1917 Artillery from Turkey with original Stock and Rig

evrenay · 07-16-2011, 03:56 PM

Hello,

here is an 1917 Artillery from Turkey. It belongs to a friend of mine (Emre_Bayrak) and I hope that he will join the Lugerforum soon.

As far as I know it is a all matching numbers pistol, however I can not read the serial number because of the low resolution of the photos.

Grips are original Ivory. Raw ivory was bought from Kapalı Çarşı (Grand Bazaar) in İstanbul and shaped by a master. I do not know where he lives, but I will learn it soon and share with you.

Additionally; it is my first time uploading photos directly to forum, so if mistakes occur, please be patient. I think I can upload only a maximum number of ten pictures at one time.

evrenay · 07-16-2011, 03:58 PM

Remaining two photos:

By the way, the photos was taken by my friend and sent me via e-mail.

alanint · 07-16-2011, 04:33 PM

Sadly, Ivory can no longer be imported into the United States under most circumstances.

silverknife · 07-16-2011, 10:24 PM

Doug-

I can provide you with the name and contact info of a supplier of legal ivory if you want to have ivory grips made for any of your guns. I purchase blocks of elephant ivory from him for knife handles. Certificates attesting to the legality of the ivory are supplied with all purchases. Below are photos of a set of elephant ivory grips I had made for my Randall .45.

Regards,
Doug

lugerholsterrepair · 07-17-2011, 12:43 PM

Doug..Pretty nice! How was the image achieved? It doesn't look like hand done scrimshaw...?

silverknife · 07-17-2011, 03:16 PM

It is hand done by a Gent in Virginia Beach- Rick Bowles. Rick is well known in the knife collecting fraternity. He has been the official scrimshander for Randall Made Knives for many years. I don't want to hijack the thread but among the many pieces of his which I have collected over the years, this piece which I commissioned in consulation with the late Carlos Hathcock, GySgt, USMC and his family is probably my favorite. As you can see, he does very fine color scrimshaw as well. The engraving on the Hathcock knife is by David Perdue, the pure silver hilt on Rick's twenty-fifth anniversary knife is from my shop. The handles on the Hathcock Knife and on the knife with the wood duck are elephant ivory. The Florida Panther is scrimshawed on a inlay of elephant ivory, the sheath is covered in cane toad skin by Greg Gutcher, Sullivans Holster Shop, Tampa, Florida. All three knives are Randall Made, Orlando, FL.

Regards,
Doug

ithacaartist · 07-18-2011, 04:31 PM

Doug, (silverknife)
These grips and handles are gorgeous work, by obvious masters! The Turkish set has a really nice fit, as do the Bowles examples.
I'd also be interested in the contact info for the legal ivory source; please PM me if not posted--thanks.
D.P.

silverknife · 07-18-2011, 10:01 PM

Thank you for the kind words. Hopefully I am not violating any Forum rules by posting this link to David Warther's web site. I have known him and done business with him for many years as have many of my friends and associates in the custom knife collector's world.

http://www.ivorybuyer.com/?page=main

Regards,
Doug

07-16-2011, 03:56 PM	#1
evrenay User Join Date: Jun 2011 Location: Eskişehir/Türkiye Posts: 45 Thanks: 1 Thanked 18 Times in 4 Posts	1917 Artillery from Turkey with original Stock and Rig Hello, here is an 1917 Artillery from Turkey. It belongs to a friend of mine (Emre_Bayrak) and I hope that he will join the Lugerforum soon. As far as I know it is a all matching numbers pistol, however I can not read the serial number because of the low resolution of the photos. Grips are original Ivory. Raw ivory was bought from Kapalı Çarşı (Grand Bazaar) in İstanbul and shaped by a master. I do not know where he lives, but I will learn it soon and share with you. Additionally; it is my first time uploading photos directly to forum, so if mistakes occur, please be patient. I think I can upload only a maximum number of ten pictures at one time. Attached Thumbnails

