broom handle hammer not locking back

alvin · 06-08-2015, 06:10 AM

Before chasing on that broken mixmaster in pawn shop, probably want to check this one out:

http://www.gunauction.com/buy/13417910

This one has a mismatched magazine floor. But that floor is not a moving part, so won't affect gun functioning.

Install a firing pin and safety lever, it will be fully functional. Aftermarket firing pins are available on gunbroker.com and ebay. Repro stock is flooding on ebay.

Of course, if this one goes too high, then return to pawn shop.

06-08-2015, 06:10 AM	#4
alvin User Join Date: Jul 2007 Location: US Posts: 3,843 Thanks: 132 Thanked 729 Times in 438 Posts	Before chasing on that broken mixmaster in pawn shop, probably want to check this one out: http://www.gunauction.com/buy/13417910 This one has a mismatched magazine floor. But that floor is not a moving part, so won't affect gun functioning. Install a firing pin and safety lever, it will be fully functional. Aftermarket firing pins are available on gunbroker.com and ebay. Repro stock is flooding on ebay. Of course, if this one goes too high, then return to pawn shop.