LugerForum Discussion Forums my profile | register | faq | search
upload photo | donate | calendar

Go Back   LugerForum Discussion Forums > Luger Discussion Forums > Early Lugers (1900-1906)

Reply
Thread Tools Display Modes
Unread 09-07-2017, 02:06 PM   #1
Ron Wood
Moderator
2010 LugerForum
Patron
 
Ron Wood's Avatar
 
Join Date: Jun 2002
Location: Santa Teresa New Mexico just outside of the West Texas town of El Paso
Posts: 6,985
Thanks: 1,059
Thanked 5,082 Times in 1,673 Posts
Default Something new to ponder

One of the distinguishing features of the Old Model (1900) Luger is the square cornered side plate that is flush with the frame on the right hand edge. Just recently Tim Hawkens acquired a 1900 Commercial in the 15XXX serial number range. In looking at the photos it appeared that the side plate stands just a bit proud of the frame rather than flush. I called Tim and he verified that this is indeed the case.

I had also just recently taken note of my ’02 Carbine when Jerry Burney was in search of a proper side plate for the Carbine he is resurrecting, and observed that the side plate on it also is proud of the frame. This prompted me to look further at my ’02 Fat Barrel, Cartridge Counter and ’03 French Transitional. Lo and behold, they also have the proud side plate.

So now, this begs the question…when did the change in the Old Model side plate take place. From this very cursory initial investigation I am guessing that was in the late 1902-early 1903 time frame. Tim’s gun sets a starting point at the 15XXX serial number range. It would be interesting for those of you that have Old Model Lugers to check their side plates…we might be able to narrow down the serial number range when this small change took place.

By the way, before you ask, I have no idea why the change was made.
Ron
__________________
If it's made after 1918...it's a reproduction
Ron Wood is online now   Reply With Quote
The following 3 members says Thank You to Ron Wood for your post:
Unread 09-07-2017, 03:39 PM   #2
mrerick
Super Moderator - Patron
LugerForum
Life Patron
 
mrerick's Avatar
 
Join Date: Dec 2009
Location: Eastern North Carolina, USA
Posts: 3,900
Thanks: 1,370
Thanked 3,094 Times in 1,503 Posts
Default

Ron, This is Swiss 2813. It is fitted proud to the frame on the right edge and in the trigger guard area. Red arrows indicate.

Thiis makes me wonder if the standard plate always left enough metal to be proud of the frame, but the process of fitting it milled some down farther than others?
Attached Thumbnails
Click image for larger version

Name:	Swiss8213PlateProudS.jpg
Views:	109
Size:	56.2 KB
ID:	68435  

__________________
Igitur si vis pacem, para bellum -
- Therefore if you want peace, prepare for war.
mrerick is offline   Reply With Quote
The following member says Thank You to mrerick for your post:
Unread 09-07-2017, 04:15 PM   #3
ithacaartist
Twice a Lifer
Lifetime Forum
Patron
 
ithacaartist's Avatar
 
Join Date: Mar 2011
Location: Atop the highest hill in Schuyler County NY
Posts: 3,276
Thanks: 6,952
Thanked 2,461 Times in 1,315 Posts
Default

The side plate of my 1900 commercial s.n. 3402 is flush. It is probably too early for your purposes in this matter.
__________________
"... Liberty is the seed and soil, the air and light, the dew and rain of progress, love and joy."-- Robert Greene Ingersoll 1894
ithacaartist is offline   Reply With Quote
Unread 09-07-2017, 08:11 PM   #4
Karl
Lifer - Twice Over
Lifetime Forum
Patron
 
Karl's Avatar
 
Join Date: Jun 2002
Location: Savannah
Posts: 512
Thanks: 0
Thanked 237 Times in 109 Posts
Default

Great observation Ron,

M1900 AE 8748 flush side plate.

KFS
Karl is online now   Reply With Quote
Unread 09-07-2017, 08:48 PM   #5
Lyn Islaub
Lifer
Lifetime Forum
Patron
 
Join Date: Jun 2002
Location: Phoenix, AZ
Posts: 435
Thanks: 3
Thanked 152 Times in 72 Posts
Default

18660 is like Tim's in that the fit of the right side of the side plate is a bit proud.
Lyn Islaub is offline   Reply With Quote
Unread 09-08-2017, 12:16 PM   #6
Ron Wood
Moderator
2010 LugerForum
Patron
 
Ron Wood's Avatar
 
Join Date: Jun 2002
Location: Santa Teresa New Mexico just outside of the West Texas town of El Paso
Posts: 6,985
Thanks: 1,059
Thanked 5,082 Times in 1,673 Posts
Default

Quote:
Originally Posted by ithacaartist View Post
The side plate of my 1900 commercial s.n. 3402 is flush. It is probably too early for your purposes in this matter.
Dave,
Yes, it is a bit early. I have a 1900 Commercial that probably was made the same day (or close to it) as yours, #3453!
Ron
__________________
If it's made after 1918...it's a reproduction
Ron Wood is online now   Reply With Quote
The following member says Thank You to Ron Wood for your post:
Unread 09-08-2017, 07:36 PM   #7
mrerick
Super Moderator - Patron
LugerForum
Life Patron
 
mrerick's Avatar
 
Join Date: Dec 2009
Location: Eastern North Carolina, USA
Posts: 3,900
Thanks: 1,370
Thanked 3,094 Times in 1,503 Posts
Default

This is another DWM made Swiss, M1900/06 sn 11816 made in 1909. The plate is clearly proud of the frame in this picture.
Attached Thumbnails
Click image for larger version

