extracting problem

policeluger · 10-31-2010, 12:45 PM

Try cutting/spliting a 8" or so, some what under size soft wood dowl about 3/4" down.....a hack saw blade works great for this, from one end, wrap.....using split to hold cloth, a small strip of coucus (sp) cloth until very tight fit in chamber, from the back of course....try spining it with a drill and only polish a thousands or so of the chamber....works all the time

10-31-2010, 12:45 PM	#3
policeluger RIP Join Date: Jun 2002 Location: Ca. Posts: 2,141 Thanks: 8 Thanked 89 Times in 54 Posts	Try cutting/spliting a 8" or so, some what under size soft wood dowl about 3/4" down.....a hack saw blade works great for this, from one end, wrap.....using split to hold cloth, a small strip of coucus (sp) cloth until very tight fit in chamber, from the back of course....try spining it with a drill and only polish a thousands or so of the chamber....works all the time