LugerForum Discussion Forums my profile | register | faq | search
upload photo | donate | calendar

Go Back   LugerForum Discussion Forums > Luger Discussion Forums > All Post-WWII Lugers

Reply
Thread Tools Display Modes
Unread 09-13-2020, 12:49 PM   #1
JB2020
New User
 
Join Date: Sep 2020
Posts: 4
Thanks: 0
Thanked 4 Times in 2 Posts
Default G-Code Luger, Russian Capture, VoPo (DDR)

Good morning. This is my first post on this forum, and I'm pleased to be here.

I'm not particularly literate with the history of P08s or DDR military firearms, so I have a few questions throughout the post that I'm hoping the subject matter experts will be able to shed some light on. Besides that, I just wanted to share this very neat piece of history. Enjoy and thanks in advance!

Here is a recently acquired G-Code Luger. It looks to have had a very interesting journey. It has an “X” stamped on the front of the receiver, which I believe indicates Russian capture. Imported by "SSME PLANT CTY FL."

It also appears to have a Volks Polizei police stamp, as shown in pic #2. Does anyone know what "20" inside the sunburst would indicate? I assume it would be linked to a specific VoPo entity / location. From what I've read, the DDR exported relatively small numbers of former VoPo pistols with all VoPo markings defaced. Then, after reunification, more of such pistols were pulled from storage and exported for much needed cash inflow, with markings intact, as this was no longer a concern.

The barrel has the East German crown stamped on the bottom, which would have been installed during DDR refurbishing, and I believe the "N" crown-stamped DDR P08 barrels were manufactured in post-war Czechoslovakia. Why did the Czechs supply these barrels? My understanding is that the DDR manufactured P08s in small numbers, so wouldn't they have had the manufacturing capacity to supply their own P08 barrels for refurbishment?

The grips are VoPo replacements, with the classic “bullseye” at the top of them. That bakelite is so cool - when you really look at it in the proper light, it's reddish-brown with a green tint.

The magazine is East German manufactured, with a matched serial number. My understanding is that the DDR refurbished P08s would get two matching mags, marked as "1" and "2" with the respective serial number. Shame that the "2" mag for this piece is surely long gone.

I'm guessing that the firing pin is force - matched... I doubt that parts were being electro-penciled from the factory in the late '30s.

It may have been refinished at some point in its life, as the finish is fairly even across the force-matched parts.

Also note the “234” that is electro-penciled on the front of the grip… I’m guessing this was basically a cage code? Or would this be linked to the Soviet or DDR refurbishing process?

To my limited knowledge, the Soviets supplied these captured P08s to the DDR after the war, and most of them ended up with the VoPo, but some went to various DDR military / paramilitary entities. It also seems that these VoPo P08s are typically very serviceable, as both the Soviets and DDR were quite good at refurbishing them.

So, from what I know about these, this P08 was manufactured pre-war, likely captured on the Eastern front from a German army unit, hastily refurbished by the Soviets, then given to the DDR to become a police pistol after another refurbishment, then exported to the US after reunification.

On the topic of its life during WW2 - do its original markings give any indication of what unit may have carried it? I fully understand that the Germans generally did not put unit affiliation markings on their weapons, but I figure there may be some trends with where (or with who) certain years of manufacture or serial number ranges ended up.

Overall, the piece is in very nice condition, and I bet it will make a great shooter. I really do enjoy learning more about these pieces of history, and I look forward to hearing what you all think. Pics below. Enjoy!

