magazine tool

Ray · 06-12-2024, 12:47 AM

I am looking for a variation of this tool to make loading of the clip easier. with a new Mec Gar magazine, its difficult to load even 4 rounds.
Ray

ithacaartist · 06-12-2024, 01:49 AM

Ray, your quest may be better served by moving this post to the WTB section.

Here's a repro for less than ten bucks. https://www.keepshooting.com/luger-tool.html If it's just for shooting, this will do the trick. The important part is the thin lip on one edge of the hole. Hook that lip over the follower button on the mag, pull the follower down using the short leg of the tool, and Bob's your uncle!

velodog455~ · 06-12-2024, 09:43 AM

Bunches of 'em on Ebay.

Eugen · 06-12-2024, 11:17 AM

Yes, one has to be a masochist to want to load a Luger mag by hand. Unfortunately my single and dual stack 9mm MagLula's that work wonderfully on all other mags, do not work with Luger mags of any manufacturer.

Lastly, I found that my one repop Luger tool does not work well with my MegGar or other mags. I guess they are for show only.

DTR04 · 06-12-2024, 12:18 PM

A modern take on the loading tool. Works well and can latch the follower down for easy internal cleaning.

https://www.ebay.com/itm/272342423009

ithacaartist · 06-12-2024, 08:21 PM

Quote:

Originally Posted by Eugen

... found that my one repop Luger tool does not work well with my MegGar or other mags. I guess they are for show only.

The lip I mentioned is virtually non-existent on some of the cheap ones. If there's nothing to securely snag the follower button, you're in for a world of hurt. Review the available pics to check for that lip on whatever is under consideration, and take a pass on whatever lacks the pics to confirm this.

06-12-2024, 12:47 AM	#1
Ray Patron LugerForum Patron Join Date: Jun 2002 Location: Oregon Posts: 127 Thanks: 2 Thanked 37 Times in 16 Posts	magazine tool I am looking for a variation of this tool to make loading of the clip easier. with a new Mec Gar magazine, its difficult to load even 4 rounds. Ray

06-12-2024, 01:49 AM	#2
ithacaartist Twice a Lifer Lifetime Forum Patron Join Date: Mar 2011 Location: Atop the highest hill in Schuyler County NY Posts: 3,346 Thanks: 7,273 Thanked 2,578 Times in 1,365 Posts	Ray, your quest may be better served by moving this post to the WTB section. Here's a repro for less than ten bucks. https://www.keepshooting.com/luger-tool.html If it's just for shooting, this will do the trick. The important part is the thin lip on one edge of the hole. Hook that lip over the follower button on the mag, pull the follower down using the short leg of the tool, and Bob's your uncle! __________________ "... Liberty is the seed and soil, the air and light, the dew and rain of progress, love and joy."-- Robert Greene Ingersoll 1894

06-12-2024, 11:17 AM	#4
Eugen User Join Date: Apr 2016 Location: Newburgh,IN Posts: 790 Thanks: 394 Thanked 631 Times in 334 Posts	Yes, one has to be a masochist to want to load a Luger mag by hand. Unfortunately my single and dual stack 9mm MagLula's that work wonderfully on all other mags, do not work with Luger mags of any manufacturer. Lastly, I found that my one repop Luger tool does not work well with my MegGar or other mags. I guess they are for show only. __________________ “God created war so that Americans would learn geography.” ― Mark Twain

06-12-2024, 09:43 AM	#3
velodog455~ User Join Date: Aug 2023 Posts: 76 Thanks: 18 Thanked 58 Times in 35 Posts	Bunches of 'em on Ebay.

06-12-2024, 12:18 PM	#5
DTR04 User Join Date: Oct 2005 Location: Texas Posts: 52 Thanks: 92 Thanked 36 Times in 18 Posts	A modern take on the loading tool. Works well and can latch the follower down for easy internal cleaning. https://www.ebay.com/itm/272342423009