New Old Stock

Edward Tinker · 09-19-2020, 06:39 PM

Okay, This is my 9mm Navy Carbine - essentially a 1920 carbine that was put together and fixed by Don, GT and Jimmy Solomon - I had picked up a stock that had an original, marked stock attaching lug, but someone had used a stock that they had, and it was curved like a Winchester or the like.
Folks seemed to feel that it was 'not original' enough looking to fulfill the requirement by the BATF. Personally I thought it did - but then Jim offered me an original stock, that he had refinished and re-checkered it.

Don also MADE the forestock for me, using an original as an example and Jim checkered.

I know I need to redo the grip stocks, or put some on that are lighter (i had cleaned them up and added BLO before I got the stocks).

Vlim · 09-19-2020, 08:03 PM

Nice! But I would stain the stocks to match the color ofvthe grips.

sheepherder · 09-19-2020, 08:13 PM

Quote:

Originally Posted by Edward Tinker

Okay, This is my 9mm Navy Carbine...

Uh...What???

Quote:

...but someone had used a stock that they had, and it was curved like a Winchester or the like.
Folks seemed to feel that it was 'not original' enough looking...

Folks are right. The new buttstock not only looks much better but allows you to sight down the barrel, not have to scrunch your head over on its side.

I don't see a wedge. How'd you/Jim/Don/Gerry fasten the forearm to the frame extension???

Edward Tinker · 09-19-2020, 08:34 PM

Quote:

Originally Posted by sheepherder

Uh...What???

Folks are right. The new buttstock not only looks much better but allows you to sight down the barrel, not have to scrunch your head over on its side.

I don't see a wedge. How'd you/Jim/Don/Gerry fasten the forearm to the frame extension???

It’s a 1920 carbine that I put a navy sight on it

sheepherder · 09-19-2020, 10:48 PM

Quote:

Originally Posted by Edward Tinker

It’s a 1920 carbine that I put a navy sight on it

Ah. I didn't notice the rear sight. I had visions of German sailors going ashore on a tropical island and hunting wild boars...

DonVoigt · 09-20-2020, 09:21 AM

Quote:

Originally Posted by sheepherder

Uh...What???

Folks are right. The new buttstock not only looks much better but allows you to sight down the barrel, not have to scrunch your head over on its side.

I don't see a wedge. How'd you/Jim/Don/Gerry fasten the forearm to the frame extension???

With a screw from the bottom!

Heinz · 09-20-2020, 10:21 AM

Nice! A great project hat turned out well.

Doubs · 09-20-2020, 11:39 AM

Quote:

Originally Posted by Edward Tinker

but someone had used a stock that they had, and it was curved like a Winchester or the like.

Normally called a "crescent" butt stock.

Take my word for it, if it isn't tucked into the shoulder properly, it will punish the shooter. I have Winchester Hi-Walls in .38-55 and .45-70 with crescent butt stocks and they will let you know if it's shouldered wrong.

Your second stock looks great and that should be a fun Luger to shoot.

rhuff · 09-20-2020, 03:52 PM

I disagree with Vlim, I would lighten/exchange the grip stocks to match the stock and forearm. I really like that look......big improvement!!

Edward Tinker · 09-20-2020, 03:55 PM

Quote:

Originally Posted by rhuff

I disagree with Vlim, I would lighten/exchange the grip stocks to match the stock and forearm. I really like that look......big improvement!!

Yes, me two

martin08 · 09-20-2020, 05:44 PM

Are you pleased with the drop angle, Ed. Looks like it is rotated to create a fairly significant drop.

sheepherder · 09-21-2020, 04:43 PM

Quote:

Originally Posted by DonVoigt

With a screw from the bottom!

I believe that was a fairly common repair for broken-off wedge slots...Sometimes with a brass escutcheon inlaid into the forearm...

09-19-2020, 06:39 PM	#1
Edward Tinker Super Moderator Eternal Lifer LugerForum Patron Join Date: Jun 2002 Location: North of Spokane, WA Posts: 15,909 Thanks: 1,986 Thanked 4,500 Times in 2,076 Posts	New Old Stock Okay, This is my 9mm Navy Carbine - essentially a 1920 carbine that was put together and fixed by Don, GT and Jimmy Solomon - I had picked up a stock that had an original, marked stock attaching lug, but someone had used a stock that they had, and it was curved like a Winchester or the like. Folks seemed to feel that it was 'not original' enough looking to fulfill the requirement by the BATF. Personally I thought it did - but then Jim offered me an original stock, that he had refinished and re-checkered it. Don also MADE the forestock for me, using an original as an example and Jim checkered. I know I need to redo the grip stocks, or put some on that are lighter (i had cleaned them up and added BLO before I got the stocks). Attached Thumbnails __________________ Edward Tinker ************ Co-Author of Police Lugers - Co-Author of Simson Lugers Author of Veteran Bring Backs Vol I, Vol II, Vol III and Vol IV

09-20-2020, 03:52 PM	#9
rhuff Patron LugerForum Patron Join Date: Mar 2011 Location: Az. Posts: 2,270 Thanks: 2,686 Thanked 958 Times in 704 Posts	I disagree with Vlim, I would lighten/exchange the grip stocks to match the stock and forearm. I really like that look......big improvement!! __________________ Need DWM breechblock #21

09-19-2020, 08:03 PM	#2
Vlim Moderator Lifetime LugerForum Patron Join Date: Oct 2002 Location: Europe Posts: 5,032 Thanks: 1,018 Thanked 3,873 Times in 1,184 Posts	Nice! But I would stain the stocks to match the color ofvthe grips.

09-20-2020, 10:21 AM	#7
Heinz User Join Date: Jun 2002 Location: Greenville SC Posts: 1,004 Thanks: 377 Thanked 410 Times in 180 Posts	Nice! A great project hat turned out well.

09-20-2020, 05:44 PM	#11
martin08 New User Join Date: Sep 2020 Posts: 4 Thanks: 0 Thanked 6 Times in 2 Posts	Are you pleased with the drop angle, Ed. Looks like it is rotated to create a fairly significant drop.