![]() |
my profile |
register |
faq |
search upload photo | donate | calendar |
![]() |
#1 |
User
Join Date: Jun 2002
Location: Portland, Oregon
Posts: 3,893
Thanks: 0
Thanked 1,287 Times in 426 Posts
|
![]()
A recent comment about reinforced Luger frames got me to thinking about a photo comparison I made awhile ago, and wondering if it related.
John Walter, in "The Luger Book" (1986, p.117, 217) and "Luger" (1977, p.209) asserts that Erfurt machined their P-08 frames with a steel reinforcement spur protruding into the recoil spring well under the spring guide, and that in 1915 DWM added this feature to their P-08 production as well. Walter illustrates the difference, seen here scanned from "Luger"--unreinforced to the left, reinforced to the right (his frame illustration in "The Luger Book" is hopeless, and doesn't even show this feature). ![]() Walter is in error in this regard. The illustration below shows the evolution of the Luger frame from the 1906 model through the 1914 model. It is clear to see that the "reinforcing" piece is actually present on the 1906 Luger frame, and is associated with the tab which holds the holds the grip safety and grip safety spring. The P-08, in this case a Commercial, retains the metal spur, although the grip safety tab is no longer present. By 1917 the metal spur is gone, and the recoil spring well is faced off with a straight cut. It is reasonable to assume that, at some time during Luger production, this metal spur was omitted in order to eliminate a machining step or two, with the added benefit of reducing the gun's weight by a couple of ounces. ![]() In the course of research a number of Imperial Military Lugers were examined to see if they exhibited this feature, and to determine, if possible, when the frame whas changed. Subject guns included: DWM 1908, four guns: two ns and two a suffix 1910: c suffix 1911, two guns: e suffix 1912, two guns: ns 1913: a suffix 1914: ns 1915, three guns: two c suffix, one d suffix 1916, three guns: two i suffix, one o suffix 1917, four guns: one b suffix, two LP08 g and k suffix, one Navy ns Safe/Loaded Commercial Alphabet Commercial, u suffix Erfurt 1911, two guns: ns 1912, two guns: ns 1913: ns 1914: a suffix 1917: h suffix 1917/18: s suffix The DWM guns through 1914 all had the spur in the recoil spring well. The 1915 guns and onward were all straight frame. The 1911 Erfurts had the spur, 1912 and onward were straight frame. Call For Data Jan Still (correspondence) has established that the change in DWM production occurred between Lugers 1914 serial# 468, and 1915 serial# 3220c. Erfurt production chanaged between Lugers 1911# 7638 and 1912 serial# 454. I am going to start another database, to try to refine the year and serial# of the changeover point. Anyone owning Lugers between those dates and numbers, please check your frames for the presence or absence of the recoil well spur. As always, post your information here, or email me dwightg@pacifier.com It would also be useful to know where this changeover occurred in Commercial production, as it would help establish a production date in corrrelation with the military data. Owners of P-08 Commercials, 1914 Commercials, and the Army and Navy variations of those models, after serial# 46161, please report your guns' characteristics in this regard as well. This has been an interesting discovery, and I thank everybody in advance for their information. --Dwight |
![]() |
The following member says Thank You to Dwight Gruber for your post: |
![]() |
#2 |
Lifer 2X
Lifetime Forum Patron Join Date: May 2005
Location: Somewhere in Montana
Posts: 2,624
Thanks: 3,164
Thanked 2,539 Times in 948 Posts
|
![]()
Dwight, 1914 Commercial 72353, straight cut. 1914 1839 spur.
