Quote:
Originally Posted by postino
I made a tongue & groove join because it gives me maximum surface area; I don't want it tight because that would cause the glue/epoxy to be scraped off when I push it on. I have an easy slip join now, with no twist.
|
That's kind of what I thought. The only way to get a strong joint with wood glue (type Titebond) is to taper it slightly so the surfaces are wedged against each other as you tap it in. And no, I wouldn't want to cut such a joint either.
Like you said in a previous post, you'll need something that fills the joint, and it doesn't need to shrink either.