Toggle link question?

Lugerdoc · 01-23-2013, 10:57 AM

As Ron stated above, the overall toggle dimentions are about the same. The dimentional difference between long & short frame is in the receiver (barrel extention), which is an 1/8" longer in the theaded area. THe M1900 mid toggle link may look similar to a later DWM PO8 link, but the angle of the cocking arm is different and thicker, so that only the flat surface of the M1900 FP will work with it. A standard round PO8 FP will not pass it. Finally, to use a standard rear toggle link in a M1900, your will have to use the shorter M1900 "S" shaped connecting (to the flat main spring) link, or the toggle will not open fully. TH

01-23-2013, 10:57 AM	#7
Lugerdoc Patron LugerForum Patron Join Date: Jun 2002 Location: POB 398 St.Charles,MO. 63302 Posts: 5,089 Thanks: 6 Thanked 737 Times in 484 Posts	As Ron stated above, the overall toggle dimentions are about the same. The dimentional difference between long & short frame is in the receiver (barrel extention), which is an 1/8" longer in the theaded area. THe M1900 mid toggle link may look similar to a later DWM PO8 link, but the angle of the cocking arm is different and thicker, so that only the flat surface of the M1900 FP will work with it. A standard round PO8 FP will not pass it. Finally, to use a standard rear toggle link in a M1900, your will have to use the shorter M1900 "S" shaped connecting (to the flat main spring) link, or the toggle will not open fully. TH __________________ Tom Heller POB 398 ST.Charles, MO. 63302 Tel 636-447-3006 lugerdoc@charter.net