![]() |
Reloads for luger
Do any of you have a good loads for a 9mm? I took mine to the range today and had a bunch of stovepipes. After I came home I loaded up some others and it seemed to work fine, but not with the others that I have loaded.
Brent |
Re: Reloads for luger
Brent; I use 6gr of Unique with a 115gr Win JHP seated out to 1.150 in all my Lugers. If you have a good magazine spring and everthing else is ok, this should eliminate any stovepipes.
Lonnie |
Re: am I the only reloader?? (EOM)
|
Re: am I the only reloader??
Nope, just fired your K date today with reloads! Thor
|
Re: am I the only reloader??
No, but I have been tooooo lazy to put everthing back up, so haven't reloaded, in oh, about 12 years.
Moving does that too you, everything was in boxes for 7 years and I have been back in the states the last 2... Excuses, excuses. Ed |
Re: Reloads for luger
I load 115-grain full metal jackets on top of six grains of Unique. These have worked fine for me.
|
Re: am I the only reloader??
![]() These 9 mm are like rimfires, too much trouble to reload. Now my 45-110 Sahrps, thats a reload.
|
Re: Reloads for luger
I have several good loads for the 7.65. In the 9mm I use 6.3 Unique or 5.4 IMR7625 with 115 gr Silvertips or Sierra HP's.
|
Re: am I the only reloader??
Thor; what was the oal with the 124 gr bullets. I assume they were FMJ.
Lonnie |
Re: Reloads for luger
Hugh; where do you find the silvertips? The best factory load I have found for the 9mm is the Win 115 gr Silvertip, but they are to spendy for target shooting.
Lonnie |
Re: Reloads for luger
You can get them as components from Midway USA! ~thor~
|
Re: am I the only reloader??
OAL was 1.15" with a Hornady 124 FMJ ~thor~
|
| All times are GMT -4. The time now is 11:26 AM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
Copyright © 1998 - 2026, Lugerforum.com