6 inch P08 9mm

SteveM · 06-25-2011, 08:32 PM

If anyone is looking for one of these here ya go:

http://www.auctionarms.com/search/di...emnum=10427724

Conny · 06-26-2011, 03:19 PM

All the firearms I want always come out of the woodwork when I'm broke. Life is cruel sometimes.

rhuff · 06-26-2011, 06:11 PM

Oh my, Oh my, I may be in trouble!! I wish that I haden't seen that link. I have some real heavy thinking to do in the next 2 days... I really want one, and that one appears to be essentially new. Actually, thanks for the info.....I think!

ithacaartist · 06-26-2011, 07:45 PM

Me too, it's configured just the way I'd choose. It would a brand new shooter. But starting at $1225? The woodwork will probably pop out another if this one goes by.

lugerholsterrepair · 06-26-2011, 07:56 PM

Guys..save your money for a real Luger. These second hand import marked things look cheap with all that junk written all over them. I don't mind replica stuff that's done right but these just scream WHY???? Sort of like today's teenagers with funky tattoos all over..why ruin natural beauty.
Besides the Eagle is washed out like a tattoo on a 60 year old. Was Mauser too cheap to put it on right?
The whole thing burns my eyes.

Michael Zeleny · 06-26-2011, 08:06 PM

The postwar "Original Mauser" is the only Luger that I ever saw assembled by the factory with a loose sideplate, a part whose fit is critical to the quality of trigger pull and safe operation of the pistol. That, and the voids observed in the castings of its major assemblies, dispelled my interest in this variation.

ithacaartist · 06-26-2011, 09:54 PM

I noticed that the eagle had virtually no relief and thought it would be best off re-engraved, all crispy, just for fun. But maybe I should go Ron one further and say "Anything later than George Luger's latest prototype is a reproduction."!!! That should do it! I think it's a question of who collects what, and we should all just be happy about it. Slightly different Q.C. and engineering created all these variations, from factory to factory, arsenal to arsenal, and it even seems like minute to minute. I think it's simply where the individual draws the line. Is there a collector on the forum who owns an Airsoft, just for grins and giggles...or modern pictures of Lugers, just because of the gun's lines? Or a little cast Luger, just for the keychain. All perhaps silly stuff to a "real" collector, but then, who gets to define what a collector is? (From M.P & the Holy Grail, "He's, the King, you say? Well, I didn't vote for him!")
The "Original" Mausers, Mitchell/Aimco/Stoeger stuff all help to give a sense of perspective to all the Lugers made up until the end of WWll; and people still want them, for whatever reason. Sure, I might get one to shoot, and hang onto it for that reason, but foremost I would refrain from paying too much

So this gun is overpriced, for me. I've been reading and discussing matters for several months straight. This intense interest alone does not make me expert, only gives me the goal to strive for. Similar postings ask the same question--is it worth what they're asking? The heavy hitters on the forum are a group that know their stuff from their own experience, plus plenty of research--you can tell by how and what they write. What I gather from their consensus is that, "Well, if you're going to buy one of those things, I wouldn't pay any more than $4-800 for it..." And it is the increased risk of owning/collecting something with issues and flaws--in addition to its perceived/judged lack of originality, that is what should keep the prices of these things near the bottom of the ladder until something newer and worse comes along.

A fellow user said here somewhere that everybody with a Luger for sale thinks it is worth a fortune. It is a shame that under-informed individuals and dealers (not to mention the scammers) affect the collecting marker so much. The power that collectors have is to educate the others in the market about Lugers, and to refrain from paying too much for a Luger themselves.

hansfischer007 · 06-27-2011, 09:32 PM

I bought one of the Interarms Mausers couple months ago....6" Barrel.....and I Love it..!.....to me the Eagle and the Mauser logo look good........and it shoots great......a real tack driver..!

06-25-2011, 08:32 PM	#1
SteveM User Join Date: Jun 2002 Location: Texas Posts: 1,016 Thanks: 94 Thanked 275 Times in 137 Posts	6 inch P08 9mm If anyone is looking for one of these here ya go: http://www.auctionarms.com/search/di...emnum=10427724

06-26-2011, 03:19 PM	#2
Conny User Join Date: Dec 2006 Location: Culpeper, Va. Posts: 279 Thanks: 0 Thanked 26 Times in 13 Posts	All the firearms I want always come out of the woodwork when I'm broke. Life is cruel sometimes. __________________ Rangers Lead the Way, Duane Leiker

06-26-2011, 07:56 PM	#5
lugerholsterrepair Moderator Lifetime Forum Patron Join Date: Jun 2002 Location: Arizona/Colorado Posts: 7,772 Thanks: 4,931 Thanked 3,124 Times in 1,434 Posts	Guys..save your money for a real Luger. These second hand import marked things look cheap with all that junk written all over them. I don't mind replica stuff that's done right but these just scream WHY???? Sort of like today's teenagers with funky tattoos all over..why ruin natural beauty. Besides the Eagle is washed out like a tattoo on a 60 year old. Was Mauser too cheap to put it on right? The whole thing burns my eyes. __________________ Jerry Burney 11491 S. Guadalupe Drive Yuma AZ 85367-6182 lugerholsterrepair@earthlink.net 928 342-7583 (CO & AZ) Year Round 719 207-3331 (cell) "For those who Fight For It, Life has a flavor the protected will never know."

