I need help with a P08 slide stop problem - Page 2

Kiwi · 12-20-2020, 08:49 AM

Things to avoid

mrapaul · 12-22-2020, 03:12 PM

Update:
Man thanks to all the help from the members of the forum. I took my P08 to a friend who owns a machine shop, and after in-depth looking at the mess I got myself and the firearm into, it got fixed.
All is well, now I a going to try and see how I cocked this up so badly
Many thanks again, especially to Tom Heller, I really enjoyed talking with you sir.......

Doubs · 12-22-2020, 03:46 PM

All's well that ends well. Glad you were able to resolve your problem.

In future, just remember that once you lower the locking bolt (take down lever) and remove the side plate, you do not disassemble anything more until the entire upper is separated from the frame.

If you shoot it, let us know how it works.

mrapaul · 12-22-2020, 07:26 PM

Yes sir....I am pretty sure I had the magazine in place at some point when I pushed the upper forward...I think this caused the jam

I am grateful I got away with what could have been a catastrophe .....thanks again to all who helped

Lugerdoc · 12-22-2020, 07:47 PM

Happy to learn that you got it back together. TWH the lugerdoc

DonVoigt · 12-22-2020, 09:35 PM

Quote:

Originally Posted by mrapaul

Update:
Man thanks to all the help from the members of the forum. I took my P08 to a friend who owns a machine shop, and after in-depth looking at the mess I got myself and the firearm into, it got fixed.
All is well, now I a going to try and see how I cocked this up so badly
Many thanks again, especially to Tom Heller, I really enjoyed talking with you sir.......

That's good,
but how about a little info on "how" he did it!
"The world wonders".

mrapaul · 12-24-2020, 11:18 PM

On reviewing the mess I got myself into, I am pretty sure I had the magazine in, which pushed up the hold open latch, when then moved the receiver, it trapped the HOL.....things went from bad to worse. I tried to remove the breach block but it was trapped, and then the pin wouldn't align
We ended up driving the receiver forward with a piece of wood to soften the tapping.. we used a lot of penetrating oil before hand
The springs, and everything are OK. No damage.....greatly relieved and thankful for the help on this forum

The take away....make sure the magazine out before any movement is attempted.....

12-20-2020, 08:49 AM	#21
Kiwi User Join Date: Mar 2019 Location: Wrong side of the Delaware river Posts: 291 Thanks: 199 Thanked 413 Times in 162 Posts	Things to avoid Attached Thumbnails

12-22-2020, 07:47 PM	#25
Lugerdoc Patron LugerForum Patron Join Date: Jun 2002 Location: POB 398 St.Charles,MO. 63302 Posts: 5,089 Thanks: 6 Thanked 736 Times in 483 Posts	Happy to learn that you got it back together. TWH the lugerdoc __________________ Tom Heller POB 398 ST.Charles, MO. 63302 Tel 636-447-3006 lugerdoc@charter.net

12-22-2020, 03:12 PM	#22
mrapaul User Join Date: Dec 2020 Posts: 9 Thanks: 0 Thanked 1 Time in 1 Post	Update: Man thanks to all the help from the members of the forum. I took my P08 to a friend who owns a machine shop, and after in-depth looking at the mess I got myself and the firearm into, it got fixed. All is well, now I a going to try and see how I cocked this up so badly Many thanks again, especially to Tom Heller, I really enjoyed talking with you sir.......

12-22-2020, 03:46 PM	#23
Doubs User Join Date: Jun 2002 Location: Byron, Georgia Posts: 1,670 Thanks: 769 Thanked 1,611 Times in 525 Posts	All's well that ends well. Glad you were able to resolve your problem. In future, just remember that once you lower the locking bolt (take down lever) and remove the side plate, you do not disassemble anything more until the entire upper is separated from the frame. If you shoot it, let us know how it works.

12-22-2020, 07:26 PM	#24
mrapaul User Join Date: Dec 2020 Posts: 9 Thanks: 0 Thanked 1 Time in 1 Post	Yes sir....I am pretty sure I had the magazine in place at some point when I pushed the upper forward...I think this caused the jam I am grateful I got away with what could have been a catastrophe .....thanks again to all who helped

12-24-2020, 11:18 PM	#27
mrapaul User Join Date: Dec 2020 Posts: 9 Thanks: 0 Thanked 1 Time in 1 Post	On reviewing the mess I got myself into, I am pretty sure I had the magazine in, which pushed up the hold open latch, when then moved the receiver, it trapped the HOL.....things went from bad to worse. I tried to remove the breach block but it was trapped, and then the pin wouldn't align We ended up driving the receiver forward with a piece of wood to soften the tapping.. we used a lot of penetrating oil before hand The springs, and everything are OK. No damage.....greatly relieved and thankful for the help on this forum The take away....make sure the magazine out before any movement is attempted.....