AIMCO still in production

Ponyman · 04-02-2006, 01:33 AM

Steve and Chris -

As far as we can tell, there is only one maker working in stainless: Mr Romo. Various names have been used on his creations through the years, depending on which distributor he was working with at the time - but ALL of the stainless guns originated in his facility. I'll try to post photos of the right sides of my three Texas-built Lugers, but it may take several days to get that done. The markings shown in the gallery photo Chris posted above appear to be consistent with my Mitchell, but that album belongs to John Sabato and he can probably provide the details.

04-02-2006, 01:33 AM	#22
Ponyman User Join Date: Feb 2005 Location: Atlantic County, NJ, USA Posts: 138 Thanks: 0 Thanked 1 Time in 1 Post	Steve and Chris - As far as we can tell, there is only one maker working in stainless: Mr Romo. Various names have been used on his creations through the years, depending on which distributor he was working with at the time - but ALL of the stainless guns originated in his facility. I'll try to post photos of the right sides of my three Texas-built Lugers, but it may take several days to get that done. The markings shown in the gallery photo Chris posted above appear to be consistent with my Mitchell, but that album belongs to John Sabato and he can probably provide the details. __________________ "The Constitution is intended for use by a moral and religious people. It is wholly inadequate for the governance of any other." ~ John Quincy Adams