Jack
Attached Thumbnails
Click image for larger version

Name:	20200820_192423.jpg
Views:	99
Size:	201.9 KB
ID:	80603  

Click image for larger version

Name:	20200820_190225.jpg
Views:	99
Size:	124.9 KB
ID:	80604  

Click image for larger version

Name:	20200820_190200.jpg
Views:	95
Size:	119.5 KB
ID:	80605  

Click image for larger version

Name:	20200820_190055.jpg
Views:	102
Size:	197.0 KB
ID:	80606  

Click image for larger version

Name:	20200820_190145.jpg
Views:	83
Size:	105.2 KB
ID:	80607  

Click image for larger version

Name:	20200820_190307.jpg
Views:	90
Size:	163.4 KB
ID:	80608  

Click image for larger version

Name:	20200820_190318.jpg
Views:	87
Size:	162.9 KB
ID:	80609  

Click image for larger version

Name:	20200820_190323.jpg
Views:	98
Size:	140.2 KB
ID:	80610  

Click image for larger version

Name:	20200820_190744.jpg
Views:	88
Size:	98.8 KB
ID:	80611  

JB2020 is offline   Reply With Quote
The following member says Thank You to JB2020 for your post:
Unread 09-13-2020, 12:52 PM   #2
JB2020
New User
 
Join Date: Sep 2020
Posts: 4
Thanks: 0
Thanked 4 Times in 2 Posts
Default More pics.

More pics.
Attached Thumbnails
Click image for larger version

Name:	20200820_190342.jpg
Views:	80
Size:	126.3 KB
ID:	80612  

Click image for larger version

Name:	20200820_192324.jpg
Views:	80
Size:	89.0 KB
ID:	80613  

Click image for larger version

Name:	20200820_190359.jpg
Views:	69
Size:	218.9 KB
ID:	80614  

Click image for larger version

Name:	20200820_190427.jpg
Views:	77
Size:	88.3 KB
ID:	80615  

Click image for larger version

Name:	20200820_190456.jpg
Views:	78
Size:	73.6 KB
ID:	80616  

Click image for larger version

Name:	20200820_192737.jpg
Views:	80
Size:	61.7 KB
ID:	80617  

Click image for larger version

Name:	20200820_192748.jpg
Views:	76
Size:	162.3 KB
ID:	80618  

JB2020 is offline   Reply With Quote
The following 3 members says Thank You to JB2020 for your post:
Unread 09-13-2020, 01:52 PM   #3
Doubs
User
 
Doubs's Avatar
 
Join Date: Jun 2002
Location: Byron, Georgia
Posts: 1,663
Thanks: 762
Thanked 1,586 Times in 517 Posts
Default

Your Luger was rebuilt in East Germany from parts that came from numerous guns. The barrel was replaced with a new one and the crown/N stamp is a standard EG proof. The barrels were newly made by VEB Earnst Thaelmann in East Germany. Some - not all - have a date stamp such as 953 (Sep, 1953)

The 20 in the sunburst is a unit or district mark. The X may - or may not be - a Russian capture mark. A post-war directive said that German police who were armed after the war would have arms that were distinctly marked and that may be the reason for the X. Who marked them and when may never be known.

Police magazines are normally marked 1 & 2 as you say.

There is a good amount of information about EG Lugers in the book "THE PARABELLUM IS BACK! 1945 ~ 2000" by Bauldino & Vlimmeren.
Doubs is offline   Reply With Quote
Unread 09-13-2020, 04:09 PM   #4
Sergio Natali
User
 
Sergio Natali's Avatar
 
Join Date: Feb 2013
Location: Somewhere in Northern Italy
Posts: 2,646
Thanks: 1,082
Thanked 1,783 Times in 1,007 Posts
Default

Welcome to this LUGER forum from Italy.

Also my first Luger was a "Russian Capture" from 1942. and like yours was only some kind of mixmaster, or part gun if we prefer to call it like that, not being a collectible I used it several times at the shooting range.
It was my "school-ship "to learn how to disassemble and reassemble a Luger.
Enjoy it, and by the way, nice close-ups.
__________________
"Originality can't be restored and should be at the top of any collector's priority list.
Sergio Natali is offline   Reply With Quote
The following member says Thank You to Sergio Natali for your post:
Unread 09-13-2020, 04:25 PM   #5
Fla.Mallard
User
 
Fla.Mallard's Avatar
 
Join Date: Jun 2020
Posts: 99
Thanks: 244
Thanked 95 Times in 37 Posts
Default

The lighting on those photos is perfect .. very nice job.
Fla.Mallard is offline   Reply With Quote
Unread 09-13-2020, 04:59 PM   #6
tomaustin
Lifer X5
Lifetime Forum
Patron
 
Join Date: Sep 2008
Location: texas
Posts: 708
Thanks: 87
Thanked 522 Times in 201 Posts
Default

did you buy a box of parts down at the local flea market ?
tomaustin is offline   Reply With Quote
Unread 09-13-2020, 05:00 PM   #7
JB2020
New User
 
Join Date: Sep 2020
Posts: 4
Thanks: 0
Thanked 4 Times in 2 Posts
Default

Thank you all for the replies!

