LugerForum Discussion Forums my profile | register | faq | search
upload photo | donate | calendar

Go Back   LugerForum Discussion Forums > General Discussion Forums > Shooting and Reloading

Reply
Thread Tools Display Modes
Unread 02-25-2023, 01:18 PM   #1
1776skulker
New User
 
Join Date: Feb 2023
Posts: 2
Thanks: 0
Thanked 0 Times in 0 Posts
Default cartridge OK to use?

I have a match 1916 commercial 30 Luger. My neighbor just picked up two fifty-round boxes of reloads for me ($40) but there are two kinds there.

Over half are the usual copper fmj but there are some with lead projectiles. These are about two mm longer than the fmj rounds and I am wondering if they will work in my pistol.

They seem to fit OK in the magazine but they are primed and I am not thrilled about manually cycling some through the gun.

Nor do I have any idea how much powder is in the cartridge.

I don't have plans to shoot my pistol but I would like to know any thoughts folks might have. Thanks.
Attached Thumbnails
Click image for larger version

Name:	20230225_121035.jpg
Views:	43
Size:	53.2 KB
ID:	86488  

1776skulker is offline   Reply With Quote
Unread 02-25-2023, 02:02 PM   #2
Mac Cat
Lifer
Lifetime Forum
Patron
 
Mac Cat's Avatar
 
Join Date: Apr 2015
Location: Austin, Texas
Posts: 665
Thanks: 1,994
Thanked 538 Times in 291 Posts
Default

I would be very wary of unknown ammo.
There is a lot of hand-loaded ammo going around, cheap, and it could be bad stuff.
Over loaded or underloaded are both problematic.
I also only shoot FMJ - no lead bullets.

You can hand cycle a few rounds to see how they feed, but my guess is that one on the right is not going to eject easily - the case looks all wrong.

Can we see the printing on the back of the case, too ?

I show the overall length 29.4 mm for my 9mm and 7.65mm.
Attached Thumbnails
Click image for larger version

Name:	20 cal butt end.jpg
Views:	46
Size:	146.3 KB
ID:	86492  

Click image for larger version

Name:	30 cal luger round.jpg
Views:	55
Size:	197.0 KB
ID:	86493  

Mac Cat is offline   Reply With Quote
The following member says Thank You to Mac Cat for your post:
Unread 02-25-2023, 02:44 PM   #3
jeb111
Patron
LugerForum
Patron
 
Join Date: May 2018
Location: wyoming
Posts: 275
Thanks: 676
Thanked 321 Times in 131 Posts
Default

Not worth chancing damage to you or your Luger. I wouldn't shoot reloads from an unknown source. I think you should pass.
Jim
jeb111 is offline   Reply With Quote
The following 4 members says Thank You to jeb111 for your post:
Unread 02-25-2023, 04:48 PM   #4
wlyon
Lifer 2X
Lifetime Forum
Patron
 
wlyon's Avatar
 
Join Date: May 2005
Location: Somewhere in Montana
Posts: 2,614
Thanks: 3,134
Thanked 2,516 Times in 939 Posts
Default

If they are cheap enough pull the bullets .
,dump the powder and save the brass. Do not shoot anyones handloads except your own. Bill
__________________
Bill Lyon
wlyon is offline   Reply With Quote
The following 7 members says Thank You to wlyon for your post:
Unread 02-25-2023, 04:58 PM   #5
gunbugs
Lifetime Forum
Patron
 
gunbugs's Avatar
 
Join Date: Sep 2013
Location: Fairbanks, Alaska. Home of the best moose.
Posts: 626
Thanks: 332
Thanked 1,106 Times in 370 Posts
Default

1. NEVER shoot someone else's reloads through your gun.
2. NEVER shoot your reloads through someone else's gun.

It doesn't matter if "he's been reloading for years".
I work on guns pretty regularly that are damaged from " My buddy gave me some of his reloads to shoot, and now my gun doesn't work".

You have NO IDEA how much of what kind of powder is in those cartridges, unless you loaded them yourself.
Unknown handloads are a recipe for disaster.

The only safe road for that ammo is to pull it down and start over. If you have the time and want to make the effort.

https://forum.lugerforum.com/attachm...1&d=1677358609
Attached Thumbnails
Click image for larger version

Name:	IMG_6208.jpg
Views:	70
Size:	202.5 KB
ID:	86495  

gunbugs is offline   Reply With Quote
The following 5 members says Thank You to gunbugs for your post:
Unread 02-25-2023, 06:03 PM   #6
1776skulker
New User
 
Join Date: Feb 2023
Posts: 2
Thanks: 0
Thanked 0 Times in 0 Posts
Default

Thanks for the replies--they echo my own thoughts. I appreciate the concern.

The brass with the lead in 'em are Western Cartridge Co. 71s. The others are Peters 30 Luger.

