Luger Dummies, where to find ? - Page 2

John Sabato · 07-24-2013, 09:01 AM

Quote:

Originally Posted by Dwight Gruber

3-D printing!

That will work fine Dwight... but little has been said about the COST of 3D printing... it ain't cheap!

lugerholsterrepair · 07-24-2013, 11:22 AM

Alx, An admirable job and if it suits your tastes so much the better. I keep about 50 wooden inserts here and occasionally place one in a clients holster as a courtesy if the pocket is squishy. While I am working a holster on my bench I almost always slip one in to keep from flexing the mag pouch un necessarily.

Mag pouches vary so much you often see problems with the way it was originally made show up in split seams or out of shape notches, bent over tops etc. I have seen many a holster that would not take an original magazine. Tool pouches can be the same way.

In the shop I probably see at least a half dozen Luger holsters a week. In putting wooden inserts in and out some fit, some don't and some fit better than others. The end pulls RARELY fit either front or back..they fit one way and you turn the mag around and it doesn't fit. They can be especially weird on double mag pouches.

I think Dwight's idea is a good one..Depending of course on how much each copy on a 3-D printer is!

hansfischer007 · 07-24-2013, 03:22 PM

What is the link to WE Lugers..?...I would be interested in getting a Navy or Artillery model for a display......many years ago I picked up one of the japanese metal artillery lugers.......looked good....and I put it in a display for my older son.......after his divorce....he couldnt find it anymore....and we think his ex gave it to one of her relatives or just dumped it.........anyway....Im interested in getting another similar one if possible.....this time for MY display.....any help is appreciated.....Thanks.....Hans Fischer

Alx · 07-24-2013, 04:23 PM

http://www.airsoftmegastore.com/1548...0390338tm.aspx

The red tip might be screwed in, or just pressed on, 'seen them both ways. Either way, they will detatch and leave the gun looking very realistic. WE also makes grip panels of a better-looking brown plastic.

http://www.airsplat.com/Items/GP-WE-LUGER-P08.htm

http://www.shortyusa.com/airsoft.htm...&searchstring=

http://www.airsoftgi.com/product_inf...oducts_id=3151

http://www.airsoftmegastore.com/4554...IUM-Model.aspx

http://www.evike.com/product_info.php?products_id=3682

These are some sources for the WE popguns. There may be an airsoft gun dealer store in your area, that might have them on hand. Prob. less $ to buy them online.

Vlim · 07-24-2013, 04:41 PM

A problem with old leather is that many of the holsters have shrunk a little over time, so even when the magazine or gun substitute is of the right size, the holster may have problems fitting them.

I have a couple of holsters here that cannot close correctly with a gun / magazine in place.

kzullick · 07-24-2013, 04:45 PM

What about the luger BB guns they make today? Will they work?

Alx · 07-24-2013, 05:04 PM

If you mean the plastic 6mm "BB"s then that is what the WE airsoft Lugers shoot.
If there are any Luger copies that fire metal BBs, I don't know of them.

As of holsters that have shrunk too far to close around the gun, maybe just stuffing them carefully with clean cotton rags would hold them from collapsing further, since you would not be keeping them as functional vintage holsters, but for their historical value alone.

hansfischer007 · 07-24-2013, 07:57 PM

Hey Guys ....thanks for all the help.....I looked at all the pages and it seems that ....AIRSOFT GI has just about the Best prices.....they have an Artillery Luger that Im going to have to get.......(thats what i gave my son)......it would make for a nice display in my Library and i wont have to worry about leaving a "real luger" laying out........so Thanks again.........this just proves that The Luger Forum is THE BEST....Danke...Hans Fischer

