Relined Luger Barrels

ViggoG · 05-14-2001, 03:53 PM

ART B !!!!

I hope that there is some mistake in your statement

of re-boring a 7.65 mm to 9 mm , as this would thin

the wall of the barrel by about .026 + inches, which

in my opinion has the probability of turning this fine

gun into an unpredictable BOMB !!!

Sorry thats my opinion based on 36 years of experience

as a NASA Technician and Certified Product Engineer.

If you intend to go this route please have this weapon Proof tested and recertified as safe to fire under all conditions .

For your sake I hope this advice reaches you in time

and any other that may try to enlarge the bore of any firearm.

My well intentioned $.02 worth.

ViggoG

05-14-2001, 03:53 PM	#12
ViggoG RIP Join Date: Jun 2002 Location: South Side Virginia Posts: 534 Thanks: 0 Thanked 1 Time in 1 Post	Re: There was a shop that relined Luger barrels in Ohio Ted... ART B !!!! I hope that there is some mistake in your statement of re-boring a 7.65 mm to 9 mm , as this would thin the wall of the barrel by about .026 + inches, which in my opinion has the probability of turning this fine gun into an unpredictable BOMB !!! Sorry thats my opinion based on 36 years of experience as a NASA Technician and Certified Product Engineer. If you intend to go this route please have this weapon Proof tested and recertified as safe to fire under all conditions . For your sake I hope this advice reaches you in time and any other that may try to enlarge the bore of any firearm. My well intentioned $.02 worth. ViggoG