Numbering system mismatch

shadow · 04-11-2006, 01:54 AM

In the Ã¢??technical informationÃ¢?Â, Ã¢??parts list and disassemblyÃ¢?Â page, the numbering system on the parts list does not match the numbering system on the disassembly illustration. Is there any way we can get these to match? If nothing else it would make things easier for us Luger newbies.

Edward Tinker · 04-11-2006, 10:33 AM

not easily, they are taken from two different manuals.

Now, if someone blows them way up and manually marks over and then changes them, I am sure that John would post the updated chart...

Ed

shadow · 04-11-2006, 01:32 PM

I will give it a first attempt tonight. As a Luger newbie it will be interesting to see what I come up with.

John Sabato · 04-11-2006, 02:13 PM

IF you build it, I will post it!

shadow · 04-12-2006, 08:16 AM

I decided that it was easier to change the parts list to match the illustration since the parts list included small parts that are not illustrated, such as a magazine breakdown, and disconnecter parts. When I find time, I will attempt to add these sub assemblies to the illustration.

Here is the current list:

001 Front sight
002 Barrel
003 Extractor
004 Forward link of toggle joint
005 Extractor spring
006 Rear link of toggle joint
007 Connecting pin between forward and rear link
008 Coupling link for recoil spring pin
009 Coupling link for recoil spring
010 Breechblock
011 Extractor pin or rivet
012 Connecting pin between breechblock and forward link
013 Firing pin
014 Firing pin spring
015 Breechblock end piece
016 Ejector
017 Receiver or barrel extension
018 Trigger bar or sear
019 Trigger bar or sear spring
020 Connecting pin between rear link and receiver
021 Magazine holder catch
022 Breechblock catch link or holdopen
023 Recoil spring lever
024 Frame
025 Locking bolt
026 Trigger
027 Trigger spring
028 Magazine holder catch spring
029 Safety catch or thumb safety lever pin
030 Recoil spring lever pin
031 Safety sear
032 Safety catch or thumb safety lever
033 Recoil spring
034 Recoil spring lever bar
035 right grip
036 grip screw right
037 left grip
038 grip screw left
039 Trigger plate, trigger cover plate or side plate
040 Magazine
107 Trigger lever pin
108 Trigger lever

I did increased the resolution of the exploded view, increased the size by 30%, then changed the contrast to sharpen the image so that it looks better at the size presented on the site.
Here is the image.
http://forum.lugerforum.com/lfupload/luger_copy3.jpg

04-11-2006, 01:54 AM	#1
shadow User Join Date: Jan 2006 Location: Down The Shore Posts: 245 Thanks: 1 Thanked 6 Times in 4 Posts	Numbering system mismatch In the Ã¢??technical informationÃ¢?Â, Ã¢??parts list and disassemblyÃ¢?Â page, the numbering system on the parts list does not match the numbering system on the disassembly illustration. Is there any way we can get these to match? If nothing else it would make things easier for us Luger newbies.

04-11-2006, 10:33 AM	#2
Edward Tinker Super Moderator Eternal Lifer LugerForum Patron Join Date: Jun 2002 Location: North of Spokane, WA Posts: 15,930 Thanks: 2,030 Thanked 4,527 Times in 2,090 Posts	not easily, they are taken from two different manuals. Now, if someone blows them way up and manually marks over and then changes them, I am sure that John would post the updated chart... Ed __________________ Edward Tinker ************ Co-Author of Police Lugers - Co-Author of Simson Lugers Author of Veteran Bring Backs Vol I, Vol II, Vol III and Vol IV

04-11-2006, 01:32 PM	#3
shadow User Join Date: Jan 2006 Location: Down The Shore Posts: 245 Thanks: 1 Thanked 6 Times in 4 Posts	I will give it a first attempt tonight. As a Luger newbie it will be interesting to see what I come up with. __________________ The very atmosphere of firearms anywhere and everywhere restrains evil interference - they deserve a place of honor with all that's good. George Washington

04-11-2006, 02:13 PM	#4
John Sabato Lifer Lifetime Forum Patron Join Date: Jun 2002 Location: The Capital of the Free World Posts: 10,154 Thanks: 3,003 Thanked 2,306 Times in 1,097 Posts	IF you build it, I will post it! __________________ regards, -John S "...We hold these truths to be self-evident that ALL men are created EQUAL *and are endowed by their Creator* with certain UNALIENABLE* rights, and among these are life, LIBERTY, and the pursuit of happiness..."*

04-12-2006, 08:16 AM	#5
shadow User Join Date: Jan 2006 Location: Down The Shore Posts: 245 Thanks: 1 Thanked 6 Times in 4 Posts	I decided that it was easier to change the parts list to match the illustration since the parts list included small parts that are not illustrated, such as a magazine breakdown, and disconnecter parts. When I find time, I will attempt to add these sub assemblies to the illustration. Here is the current list: 001 Front sight 002 Barrel 003 Extractor 004 Forward link of toggle joint 005 Extractor spring 006 Rear link of toggle joint 007 Connecting pin between forward and rear link 008 Coupling link for recoil spring pin 009 Coupling link for recoil spring 010 Breechblock 011 Extractor pin or rivet 012 Connecting pin between breechblock and forward link 013 Firing pin 014 Firing pin spring 015 Breechblock end piece 016 Ejector 017 Receiver or barrel extension 018 Trigger bar or sear 019 Trigger bar or sear spring 020 Connecting pin between rear link and receiver 021 Magazine holder catch 022 Breechblock catch link or holdopen 023 Recoil spring lever 024 Frame 025 Locking bolt 026 Trigger 027 Trigger spring 028 Magazine holder catch spring 029 Safety catch or thumb safety lever pin 030 Recoil spring lever pin 031 Safety sear 032 Safety catch or thumb safety lever 033 Recoil spring 034 Recoil spring lever bar 035 right grip 036 grip screw right 037 left grip 038 grip screw left 039 Trigger plate, trigger cover plate or side plate 040 Magazine 107 Trigger lever pin 108 Trigger lever I did increased the resolution of the exploded view, increased the size by 30%, then changed the contrast to sharpen the image so that it looks better at the size presented on the site. Here is the image. http://forum.lugerforum.com/lfupload/luger_copy3.jpg