7mm ammo

hayhugh · 07-01-2015, 12:02 PM

would any one happen to have any dummy 7mm baby nambu ammo? Thank you, Hugh

Edward Tinker · 07-01-2015, 02:07 PM

$50 a round for original

I have two, not really want to sell them, HOWEVER, I have 7mm that is made by a guy named Mr Nambu, I bought a box when I had my 7mm Baby, would have to figure out if I still have the box. It did not work well for me in that baby.

Ed

hayhugh · 07-01-2015, 06:04 PM

Yes, I found Mr. Nambu thru the web and sent him and email about his 7mm Baby Nambu ammo. I have a reproduction Baby Nambu that functions like a real gun. Will load from magazine, eject bullet and strip down like real gun but will not fire. From factory it was supplied with 8/10 dummy rounds but they are no longer with gun. Little hesitant about putting live ammo in gun that will be slamming rounds around with no place for them to exit...

jonnyc · 07-02-2015, 12:48 AM

Ed, you have two 7mm Nambu ball rounds or dummies???

Original ball rounds usually go for $20-25 each, but original dummies are super rare, and they only exist in maybe 6-10 collections in the US. I got a good deal on mine for about $300-500. It's been a while, don't recall the exact number.

Edward Tinker · 07-02-2015, 01:23 AM

two live rounds

I was told $50 each but that was from a friend a few years ago

jonnyc · 07-02-2015, 01:28 PM

Phew! If they were dummies I would be directing a home invasion right now!!!

hayhugh · 07-02-2015, 03:14 PM

At this price you get the gun for the price of the bullets:

http://www.wwiiguns.com/store/product_details.php?p=229

hayhugh · 07-02-2015, 07:20 PM

I am not buying anything from them. Just posting the gun I purchased for less then half of what they are asking, This one shows the blanks that came with the gun but are no longer present. Seems to hold more interest to me then the "unique double barreled luger" that sold for more then 10 times what I paid for this Baby Nambu...Both will function abut the same!

hayhugh · 07-02-2015, 08:56 PM

http://www.wwiiguns.com/store/product_details.php?p=229 This will have to do until my new purchase arrives in the mail.. Nave not heard back from Mr Nambu yet

hayhugh · 07-03-2015, 09:03 PM

Someone added a post to this thread and mentioned that he thought the cartridges could be reloaded, he also said that he would not have any dealing with a certain company that was mentioned, I come back to this post and find his comments have been removed. That certainly does not help me any. Why did he/someone remove information that I came back to retrieve? Did not even know that could be done.

hayhugh · 07-03-2015, 10:47 PM

Just say I get ahold of some 7mm Nambu cartridges, how would I make them inert and what tools would I need? I have never reloaded any ammo! Be very specific. Thank you, Hugh

ithacaartist · 07-04-2015, 12:00 PM

Without the tools/press to remove the primers, I think the easiest way would be to get the bullet-removing hammer (about $15 at Midway, Brownell's, eBay, etc.) to extract the projectiles and powder from them, then fire off the rounds with just primers--one at a time, feeding by hand-- then re-seat the bullets by hand. About the best that can be accomplished without proper tooling/press, I think.

Ron Wood · 07-04-2015, 01:03 PM

If you don't want a dent in the dummy cartridge primer, after pulling the bullet and dumping the powder a drop of light oil in the case will "kill" the primer and render it inert.

hayhugh · 07-04-2015, 02:13 PM

Thank you gentlemen, drop of oil eliminates the primer problem and Kinetic hammer ordered with "vise chuck" as the others started at .22 hornet size.

rhuff · 07-04-2015, 04:45 PM

After you remove the bullet with the kinetic puller and dump the powder, the brass neck may still have tension since it was not fired/expanded. Just take your time putting the bullet back into the case neck so as not to damage/bend it. You may have to "bell" the case mouth a little to get the bullet to start into the brass case.

07-01-2015, 12:02 PM	#1
hayhugh User Join Date: Oct 2013 Location: Florida/Penna Posts: 896 Thanks: 856 Thanked 513 Times in 275 Posts	7mm ammo would any one happen to have any dummy 7mm baby nambu ammo? Thank you, Hugh

07-02-2015, 07:20 PM	#8
hayhugh User Join Date: Oct 2013 Location: Florida/Penna Posts: 896 Thanks: 856 Thanked 513 Times in 275 Posts	I am not buying anything from them. Just posting the gun I purchased for less then half of what they are asking, This one shows the blanks that came with the gun but are no longer present. Seems to hold more interest to me then the "unique double barreled luger" that sold for more then 10 times what I paid for this Baby Nambu...Both will function abut the same! Last edited by hayhugh; 07-02-2015 at 07:22 PM. Reason: More info.