07-16-2011, 03:58 PM	#2
evrenay User Join Date: Jun 2011 Location: Eskişehir/Türkiye Posts: 45 Thanks: 1 Thanked 18 Times in 4 Posts	Remaining two photos: By the way, the photos was taken by my friend and sent me via e-mail. Attached Thumbnails

07-16-2011, 10:24 PM	#4
silverknife User Join Date: Feb 2011 Location: Western New York Posts: 78 Thanks: 11 Thanked 19 Times in 13 Posts	Doug- I can provide you with the name and contact info of a supplier of legal ivory if you want to have ivory grips made for any of your guns. I purchase blocks of elephant ivory from him for knife handles. Certificates attesting to the legality of the ivory are supplied with all purchases. Below are photos of a set of elephant ivory grips I had made for my Randall .45. Regards, Doug Attached Thumbnails __________________ Need #23 side plate & toggle axle pin and #01 hold open.

07-17-2011, 12:43 PM	#5
lugerholsterrepair Moderator Lifetime Forum Patron Join Date: Jun 2002 Location: Arizona/Colorado Posts: 7,760 Thanks: 4,848 Thanked 3,099 Times in 1,426 Posts	Doug..Pretty nice! How was the image achieved? It doesn't look like hand done scrimshaw...? __________________ Jerry Burney 11491 S. Guadalupe Drive Yuma AZ 85367-6182 lugerholsterrepair@earthlink.net 928 342-7583 (CO & AZ) Year Round 719 207-3331 (cell) "For those who Fight For It, Life has a flavor the protected will never know."

07-17-2011, 03:16 PM	#6
silverknife User Join Date: Feb 2011 Location: Western New York Posts: 78 Thanks: 11 Thanked 19 Times in 13 Posts	It is hand done by a Gent in Virginia Beach- Rick Bowles. Rick is well known in the knife collecting fraternity. He has been the official scrimshander for Randall Made Knives for many years. I don't want to hijack the thread but among the many pieces of his which I have collected over the years, this piece which I commissioned in consulation with the late Carlos Hathcock, GySgt, USMC and his family is probably my favorite. As you can see, he does very fine color scrimshaw as well. The engraving on the Hathcock knife is by David Perdue, the pure silver hilt on Rick's twenty-fifth anniversary knife is from my shop. The handles on the Hathcock Knife and on the knife with the wood duck are elephant ivory. The Florida Panther is scrimshawed on a inlay of elephant ivory, the sheath is covered in cane toad skin by Greg Gutcher, Sullivans Holster Shop, Tampa, Florida. All three knives are Randall Made, Orlando, FL. Regards, Doug Attached Thumbnails __________________ Need #23 side plate & toggle axle pin and #01 hold open.

07-16-2011, 04:33 PM	#3
alanint User Join Date: Mar 2008 Location: Marco Island, Florida Posts: 4,867 Thanks: 1,685 Thanked 1,916 Times in 1,192 Posts	Sadly, Ivory can no longer be imported into the United States under most circumstances.

07-18-2011, 04:31 PM	#7
ithacaartist Twice a Lifer Lifetime Forum Patron Join Date: Mar 2011 Location: Atop the highest hill in Schuyler County NY Posts: 3,283 Thanks: 7,007 Thanked 2,476 Times in 1,319 Posts	Doug, (silverknife) These grips and handles are gorgeous work, by obvious masters! The Turkish set has a really nice fit, as do the Bowles examples. I'd also be interested in the contact info for the legal ivory source; please PM me if not posted--thanks. D.P.

07-18-2011, 10:01 PM	#8
silverknife User Join Date: Feb 2011 Location: Western New York Posts: 78 Thanks: 11 Thanked 19 Times in 13 Posts	Thank you for the kind words. Hopefully I am not violating any Forum rules by posting this link to David Warther's web site. I have known him and done business with him for many years as have many of my friends and associates in the custom knife collector's world. http://www.ivorybuyer.com/?page=main Regards, Doug __________________ Need #23 side plate & toggle axle pin and #01 hold open.