07-24-2013, 11:22 AM	#22
lugerholsterrepair Moderator Lifetime Forum Patron Join Date: Jun 2002 Location: Arizona/Colorado Posts: 7,760 Thanks: 4,848 Thanked 3,099 Times in 1,426 Posts	Alx, An admirable job and if it suits your tastes so much the better. I keep about 50 wooden inserts here and occasionally place one in a clients holster as a courtesy if the pocket is squishy. While I am working a holster on my bench I almost always slip one in to keep from flexing the mag pouch un necessarily. Mag pouches vary so much you often see problems with the way it was originally made show up in split seams or out of shape notches, bent over tops etc. I have seen many a holster that would not take an original magazine. Tool pouches can be the same way. In the shop I probably see at least a half dozen Luger holsters a week. In putting wooden inserts in and out some fit, some don't and some fit better than others. The end pulls RARELY fit either front or back..they fit one way and you turn the mag around and it doesn't fit. They can be especially weird on double mag pouches. I think Dwight's idea is a good one..Depending of course on how much each copy on a 3-D printer is! __________________ Jerry Burney 11491 S. Guadalupe Drive Yuma AZ 85367-6182 lugerholsterrepair@earthlink.net 928 342-7583 (CO & AZ) Year Round 719 207-3331 (cell) "For those who Fight For It, Life has a flavor the protected will never know."

07-24-2013, 03:22 PM	#23
hansfischer007 User Join Date: Nov 2010 Location: Sunny Tennessee Posts: 233 Thanks: 509 Thanked 96 Times in 48 Posts	WE Lugers.?? What is the link to WE Lugers..?...I would be interested in getting a Navy or Artillery model for a display......many years ago I picked up one of the japanese metal artillery lugers.......looked good....and I put it in a display for my older son.......after his divorce....he couldnt find it anymore....and we think his ex gave it to one of her relatives or just dumped it.........anyway....Im interested in getting another similar one if possible.....this time for MY display.....any help is appreciated.....Thanks.....Hans Fischer

07-24-2013, 07:57 PM	#28
hansfischer007 User Join Date: Nov 2010 Location: Sunny Tennessee Posts: 233 Thanks: 509 Thanked 96 Times in 48 Posts	Replica Lugers...... Hey Guys ....thanks for all the help.....I looked at all the pages and it seems that ....AIRSOFT GI has just about the Best prices.....they have an Artillery Luger that Im going to have to get.......(thats what i gave my son)......it would make for a nice display in my Library and i wont have to worry about leaving a "real luger" laying out........so Thanks again.........this just proves that The Luger Forum is THE BEST....Danke...Hans Fischer

07-24-2013, 04:23 PM	#24
Alx User Join Date: Sep 2006 Location: Nashville, Tennessee area Posts: 263 Thanks: 5 Thanked 3 Times in 3 Posts	http://www.airsoftmegastore.com/1548...0390338tm.aspx The red tip might be screwed in, or just pressed on, 'seen them both ways. Either way, they will detatch and leave the gun looking very realistic. WE also makes grip panels of a better-looking brown plastic. http://www.airsplat.com/Items/GP-WE-LUGER-P08.htm http://www.shortyusa.com/airsoft.htm...&searchstring= http://www.airsoftgi.com/product_inf...oducts_id=3151 http://www.airsoftmegastore.com/4554...IUM-Model.aspx http://www.evike.com/product_info.php?products_id=3682 These are some sources for the WE popguns. There may be an airsoft gun dealer store in your area, that might have them on hand. Prob. less $ to buy them online.

07-24-2013, 04:41 PM	#25
Vlim Moderator Lifetime LugerForum Patron Join Date: Oct 2002 Location: Europe Posts: 5,032 Thanks: 1,018 Thanked 3,873 Times in 1,184 Posts	A problem with old leather is that many of the holsters have shrunk a little over time, so even when the magazine or gun substitute is of the right size, the holster may have problems fitting them. I have a couple of holsters here that cannot close correctly with a gun / magazine in place.

07-24-2013, 04:45 PM	#26
kzullick Lifer Lifetime Forum Patron Join Date: Aug 2012 Location: East Berwick, Pennsylvania Posts: 227 Thanks: 609 Thanked 100 Times in 81 Posts	What about the luger BB guns they make today? Will they work?

07-24-2013, 05:04 PM	#27
Alx User Join Date: Sep 2006 Location: Nashville, Tennessee area Posts: 263 Thanks: 5 Thanked 3 Times in 3 Posts	If you mean the plastic 6mm "BB"s then that is what the WE airsoft Lugers shoot. If there are any Luger copies that fire metal BBs, I don't know of them. As of holsters that have shrunk too far to close around the gun, maybe just stuffing them carefully with clean cotton rags would hold them from collapsing further, since you would not be keeping them as functional vintage holsters, but for their historical value alone.