cocking problem

Lugerdoc · 01-31-2020, 10:33 AM

C148, As said above LUGER PARTS ARE NOT INTERCHANGEABLE. If in fact, your striker (FP) is cocking on your sear (trigger bar) but not releasing when the trigger is pulled, it's possible that you have too much overlap of these parts, but more likely, the trigger LEVER (inside the side plate) is not correctly chamfered at the top for the disconnector plunger (in the trigger BAR) to push under it on recoil. Too bad that you're not in the USA, so that I could take a look at it, but I know that their are many PO8 collectors in Canada, that would be willing to assist. TH

01-31-2020, 10:33 AM	#10
Lugerdoc Patron LugerForum Patron Join Date: Jun 2002 Location: POB 398 St.Charles,MO. 63302 Posts: 5,089 Thanks: 6 Thanked 737 Times in 484 Posts	C148, As said above LUGER PARTS ARE NOT INTERCHANGEABLE. If in fact, your striker (FP) is cocking on your sear (trigger bar) but not releasing when the trigger is pulled, it's possible that you have too much overlap of these parts, but more likely, the trigger LEVER (inside the side plate) is not correctly chamfered at the top for the disconnector plunger (in the trigger BAR) to push under it on recoil. Too bad that you're not in the USA, so that I could take a look at it, but I know that their are many PO8 collectors in Canada, that would be willing to assist. TH __________________ Tom Heller POB 398 ST.Charles, MO. 63302 Tel 636-447-3006 lugerdoc@charter.net