3D model Mauser Cone Chammer

Makarov · 09-17-2008, 11:00 AM

3D model Mauser Cone Chammer

Vlim · 09-17-2008, 11:13 AM

Very, very, very nice work!!!

Ron Wood · 09-17-2008, 12:09 PM

Absolutely beautiful! One small comment...there is no step in the barrel of a conehammer, unless the barrel has been replaced. The step is found on a Model 1930.

John Sabato · 09-17-2008, 05:39 PM

Vladimir,

Your graphics work is absolutely amazing!

alvin · 09-17-2008, 05:54 PM

Absolutely cool !!!

It will be even better if the front sight could be drawn higher..... low profile front sight only appears on fix sight CH.

Best drawing that I've seen so far!

=====

If I could find a CH in this pristine condition, I will be ALL on it.

Imperial Arms · 09-17-2008, 06:43 PM

The dude can do some serious CAD!! I am impressed! I especially like the CAD of the 20-Shot Cone Hammer, one of which I have in my collection.

Fabulous,
Albert

P.S. Typical! - Ron had to make a comment, but the ring on your diagram does not show on the surface. However, for accuracy, the ring should be eliminated.

alvin · 09-17-2008, 08:55 PM

This CAD (computer product?) drawing indeed paid lots of attention to details, including the polished frame edge between the grip and lock frame lug in the 2nd picture! The rear sight pin and the top of rear sight ramp are not blued either.

I assume the trigger in "white" being correct.... some color pictures in Erickson's book showing strawed trigger, but all instances (standard CHs) that I've met so far do not show any trace of golden color on triggers. Maybe too old to keep that color (less likely because the whole trigger assembly, inside out, is in white), or maybe there are some sub-variations.

John Sabato · 09-17-2008, 09:24 PM

Most of you new guys on this forum are impressed by Vladimir's ability and rightly so, but what makes his graphics so much more impressive is that living in Russia, he has no chance to own the guns he draws... the drawings are created from his engineering imagination from studying other drawings and photographs...and blueprints when they are available.

to see other examples of his work, do a search of the forums for other posts he has made. He has been kind enough to share all of his previous work with us...

Thanks again Vladimir.

Makarov · 09-18-2008, 04:36 AM

Thank you all for good words.
Ron I understand comparatively M30. My 3D-model Cone Chammer has not this. This Ã?Â®Ã?Â¯Ã?Â²Ã?Â¨Ã?Â·Ã?Â¥Ã?ÂªÃ?Â¨Ã?Â© dog-leg.

Albert

You Ã?Â¨Ã?Â¬Ã?Â¥Ã?Â¥Ã?Â¼Ã?Â¥ in its collections the 20-Shot Cone Hammer? WAW!!!!!
This much splendid. You may send me several photographies?
I shall much thanked You.
I wants to do 3D-model all varieties Mauser C96.
But I have little information and qualitative photographies Mauser and parts.
I in the same way have a greater problem with drawings Mauser C96/ Someone can help I search these drawings?
I much likes Mauser C96 and Luger.
But to regret in Russia this not real that have this.
Possible someone does a book comparatively Mauser C96. I was lucky have a possibility to help to do beautiful jpgs for this books for different models Mauser C96. But me needed qualitative drawings.
I shall very lucky any help from you.
Thank you.

Steinar · 09-18-2008, 05:37 AM

Your work is amazing Makarov!
Can't help you out with puctures of the Cone hammer C96, but for the Luger I'm just happy to help out if needed

alvin · 09-18-2008, 06:03 AM

Quote:

Originally posted by Makarov
But me needed qualitative drawings.

How to measure the size accurately?

Makarov · 09-18-2008, 06:11 AM

I searches like drawings Mauser C96

alvin · 09-18-2008, 06:53 AM

Too few persons wanted "papers" in 1945. Looks like almost everyone rushed to "hardware". It's too late to regret for their near-sightness.

I have not seen any complete dementional drawings of C96 nor Luger. It will be great work in this area, probably via reverse-engineering. Lots of work, thanks for the effort.

Makarov · 09-18-2008, 08:10 AM

"It will be great work in this area, probably via reverse-engineering."

Imperial Arms · 09-18-2008, 12:20 PM

Hello Vladimir,

With the superb CAD which can create, you could easily find a very high paying job in Europe (likely with a major arms manufacturer) if you could 'escape' from Russia. You have some brillant talent which is hard to find.

Great work,
Albert

Send me an e-mail to imperialarms@att.net and I shall send you some images of my 20-Shot plus a few other Mauser C96 pistols - that should keep you busy!

alvin · 09-19-2008, 07:48 PM

Here is my virtual 20-shot

Makarov · 09-20-2008, 11:29 AM

Today I has seen this link about Mauser 20-round magazine.
http://www.gunbroker.com/Auction/Vie...Item=110686403
Anyone can write a letter a seller and ask to take photographs this pistol? This was very big help for me.
Thank you.

alvin · 09-20-2008, 01:33 PM

Vladimir -- I'm lost. You must be interested in very specific area.... the seller posted a few pictures in his advertisement. If you could be more specific, I could send him a message asking for help (help or not will be up to him, I am not bidding on his item, but there are various kinds of people in the cyberspace, we never know).

alvin · 09-20-2008, 09:47 PM

Sent Mr. Martin an invitation to this thread. If he's curious about "What are they talking about my gun", he will come.