__________________
Bill Lyon |
![]() |
![]() |
#3 |
User
Join Date: Jun 2002
Location: Portland, Oregon
Posts: 3,893
Thanks: 0
Thanked 1,287 Times in 426 Posts
|
![]()
Quick-draw Bill,
Thanks much. --Dwight |
![]() |
![]() |
#4 |
Moderator
Lifetime LugerForum Patron Join Date: Oct 2002
Location: Europe
Posts: 5,053
Thanks: 1,036
Thanked 3,987 Times in 1,205 Posts
|
![]()
Dwight:
1913, Dutch contract #2850 has the old style, as expected. |
![]() |
![]() |
#5 |
FIREARM HISTORIAN AND AUT
Join Date: Jun 2002
Location: Belgium
Posts: 1,535
Thanks: 106
Thanked 349 Times in 129 Posts
|
![]()
Hello Gents,
Please find hereafter an interesting photo discussed at page 43 of my book: "The Luger Artillery". As already highlighted the grip of P08 was standardized starting from August 1913 including a stock lug. The internal area of the grips towards the bottom of the recoil spring changed. From right to left: a P08 made before 1913; a transitional model with the stock lug and internal working unchanged ; the final frame configuration. Should be interesting to add to your research also the transitional model to figure out the serial number range where this model falls. ![]() Mauro ![]()
__________________
Mauro Baudino - www.lugerlp08.com www.paul-mauser-archive.com Mauser Company and Firearm Historian - Mauser Parabellum Certification Service. |
![]() |
![]() |
#6 |
User
Join Date: Jun 2002
Location: Greenville SC
Posts: 1,004
Thanks: 377
Thanked 410 Times in 180 Posts
|
![]()
Dwight, 1915 DWM; 8413b straight frame
|
![]() |
![]() |
#7 |
User
Join Date: Jun 2002
Location: Beaverton, Oregon
Posts: 487
Thanks: 0
Thanked 0 Times in 0 Posts
|
![]()
My 1906 commercial #31883 matches your 1906 Dutch.
Steve |
![]() |
![]() |
#8 |
User
Join Date: Feb 2004
Location: Orygun
Posts: 4,243
Thanks: 118
Thanked 245 Times in 150 Posts
|
![]()
Dwight,
1911 Erfurt # 8699 Straight.
__________________
I Still Need DWM side plate #49... if anyone runs across a nice one. What ~Rudyard Kipling~ said... |
![]() |
![]() |
#9 |
User
Join Date: Jun 2002
Location: Portland, Oregon
Posts: 3,893
Thanks: 0
Thanked 1,287 Times in 426 Posts
|
![]()
Ron,
Verrry interesting, thanks much. Gerben and Steve, Thanks for the numbers. Note, that for this transition I'm looking for 1908 and 1914 Commercials and their Commercial Navy and Commercial Military variations. Mauro, This is an interesting twist. Can you tell me, what is the year and serial# of the center "transitional" Luger? --Dwight |
![]() |
![]() |
#10 |
User
Join Date: Jun 2002
Location: Box 240188, Douglas, Alaska, 99824
Posts: 463
Thanks: 0
Thanked 52 Times in 32 Posts
|
![]()
Dwight
I have these 1908/1914 DWM Comm to add. 69911, 1908 DWM Commercial Army, spur 70149, 1908 DWM Commercial Army, spur 74200, 1914 DWM Commercial RG, straight 74596, 1914 DWM Commercial RG, straight Jan |
![]() |
![]() |
#11 |
User
Join Date: Jun 2002
Location: Portland, Oregon
Posts: 3,893
Thanks: 0
Thanked 1,287 Times in 426 Posts
|
![]()
Jan,
Excellent, thanks very much for those numbers. So, to date, we have the spur to straight recoil spring well changeover at: Erfurt, 1911 between # 7638--8699 DWM Military between 1914 #1839 and 1915 #8413b DWM Commercial between 70149 and 72353. Can anybody provide observations within those ranges to fine-tune them even more? Continued thanks for the info. --Dwight |
![]() |
![]() |
#12 |
User
Join Date: Jun 2002
Location: Box 240188, Douglas, Alaska, 99824
Posts: 463
Thanks: 0
Thanked 52 Times in 32 Posts
|
![]()
Dwight
Excellent. You have one Commercial at 72353 straight cut. So DWM Commercial between 70149 and 72353. Jan |
![]() |
![]() |
#13 |
Moderator
2010 LugerForum Patron Join Date: Jun 2002
Location: Santa Teresa New Mexico just outside of the West Texas town of El Paso
Posts: 7,003
Thanks: 1,086
Thanked 5,133 Times in 1,687 Posts
|
![]()
Let's narrow the gap some more. DWM Commercial 71247 with spur (also has a grip safety).