06-26-2011, 08:06 PM	#6
Michael Zeleny Patron LugerForum Patron Join Date: Jul 2003 Location: Los Angeles Posts: 525 Thanks: 129 Thanked 139 Times in 76 Posts	The postwar "Original Mauser" is the only Luger that I ever saw assembled by the factory with a loose sideplate, a part whose fit is critical to the quality of trigger pull and safe operation of the pistol. That, and the voids observed in the castings of its major assemblies, dispelled my interest in this variation. __________________ Michael Zeleny@post.harvard.edu -- http://larvatus.livejournal.com/ -- 7576 Willow Glen Road, Los Angeles, CA 90046 -- 323.363.1860 All of old. Nothing else ever. Ever tried. Ever failed. No matter. Try again. Fail again. Fail better. -- Samuel Beckett

06-27-2011, 09:32 PM	#8
hansfischer007 User Join Date: Nov 2010 Location: Sunny Tennessee Posts: 233 Thanks: 509 Thanked 96 Times in 48 Posts	Interarms Mauser I bought one of the Interarms Mausers couple months ago....6" Barrel.....and I Love it..!.....to me the Eagle and the Mauser logo look good........and it shoots great......a real tack driver..!

06-26-2011, 06:11 PM	#3
rhuff Patron LugerForum Patron Join Date: Mar 2011 Location: Az. Posts: 2,291 Thanks: 2,709 Thanked 972 Times in 717 Posts	Oh my, Oh my, I may be in trouble!! I wish that I haden't seen that link. I have some real heavy thinking to do in the next 2 days... I really want one, and that one appears to be essentially new. Actually, thanks for the info.....I think!

06-26-2011, 07:45 PM	#4
ithacaartist Twice a Lifer Lifetime Forum Patron Join Date: Mar 2011 Location: Atop the highest hill in Schuyler County NY Posts: 3,346 Thanks: 7,271 Thanked 2,578 Times in 1,365 Posts	Me too, it's configured just the way I'd choose. It would a brand new shooter. But starting at $1225? The woodwork will probably pop out another if this one goes by.

06-26-2011, 09:54 PM	#7
ithacaartist Twice a Lifer Lifetime Forum Patron Join Date: Mar 2011 Location: Atop the highest hill in Schuyler County NY Posts: 3,346 Thanks: 7,271 Thanked 2,578 Times in 1,365 Posts	I noticed that the eagle had virtually no relief and thought it would be best off re-engraved, all crispy, just for fun. But maybe I should go Ron one further and say "Anything later than George Luger's latest prototype is a reproduction."!!! That should do it! I think it's a question of who collects what, and we should all just be happy about it. Slightly different Q.C. and engineering created all these variations, from factory to factory, arsenal to arsenal, and it even seems like minute to minute. I think it's simply where the individual draws the line. Is there a collector on the forum who owns an Airsoft, just for grins and giggles...or modern pictures of Lugers, just because of the gun's lines? Or a little cast Luger, just for the keychain. All perhaps silly stuff to a "real" collector, but then, who gets to define what a collector is? (From M.P & the Holy Grail, "He's, the King, you say? Well, I didn't vote for him!") The "Original" Mausers, Mitchell/Aimco/Stoeger stuff all help to give a sense of perspective to all the Lugers made up until the end of WWll; and people still want them, for whatever reason. Sure, I might get one to shoot, and hang onto it for that reason, but foremost I would refrain from paying too much So this gun is overpriced, for me. I've been reading and discussing matters for several months straight. This intense interest alone does not make me expert, only gives me the goal to strive for. Similar postings ask the same question--is it worth what they're asking? The heavy hitters on the forum are a group that know their stuff from their own experience, plus plenty of research--you can tell by how and what they write. What I gather from their consensus is that, "Well, if you're going to buy one of those things, I wouldn't pay any more than $4-800 for it..." And it is the increased risk of owning/collecting something with issues and flaws--in addition to its perceived/judged lack of originality, that is what should keep the prices of these things near the bottom of the ladder until something newer and worse comes along. A fellow user said here somewhere that everybody with a Luger for sale thinks it is worth a fortune. It is a shame that under-informed individuals and dealers (not to mention the scammers) affect the collecting marker so much. The power that collectors have is to educate the others in the market about Lugers, and to refrain from paying too much for a Luger themselves.