Take down lever repair

apachedawg · 12-18-2019, 09:54 PM

I have a numbers matching Erfurt Luger and the disk has been missing from the take down lever since I got it. I have a replacement lever in it at this time and am wondering if there is anyone who could take the disk off of my replacement lever and weld it to my original one. Thanks in advance.

Edward Tinker · 12-19-2019, 12:39 AM

I had this done once, was $50, the 2nd time I wanted one fixed, he told me $100 - just to fix it.

I would imagine someone who is good at micro-welding can do it, but I am unsure who to recommend.

Ed

apachedawg · 12-19-2019, 06:19 PM

I don’t know of anyone around me that does anything like that.

Vlim · 12-19-2019, 06:29 PM

I think it would be easier to build up a new button with weld material and then reshape it, but either way it will be a challenge.

ithacaartist · 12-19-2019, 09:19 PM

One of the micro-welding guys might be able to help. The welding aspect would be straightforward and not take much time. It's the prep and cleanup that pile up the time/money. For you-- or someone local to you-- to create ready-to-weld pieces to submit, then work the surfaces down to what's required when it returns would be the least expensive way to take this route.
Any technician or facility with the skills to accomplish even these before and after tasks wouldn't surprise me if they charge at least $60.hr for their time, so DIY would be the way to go if you can handle it yourself.

gunbugs · 12-20-2019, 12:33 AM

There is a guy here in town who has done numerous tig welding jobs for me. Look up ACCU-TIG.com. His name is Dan. He can possibly help you out.

Lugerdoc · 12-20-2019, 12:13 PM

This was a flaw with the original luger that the Swiss corrected with their M29 and continued by Mauser with their 1970s Parabellum, by making the checkered circle solid (not hollow inside). To avoid this problem, always make sure that the pistol is "out of battery" (toggle in the held open position) before attempting to open the TD lever. or if stuck, only push down on the non-checkered part. TH

12-18-2019, 09:54 PM	#1
apachedawg User Join Date: Aug 2010 Location: Springfield, TN Posts: 8 Thanks: 1 Thanked 0 Times in 0 Posts	Take down lever repair I have a numbers matching Erfurt Luger and the disk has been missing from the take down lever since I got it. I have a replacement lever in it at this time and am wondering if there is anyone who could take the disk off of my replacement lever and weld it to my original one. Thanks in advance. __________________ Guns? Ya, I own a few.

12-19-2019, 06:19 PM	#3
apachedawg User Join Date: Aug 2010 Location: Springfield, TN Posts: 8 Thanks: 1 Thanked 0 Times in 0 Posts	I don’t know of anyone around me that does anything like that. __________________ Guns? Ya, I own a few.

12-19-2019, 09:19 PM	#5
ithacaartist Twice a Lifer Lifetime Forum Patron Join Date: Mar 2011 Location: Atop the highest hill in Schuyler County NY Posts: 3,282 Thanks: 7,007 Thanked 2,476 Times in 1,319 Posts	One of the micro-welding guys might be able to help. The welding aspect would be straightforward and not take much time. It's the prep and cleanup that pile up the time/money. For you-- or someone local to you-- to create ready-to-weld pieces to submit, then work the surfaces down to what's required when it returns would be the least expensive way to take this route. Any technician or facility with the skills to accomplish even these before and after tasks wouldn't surprise me if they charge at least $60.hr for their time, so DIY would be the way to go if you can handle it yourself. __________________ "... Liberty is the seed and soil, the air and light, the dew and rain of progress, love and joy."-- Robert Greene Ingersoll 1894

12-20-2019, 12:13 PM	#7
Lugerdoc Patron LugerForum Patron Join Date: Jun 2002 Location: POB 398 St.Charles,MO. 63302 Posts: 5,089 Thanks: 6 Thanked 736 Times in 483 Posts	This was a flaw with the original luger that the Swiss corrected with their M29 and continued by Mauser with their 1970s Parabellum, by making the checkered circle solid (not hollow inside). To avoid this problem, always make sure that the pistol is "out of battery" (toggle in the held open position) before attempting to open the TD lever. or if stuck, only push down on the non-checkered part. TH __________________ Tom Heller POB 398 ST.Charles, MO. 63302 Tel 636-447-3006 lugerdoc@charter.net

12-19-2019, 12:39 AM	#2
Edward Tinker Super Moderator Eternal Lifer LugerForum Patron Join Date: Jun 2002 Location: North of Spokane, WA Posts: 15,909 Thanks: 1,986 Thanked 4,500 Times in 2,076 Posts	I had this done once, was $50, the 2nd time I wanted one fixed, he told me $100 - just to fix it. I would imagine someone who is good at micro-welding can do it, but I am unsure who to recommend. Ed

12-19-2019, 06:29 PM	#4
Vlim Moderator Lifetime LugerForum Patron Join Date: Oct 2002 Location: Europe Posts: 5,032 Thanks: 1,018 Thanked 3,873 Times in 1,184 Posts	I think it would be easier to build up a new button with weld material and then reshape it, but either way it will be a challenge.

12-20-2019, 12:33 AM	#6
gunbugs Lifetime Forum Patron Join Date: Sep 2013 Location: Fairbanks, Alaska. Home of the best moose. Posts: 635 Thanks: 335 Thanked 1,139 Times in 377 Posts	There is a guy here in town who has done numerous tig welding jobs for me. Look up ACCU-TIG.com. His name is Dan. He can possibly help you out.