__________________
If it's made after 1918...it's a reproduction |
![]() |
![]() |
#14 |
Super Moderator
Eternal Lifer LugerForum Patron Join Date: Jun 2002
Location: North of Spokane, WA
Posts: 15,924
Thanks: 2,012
Thanked 4,517 Times in 2,087 Posts
|
![]()
Dwight;
all have the spur; 1911 Erfurt 2155 1911 Erfurt 7686 1912 DWM 1064 Ed |
![]() |
![]() |
#15 |
User
Join Date: Jun 2002
Location: Portland, Oregon
Posts: 3,893
Thanks: 0
Thanked 1,287 Times in 426 Posts
|
![]()
Jan,
Oops, you're right, correction made in post. Ed, Thanks for the additional numbers. Interesting that the Erfurt statistic is narrowed down to within 1,100 guns. Ron, The spur is going to be a part of any grip-safety frame, an integral part of the grip safety/spring mounting tab. --Dwight |
![]() |
![]() |
#16 |
User
Join Date: Dec 2002
Location: D/FW, Tx
Posts: 279
Thanks: 109
Thanked 31 Times in 16 Posts
|
![]()
Hi Dwight,
* Doesn't Heinz's post above narrow the DWM Military range between 1914 #1839 and 1915 #8413b?? Respectfully, Bob |
![]() |
![]() |
#17 |
Moderator
2010 LugerForum Patron Join Date: Jun 2002
Location: Santa Teresa New Mexico just outside of the West Texas town of El Paso
Posts: 7,003
Thanks: 1,086
Thanked 5,133 Times in 1,687 Posts
|
![]()
Dwight,
I know that, that's why I added the "(also has a grip safety)". Call it illuminating the obvious. ![]()
__________________
If it's made after 1918...it's a reproduction |
![]() |
![]() |
#18 |
User
Join Date: Jun 2002
Location: Portland, Oregon
Posts: 3,893
Thanks: 0
Thanked 1,287 Times in 426 Posts
|
![]()
Bob,
You are right, of course. I'll have to do a better job of updating the post. Ron, One of the things I hope this survey illuminates is DWM's production flow. For instance, were there separate production lines maintained for P-08 (and 1914) military production and the corresponding Commercial production? Were there simultaneous Military production lines? Were Military and Commercial weapons interspersed, either individually or in groups? Are commercially numbered and proofed Lugers originally Military production which did not meet specification? (am I reinventing the wheel here and all this is documented somewhere?) It strikes me that this kind of a production detail can provide a useful clue. It is interesting to note that I have recorded no 1906-frame Commercial guns after #69111, except for your #71247 and a 1906 AE #93595(!). It is true, however, that DWM serviced Dutch contracts into 1914 (1906 frames), and provided Dutch parts to Vickers in 1921. Kenyon illustrates other sporadic grip-safety production into the Mauser era. Was a separate production line, or at least separate frame tooling, maintained for these purposes? Or did DWM perhaps have a several-thousand piece stockpile of these frames on hand? (unlikely, it would seem...) --Dwight |
![]() |
![]() |
#19 |
User
Join Date: Jun 2002
Location: Portland, Oregon
Posts: 3,893
Thanks: 0
Thanked 1,287 Times in 426 Posts
|
![]()
After several entries from another Forum, here is where the changeovers now stand:
DWM 1914 3500a spur DWM 1915 3220c straight Erfurt 1911 7686 spur Erfurt 1911 8221 straight 1914 Commercial Army 70362 spur 1914 Commercial 72353 straight It is interesting to note that all the DWM 1914 LP-08 reported, three between 669 and 1612, all have straight frames. There are more, but I am waiting to get a couple of details on them. I appreciate the numbers from everybody, and am looking forward to more. Please examine and report Lugers around these ranges, not just within them; it is a reasonable expectation that there might be an overlap in the change. --Dwight |
![]() |
![]() |
#20 |
User
Join Date: Jun 2002
Location: Portland, Oregon
Posts: 3,893
Thanks: 0
Thanked 1,287 Times in 426 Posts
|
![]()
Just an update from a few more samples, in the hopes that it may drag some other guns out of the woodwork. Here is where the changeovers now stand:
DWM 1914 3500a spur DWM 1915 3220c straight Erfurt 1911 7686 spur Erfurt 1911 8221 straight 1914 Commercial Army 70362 spur 1914 Commercial 72353 straight There are seven 1914 LP-08 reported between 262(ns) and 7754(ns). None of them have spur frames. WAG question I wonder if this implies that DWM set up a new production "line" for LP-08 frames, or entire guns? As before, I appreciate the numbers from everybody, and am looking forward to more. Please examine and report Lugers around these ranges, not just within them; it is a reasonable expectation that there might be an overlap in the change. --Dwight |
![]() |
|
|