Quote:
Originally Posted by Doubs View Post
Your Luger was rebuilt in East Germany from parts that came from numerous guns. The barrel was replaced with a new one and the crown/N stamp is a standard EG proof. The barrels were newly made by VEB Earnst Thaelmann in East Germany. Some - not all - have a date stamp such as 953 (Sep, 1953)

The 20 in the sunburst is a unit or district mark. The X may - or may not be - a Russian capture mark. A post-war directive said that German police who were armed after the war would have arms that were distinctly marked and that may be the reason for the X. Who marked them and when may never be known.

Police magazines are normally marked 1 & 2 as you say.

There is a good amount of information about EG Lugers in the book "THE PARABELLUM IS BACK! 1945 ~ 2000" by Bauldino & Vlimmeren.
Thanks for the info about the barrel. I don't know why I thought the "N Crown" barrels came from Czechoslovakia... I checked the barrel for a date stamp - there's nothing other than the "N Crown."

I'm convinced that the "X" is a Russian capture mark. I compared it to the "X" on a Russian capture K98k, and it is totally identical in size, and even has the exact same weak stamping in one of the corners of the "X." Perhaps the VoPo stamp would have been the identification marking for designating it for official DDR duty? Again, I am no expert on P08s, or East German stuff.

I'll have to check the book out. I'd love to find out where the "20" in the sunburst is linked to.
JB2020 is offline   Reply With Quote
Unread 09-13-2020, 05:11 PM   #8
JB2020
New User
 
Join Date: Sep 2020
Posts: 4
Thanks: 0
Thanked 4 Times in 2 Posts
Default

Quote:
Originally Posted by Sergio Natali View Post
Welcome to this LUGER forum from Italy.

Also my first Luger was a "Russian Capture" from 1942. and like yours was only some kind of mixmaster, or part gun if we prefer to call it like that, not being a collectible I used it several times at the shooting range.
It was my "school-ship "to learn how to disassemble and reassemble a Luger.
Enjoy it, and by the way, nice close-ups.
I agree that this is an excellent piece to start a P08 collection. Mixed parts but totally serviceable. Again, it looks to be nicely refurbished, so I'm sure it will shoot quite well. I definitely plan to take good care of it, though.
JB2020 is offline   Reply With Quote
Unread 09-13-2020, 10:56 PM   #9
Heinz
User
 
Heinz's Avatar
 
Join Date: Jun 2002
Location: Greenville SC
Posts: 1,004
Thanks: 377
Thanked 410 Times in 180 Posts
Default

I like it. Very nice photos. The VoPo Lugers are not beauty queens but they show an interesting history, a gun from a war lost and then brought back to life by German ingenuity in a practically bankrupt vassal state. They are survivors and still shooting.
Glad your old vetran found a good home
Heinz is offline   Reply With Quote
Unread 09-14-2020, 11:02 PM   #10
mrerick
Super Moderator - Patron
LugerForum
Life Patron
 
mrerick's Avatar
 
Join Date: Dec 2009
Location: Eastern North Carolina, USA
Posts: 3,900
Thanks: 1,370
Thanked 3,094 Times in 1,503 Posts
Default

The importer may still be in buisness!

http://fflgundealers.net/ssme.html

http://flcompanydb.com/company/P9700...affen-inc.html
__________________
Igitur si vis pacem, para bellum -
- Therefore if you want peace, prepare for war.
mrerick is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 01:15 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright © 1998 - 2023, Lugerforum.com