07-04-2015, 12:00 PM	#12
ithacaartist Twice a Lifer Lifetime Forum Patron Join Date: Mar 2011 Location: Atop the highest hill in Schuyler County NY Posts: 3,346 Thanks: 7,273 Thanked 2,578 Times in 1,365 Posts	Without the tools/press to remove the primers, I think the easiest way would be to get the bullet-removing hammer (about $15 at Midway, Brownell's, eBay, etc.) to extract the projectiles and powder from them, then fire off the rounds with just primers--one at a time, feeding by hand-- then re-seat the bullets by hand. About the best that can be accomplished without proper tooling/press, I think. __________________ "... Liberty is the seed and soil, the air and light, the dew and rain of progress, love and joy."-- Robert Greene Ingersoll 1894

07-04-2015, 01:03 PM	#13
Ron Wood Moderator 2010 LugerForum Patron Join Date: Jun 2002 Location: Santa Teresa New Mexico just outside of the West Texas town of El Paso Posts: 7,022 Thanks: 1,090 Thanked 5,178 Times in 1,703 Posts	If you don't want a dent in the dummy cartridge primer, after pulling the bullet and dumping the powder a drop of light oil in the case will "kill" the primer and render it inert. __________________ If it's made after 1918...it's a reproduction

07-01-2015, 02:07 PM	#2
Edward Tinker Super Moderator Eternal Lifer LugerForum Patron Join Date: Jun 2002 Location: North of Spokane, WA Posts: 15,933 Thanks: 2,032 Thanked 4,530 Times in 2,092 Posts	$50 a round for original I have two, not really want to sell them, HOWEVER, I have 7mm that is made by a guy named Mr Nambu, I bought a box when I had my 7mm Baby, would have to figure out if I still have the box. It did not work well for me in that baby. Ed

07-01-2015, 06:04 PM	#3
hayhugh User Join Date: Oct 2013 Location: Florida/Penna Posts: 896 Thanks: 856 Thanked 513 Times in 275 Posts	Yes, I found Mr. Nambu thru the web and sent him and email about his 7mm Baby Nambu ammo. I have a reproduction Baby Nambu that functions like a real gun. Will load from magazine, eject bullet and strip down like real gun but will not fire. From factory it was supplied with 8/10 dummy rounds but they are no longer with gun. Little hesitant about putting live ammo in gun that will be slamming rounds around with no place for them to exit...

07-02-2015, 12:48 AM	#4
jonnyc User Join Date: Dec 2008 Posts: 425 Thanks: 2 Thanked 46 Times in 34 Posts	Ed, you have two 7mm Nambu ball rounds or dummies??? Original ball rounds usually go for $20-25 each, but original dummies are super rare, and they only exist in maybe 6-10 collections in the US. I got a good deal on mine for about $300-500. It's been a while, don't recall the exact number.

07-02-2015, 01:23 AM	#5
Edward Tinker Super Moderator Eternal Lifer LugerForum Patron Join Date: Jun 2002 Location: North of Spokane, WA Posts: 15,933 Thanks: 2,032 Thanked 4,530 Times in 2,092 Posts	two live rounds I was told $50 each but that was from a friend a few years ago

07-02-2015, 01:28 PM	#6
jonnyc User Join Date: Dec 2008 Posts: 425 Thanks: 2 Thanked 46 Times in 34 Posts	Phew! If they were dummies I would be directing a home invasion right now!!!

07-02-2015, 03:14 PM	#7
hayhugh User Join Date: Oct 2013 Location: Florida/Penna Posts: 896 Thanks: 856 Thanked 513 Times in 275 Posts	At this price you get the gun for the price of the bullets: http://www.wwiiguns.com/store/product_details.php?p=229

07-02-2015, 08:56 PM	#9
hayhugh User Join Date: Oct 2013 Location: Florida/Penna Posts: 896 Thanks: 856 Thanked 513 Times in 275 Posts	http://www.wwiiguns.com/store/product_details.php?p=229 This will have to do until my new purchase arrives in the mail.. Nave not heard back from Mr Nambu yet

07-03-2015, 09:03 PM	#10
hayhugh User Join Date: Oct 2013 Location: Florida/Penna Posts: 896 Thanks: 856 Thanked 513 Times in 275 Posts	Someone added a post to this thread and mentioned that he thought the cartridges could be reloaded, he also said that he would not have any dealing with a certain company that was mentioned, I come back to this post and find his comments have been removed. That certainly does not help me any. Why did he/someone remove information that I came back to retrieve? Did not even know that could be done.

07-03-2015, 10:47 PM	#11
hayhugh User Join Date: Oct 2013 Location: Florida/Penna Posts: 896 Thanks: 856 Thanked 513 Times in 275 Posts	Just say I get ahold of some 7mm Nambu cartridges, how would I make them inert and what tools would I need? I have never reloaded any ammo! Be very specific. Thank you, Hugh

07-04-2015, 02:13 PM	#14
hayhugh User Join Date: Oct 2013 Location: Florida/Penna Posts: 896 Thanks: 856 Thanked 513 Times in 275 Posts	Thank you gentlemen, drop of oil eliminates the primer problem and Kinetic hammer ordered with "vise chuck" as the others started at .22 hornet size.

07-04-2015, 04:45 PM	#15
rhuff Patron LugerForum Patron Join Date: Mar 2011 Location: Az. Posts: 2,291 Thanks: 2,709 Thanked 972 Times in 717 Posts	After you remove the bullet with the kinetic puller and dump the powder, the brass neck may still have tension since it was not fired/expanded. Just take your time putting the bullet back into the case neck so as not to damage/bend it. You may have to "bell" the case mouth a little to get the bullet to start into the brass case.