A friend of my neighbor did the reloads so it wouldn't be a problem to find what charges he put in there. I wanted to find an answer to the length situation first. But, even if OK, I have no plans to fire this pistol.
1776skulker is offline   Reply With Quote
Unread 02-25-2023, 10:35 PM   #7
gunbugs
Lifetime Forum
Patron
 
gunbugs's Avatar
 
Join Date: Sep 2013
Location: Fairbanks, Alaska. Home of the best moose.
Posts: 626
Thanks: 332
Thanked 1,106 Times in 370 Posts
Default

Pull them apart or throw them away. A disaster waiting to happen.
Unless you loaded them yourself, they are suspect, and not worth risking.
It does not matter if your neighbors friend can tell you "what load he used".
Unless you watched him load them, you will never know for sure.
DO NOT shoot other people's reloads. It is not worth it.
gunbugs is offline   Reply With Quote
The following 2 members says Thank You to gunbugs for your post:
Unread 02-26-2023, 01:12 PM   #8
Kiwi
User
 
Kiwi's Avatar
 
Join Date: Mar 2019
Location: Wrong side of the Delaware river
Posts: 279
Thanks: 184
Thanked 394 Times in 154 Posts
Default

Agree with "do not use" but out of curiosity would weigh the projectiles to see the variance between the lead and Jacketed, and the powder charge for each.

The powder can be used as plant fertilizer.
The primed case and projectile can be reused when you have a powder and load formula.
Kiwi is offline   Reply With Quote
Unread 02-26-2023, 02:19 PM   #9
Edward Tinker
Super Moderator
Eternal Lifer
LugerForum
Patron
 
Edward Tinker's Avatar
 
Join Date: Jun 2002
Location: North of Spokane, WA
Posts: 15,902
Thanks: 1,981
Thanked 4,487 Times in 2,071 Posts
Default

I didn't see anyone say anything, but the cannualre (bottom part) and where the shape of the cartridges is different.
__________________
Edward Tinker
************
Co-Author of Police Lugers - Co-Author of Simson Lugers
Author of Veteran Bring Backs Vol I, Vol II, Vol III and Vol IV

Edward Tinker is offline   Reply With Quote
The following member says Thank You to Edward Tinker for your post:
Unread 02-26-2023, 03:54 PM   #10
rhuff
Patron
LugerForum
Patron
 
rhuff's Avatar
 
Join Date: Mar 2011
Location: Az.
Posts: 2,269
Thanks: 2,678
Thanked 956 Times in 702 Posts
Default

I agree with the info above......I only shoot my reloads in my guns. If you are a reloader, you can salvage the brass and projectiles(if they measure out to be correct). Dump the powder and start over.

I have loaded many Ks of 30 Luger brass, and it can be tricky at times, and neck tension is paramount!!
__________________
Need DWM breechblock #21
rhuff is offline   Reply With Quote
The following member says Thank You to rhuff for your post:
Unread 02-26-2023, 04:34 PM   #11
Mac Cat
Lifer
Lifetime Forum
Patron
 
Mac Cat's Avatar
 
Join Date: Apr 2015
Location: Austin, Texas
Posts: 665
Thanks: 1,994
Thanked 538 Times in 291 Posts
Default

Ed said:
Quote:
. . . the cannualre (bottom part) and where the shape of the cartridges is different.
I agree - the one on right doesn't look like a 7.65 luger at all.

1776skuler said:
Quote:
The brass with the lead in 'em are Western Cartridge Co. 71s. The others are Peters 30 Luger.
I haven't heard of that one, but it's good know.
Mac Cat is offline   Reply With Quote
The following member says Thank You to Mac Cat for your post:
Unread 02-27-2023, 05:57 AM   #12
ithacaartist
Twice a Lifer
Lifetime Forum
Patron
 
ithacaartist's Avatar
 
Join Date: Mar 2011
Location: Atop the highest hill in Schuyler County NY
Posts: 3,276
Thanks: 6,952
Thanked 2,461 Times in 1,315 Posts
Default

Quote:
Originally Posted by Edward Tinker View Post
I didn't see anyone say anything, but the cannualre (bottom part) and where the shape of the cartridges is different.
Yes, the round on the right is rimmed. The shoulder is different shape, and the OAL is just nuts. I, too, don't think it's a 7.65 Parabellum.
__________________
"... Liberty is the seed and soil, the air and light, the dew and rain of progress, love and joy."-- Robert Greene Ingersoll 1894
ithacaartist is offline   Reply With Quote
Unread 02-28-2023, 10:50 AM   #13
DonVoigt
User
 
DonVoigt's Avatar
 
Join Date: Apr 2015
Location: near Charlotte NC
Posts: 4,674
Thanks: 1,435
Thanked 4,341 Times in 2,036 Posts
Default

The bottom groove is not a "cannalure", it is simply the extractor cut or rim "rebate".
A cannelure is on the projectile and is where the case neck crimps into the bullet.

I agree though, toss the ammo, it is not worth the risk! In fact it would have negative value to me.
If you can figure out what the semi-rimmed lead rounds are, they may be "collectible" to someone- but not for shooting.

JMHO.
__________________
03man(Don Voigt); Luger student and collector.
Looking for DWM side plate: 69 ; Dreyse 1907 pistol K.S. Gendarmerie
DonVoigt is offline   Reply With Quote
The following 5 members says Thank You to DonVoigt for your post:
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 06:46 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright © 1998 - 2023, Lugerforum.com