, Jerry...!!!

Good to see you back on the boards... <img border="0" alt="[jumper]" title="" src="graemlins/jumper.gif" /> <img border="0" alt="[jumper]" title="" src="graemlins/jumper.gif" />

Hope your recovery is speeding along well...

Regards,

Pete... <img border="0" alt="[typing]" title="" src="graemlins/yltype.gif" />

wombat1299 · 04-20-2004, 08:17 AM

ok i guess a luger lanyard would do. how much would one of your repros cost jerry?
jay

lugerholsterrepair · 04-20-2004, 02:07 PM

Jay, Thanks but at present I have only the parts ready to put together, no completed lanyards.

I am recovering from a full hip replacement surgery and even though I can get around pretty good I am prohibited from bending at the waist past 90 degrees to pick up anything off the floor. Since most of my workshop involves at least some of my parts and pieces being on the floor it is difficult to access what I need for a little while longer.

I am hoping my full recovery is emminant and I will be back at work soon.

To answer your question, I sell the Cavalry Luger Lanyard for $65.00.It is quite long and goes over the shoulder to the pistol in the holster. The Stosstrup style is shorter and hangs the pistol at about waist height, worn around the neck and is the same price.

Thanks Pete, It's an uphill struggle but must be done....Thanks. Jerry Burney

wombat1299 · 04-21-2004, 07:09 AM

i guess until you get better i'll continue my search. my mom had her hip replaced twice so i kind of know about your difficulties. take her easy and get better and i'll see ya on the DZ
jay

05-05-2004, 07:54 PM

I have an original German issue P38 lanyard, they came in two styles a leather version which I have never seen and a woven version. If you email me I can send you a selection of pictures with detail.
The few that are making it to ebay are coming out of captured German stocks in Norway, I will also put you in contact with the person who I purchased my lanyard from.
Regards,
Hessian

04-15-2004, 05:49 AM	#1
wombat1299 New User Join Date: Apr 2004 Posts: 4 Thanks: 0 Thanked 0 Times in 0 Posts	p38 lanyards i'm looking for some reproduction P38 lanyards does anybody know where i could get some? jay

04-15-2004, 10:46 AM	#3
John Sabato Lifer Lifetime Forum Patron Join Date: Jun 2002 Location: The Capital of the Free World Posts: 10,153 Thanks: 3,003 Thanked 2,304 Times in 1,096 Posts	You should also check our "sister" website and ask there... http://www.p38forum.com If anyone would know where to get them, they would. __________________ regards, -John S "...We hold these truths to be self-evident that ALL men are created EQUAL *and are endowed by their Creator* with certain UNALIENABLE* rights, and among these are life, LIBERTY, and the pursuit of happiness..."*

04-18-2004, 02:23 PM	#5
lugerholsterrepair Moderator Lifetime Forum Patron Join Date: Jun 2002 Location: Arizona/Colorado Posts: 7,766 Thanks: 4,883 Thanked 3,121 Times in 1,432 Posts	Jay, Sorry to say I do not make reproduction P-38 Lanyards. I re searched the Luger Lanyard for many years and was able to find enough specs to reproduce those and have probably made and sold a hundred or so. The real problem with the P-38 lanyard is not in it's specifications but in the availability of the proper materials to make it. The strap is made of a thick OD colored woven material that I have not been able to locate anywhere. During the era these were manufactured the material was not synthetic and as such, anything that is a natural fiber is scarce in today's market to say the least. Were this strapping available it would be a simple matter to replicate this scarce, expensive and desirable Lanyard. This is the only drawback I have found to frustrate this project. I have noticed quite a few original P-38 Lanyards for sale on eBay from time to time and they go for several hundred dollars. Jerry Burney __________________ Jerry Burney 11491 S. Guadalupe Drive Yuma AZ 85367-6182 lugerholsterrepair@earthlink.net 928 342-7583 (CO & AZ) Year Round 719 207-3331 (cell) "For those who Fight For It, Life has a flavor the protected will never know."

04-20-2004, 02:07 PM	#8
lugerholsterrepair Moderator Lifetime Forum Patron Join Date: Jun 2002 Location: Arizona/Colorado Posts: 7,766 Thanks: 4,883 Thanked 3,121 Times in 1,432 Posts	Jay, Thanks but at present I have only the parts ready to put together, no completed lanyards. I am recovering from a full hip replacement surgery and even though I can get around pretty good I am prohibited from bending at the waist past 90 degrees to pick up anything off the floor. Since most of my workshop involves at least some of my parts and pieces being on the floor it is difficult to access what I need for a little while longer. I am hoping my full recovery is emminant and I will be back at work soon. To answer your question, I sell the Cavalry Luger Lanyard for $65.00.It is quite long and goes over the shoulder to the pistol in the holster. The Stosstrup style is shorter and hangs the pistol at about waist height, worn around the neck and is the same price. Thanks Pete, It's an uphill struggle but must be done....Thanks. Jerry Burney __________________ Jerry Burney 11491 S. Guadalupe Drive Yuma AZ 85367-6182 lugerholsterrepair@earthlink.net 928 342-7583 (CO & AZ) Year Round 719 207-3331 (cell) "For those who Fight For It, Life has a flavor the protected will never know."

04-15-2004, 09:57 AM	#2
George Anderson Lifer Lifetime Forum Patron Join Date: Jul 2002 Location: VA Posts: 3,592 Thanks: 1,773 Thanked 2,528 Times in 787 Posts	I believe Jerry Burney may make them.

04-17-2004, 07:12 AM	#4
wombat1299 New User Join Date: Apr 2004 Posts: 4 Thanks: 0 Thanked 0 Times in 0 Posts	thanks. i've checked w/ the p38 forum the only answers i got were "check ebay" "they're out there" most informative--not. i got better answers here. jay

04-18-2004, 06:26 PM	#6
Pete Ebbink User Join Date: Jun 2002 Location: The USA Posts: 5,919 Thanks: 0 Thanked 6 Times in 4 Posts	Welcome back, Jerry...!!! Good to see you back on the boards... <img border="0" alt="[jumper]" title="" src="graemlins/jumper.gif" /> <img border="0" alt="[jumper]" title="" src="graemlins/jumper.gif" /> Hope your recovery is speeding along well... Regards, Pete... <img border="0" alt="[typing]" title="" src="graemlins/yltype.gif" />

04-20-2004, 08:17 AM	#7
wombat1299 New User Join Date: Apr 2004 Posts: 4 Thanks: 0 Thanked 0 Times in 0 Posts	ok i guess a luger lanyard would do. how much would one of your repros cost jerry? jay

04-21-2004, 07:09 AM	#9
wombat1299 New User Join Date: Apr 2004 Posts: 4 Thanks: 0 Thanked 0 Times in 0 Posts	i guess until you get better i'll continue my search. my mom had her hip replaced twice so i kind of know about your difficulties. take her easy and get better and i'll see ya on the DZ jay

05-05-2004, 07:54 PM	#10
Hessian Guest Posts: n/a	I have an original German issue P38 lanyard, they came in two styles a leather version which I have never seen and a woven version. If you email me I can send you a selection of pictures with detail. The few that are making it to ebay are coming out of captured German stocks in Norway, I will also put you in contact with the person who I purchased my lanyard from. Regards, Hessian