Name:	1900-06_1909_ProudPlate.jpg
Views:	112
Size:	59.1 KB
ID:	68458  

__________________
Igitur si vis pacem, para bellum -
- Therefore if you want peace, prepare for war.
mrerick is offline   Reply With Quote
The following member says Thank You to mrerick for your post:
Unread 09-08-2017, 09:39 PM   #8
Ron Wood
Moderator
2010 LugerForum
Patron
 
Ron Wood's Avatar
 
Join Date: Jun 2002
Location: Santa Teresa New Mexico just outside of the West Texas town of El Paso
Posts: 6,985
Thanks: 1,059
Thanked 5,082 Times in 1,673 Posts
Default

Excellent! Thank you.
Ron
__________________
If it's made after 1918...it's a reproduction
Ron Wood is online now   Reply With Quote
Unread 09-09-2017, 10:27 AM   #9
JTD
User
 
Join Date: Feb 2005
Location: PA
Posts: 424
Thanks: 214
Thanked 407 Times in 148 Posts
Default

Ron, 1900 AE #10052 flush side plate. John
JTD is offline   Reply With Quote
Unread 09-09-2017, 10:46 AM   #10
hayhugh
User
 
hayhugh's Avatar
 
Join Date: Oct 2013
Location: Florida/Penna
Posts: 882
Thanks: 840
Thanked 507 Times in 270 Posts
Default

DWM commercial - 4512 flush
DWM Swiss military - 1264 flush

Last edited by hayhugh; 09-09-2017 at 10:58 AM. Reason: More info
hayhugh is offline   Reply With Quote
Unread 09-09-2017, 02:11 PM   #11
Ron Wood
Moderator
2010 LugerForum
Patron
 
Ron Wood's Avatar
 
Join Date: Jun 2002
Location: Santa Teresa New Mexico just outside of the West Texas town of El Paso
Posts: 6,985
Thanks: 1,059
Thanked 5,082 Times in 1,673 Posts
Default

Concerning this side plate study, I did not realize that I was plowing ground that had already been worked. As mentioned in this topic on Jan Still's forum and then confirmed by Charles Whittaker via Jerry Burney (Charles is a "lurker" on the Jan Still forum and a super source of information ) this difference in side plates is already quite well covered in Görtz & Sturgess "The Borchardt & Luger Automatic Pistols". According to that source, the change occurred around commercial serial number 10050 and Swiss second military contract (serial number 2001 and above). That pretty firmly locks in the transition to ~1903. End of pondering...thanks to all that participated.

Significant note:
John, your AE #10052 falls right at the range in G&S and pushes the transition a bit higher than their 10050! Thank you!
Ron
__________________
If it's made after 1918...it's a reproduction
Ron Wood is online now   Reply With Quote
The following member says Thank You to Ron Wood for your post:
Unread 09-10-2017, 09:26 AM   #12
Sergio Natali
User
 
Sergio Natali's Avatar
 
Join Date: Feb 2013
Location: Somewhere in Northern Italy
Posts: 2,646
Thanks: 1,082
Thanked 1,783 Times in 1,007 Posts
Default

Ron

The side plate of my Swiss DWM 1900 commercial s/n 763 is absolutely flush.
__________________
"Originality can't be restored and should be at the top of any collector's priority list.
Sergio Natali is offline   Reply With Quote
Unread 09-10-2017, 11:45 AM   #13
Ron Wood
Moderator
2010 LugerForum
Patron
 
Ron Wood's Avatar
 
Join Date: Jun 2002
Location: Santa Teresa New Mexico just outside of the West Texas town of El Paso
Posts: 6,985
Thanks: 1,059
Thanked 5,082 Times in 1,673 Posts
Default

Sergio.
Congratulations on owning such an early specimen! Does your Swiss still have an unrelieved frame and flat button magazine?
Ron
__________________
If it's made after 1918...it's a reproduction
Ron Wood is online now   Reply With Quote
Unread 09-10-2017, 04:08 PM   #14
Sergio Natali
User
 
Sergio Natali's Avatar
 
Join Date: Feb 2013
Location: Somewhere in Northern Italy
Posts: 2,646
Thanks: 1,082
Thanked 1,783 Times in 1,007 Posts
Default

Absolutely, early production Model 1900 Swiss Luger chambered in 7.65mm Luger, its chamber is stamped with Swiss "Cross in Sunburst" crest, unrelieved frame and low button magazine.
Attached Thumbnails
Click image for larger version

Name:	_SER8950.jpg
Views:	105
Size:	96.7 KB
ID:	68485  

__________________
"Originality can't be restored and should be at the top of any collector's priority list.
Sergio Natali is offline   Reply With Quote
The following member says Thank You to Sergio Natali for your post:
Unread 09-10-2017, 05:19 PM   #15
Ron Wood
Moderator
2010 LugerForum
Patron
 
Ron Wood's Avatar
 
Join Date: Jun 2002
Location: Santa Teresa New Mexico just outside of the West Texas town of El Paso
Posts: 6,985
Thanks: 1,059
Thanked 5,082 Times in 1,673 Posts
Default

Wonderful example!
Ron
__________________
If it's made after 1918...it's a reproduction
Ron Wood is online now   Reply With Quote
Unread 09-10-2017, 06:34 PM   #16
cirelaw
Lifer
Lifetime Forum
Patron
 
Join Date: Dec 2003
Location: PORT ST LUCIE, FLORIDA
Posts: 12,216
Thanks: 6,209
Thanked 4,133 Times in 2,173 Posts
Default

Sergio VERY COOL!
cirelaw is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 05:58 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright © 1998 - 2023, Lugerforum.com