Makarov · 09-20-2008, 09:52 PM

Thank you.
Was much splendid, if Mr. Martin has done many different photographies of this pistol.
Ideal variant - to place on the scanner and do a many scene of each detail.
I in the same way can do some beautiful 3D-jpgs for Mr. Martin - for the advertisment of its pistol.

09-17-2008, 11:00 AM	#1
Makarov User Join Date: Mar 2006 Posts: 45 Thanks: 0 Thanked 0 Times in 0 Posts	3D model Mauser Cone Chammer 3D model Mauser Cone Chammer

09-17-2008, 12:09 PM	#3
Ron Wood Moderator 2010 LugerForum Patron Join Date: Jun 2002 Location: Santa Teresa New Mexico just outside of the West Texas town of El Paso Posts: 6,994 Thanks: 1,070 Thanked 5,105 Times in 1,680 Posts	Absolutely beautiful! One small comment...there is no step in the barrel of a conehammer, unless the barrel has been replaced. The step is found on a Model 1930. __________________ If it's made after 1918...it's a reproduction

09-17-2008, 05:39 PM	#4
John Sabato Lifer Lifetime Forum Patron Join Date: Jun 2002 Location: The Capital of the Free World Posts: 10,152 Thanks: 3,003 Thanked 2,304 Times in 1,096 Posts	Vladimir, Your graphics work is absolutely amazing! __________________ regards, -John S "...We hold these truths to be self-evident that ALL men are created EQUAL *and are endowed by their Creator* with certain UNALIENABLE* rights, and among these are life, LIBERTY, and the pursuit of happiness..."*

09-17-2008, 09:24 PM	#8
John Sabato Lifer Lifetime Forum Patron Join Date: Jun 2002 Location: The Capital of the Free World Posts: 10,152 Thanks: 3,003 Thanked 2,304 Times in 1,096 Posts	Most of you new guys on this forum are impressed by Vladimir's ability and rightly so, but what makes his graphics so much more impressive is that living in Russia, he has no chance to own the guns he draws... the drawings are created from his engineering imagination from studying other drawings and photographs...and blueprints when they are available. to see other examples of his work, do a search of the forums for other posts he has made. He has been kind enough to share all of his previous work with us... Thanks again Vladimir. __________________ regards, -John S "...We hold these truths to be self-evident that ALL men are created EQUAL *and are endowed by their Creator* with certain UNALIENABLE* rights, and among these are life, LIBERTY, and the pursuit of happiness..."*

09-18-2008, 05:37 AM	#10
Steinar User Join Date: May 2004 Posts: 1,538 Thanks: 18 Thanked 36 Times in 21 Posts	Your work is amazing Makarov! Can't help you out with puctures of the Cone hammer C96, but for the Luger I'm just happy to help out if needed __________________ Previously known as Morgan Kane

09-17-2008, 11:13 AM	#2
Vlim Moderator Lifetime LugerForum Patron Join Date: Oct 2002 Location: Europe Posts: 5,049 Thanks: 1,036 Thanked 3,957 Times in 1,200 Posts	Very, very, very nice work!!!

09-17-2008, 05:54 PM	#5
alvin User Join Date: Jul 2007 Location: US Posts: 3,843 Thanks: 132 Thanked 729 Times in 438 Posts	Absolutely cool !!! It will be even better if the front sight could be drawn higher..... low profile front sight only appears on fix sight CH. Best drawing that I've seen so far! ===== If I could find a CH in this pristine condition, I will be ALL on it.

09-17-2008, 06:43 PM	#6
Imperial Arms Banned Join Date: Jun 2002 Location: Malta, EU Posts: 579 Thanks: 0 Thanked 7 Times in 7 Posts	The dude can do some serious CAD!! I am impressed! I especially like the CAD of the 20-Shot Cone Hammer, one of which I have in my collection. Fabulous, Albert P.S. Typical! - Ron had to make a comment, but the ring on your diagram does not show on the surface. However, for accuracy, the ring should be eliminated.

09-17-2008, 08:55 PM	#7
alvin User Join Date: Jul 2007 Location: US Posts: 3,843 Thanks: 132 Thanked 729 Times in 438 Posts	This CAD (computer product?) drawing indeed paid lots of attention to details, including the polished frame edge between the grip and lock frame lug in the 2nd picture! The rear sight pin and the top of rear sight ramp are not blued either. I assume the trigger in "white" being correct.... some color pictures in Erickson's book showing strawed trigger, but all instances (standard CHs) that I've met so far do not show any trace of golden color on triggers. Maybe too old to keep that color (less likely because the whole trigger assembly, inside out, is in white), or maybe there are some sub-variations.

09-18-2008, 04:36 AM	#9
Makarov User Join Date: Mar 2006 Posts: 45 Thanks: 0 Thanked 0 Times in 0 Posts	Thank you all for good words. Ron I understand comparatively M30. My 3D-model Cone Chammer has not this. This Ã?Â®Ã?Â¯Ã?Â²Ã?Â¨Ã?Â·Ã?Â¥Ã?ÂªÃ?Â¨Ã?Â© dog-leg. Albert You Ã?Â¨Ã?Â¬Ã?Â¥Ã?Â¥Ã?Â¼Ã?Â¥ in its collections the 20-Shot Cone Hammer? WAW!!!!! This much splendid. You may send me several photographies? I shall much thanked You. I wants to do 3D-model all varieties Mauser C96. But I have little information and qualitative photographies Mauser and parts. I in the same way have a greater problem with drawings Mauser C96/ Someone can help I search these drawings? I much likes Mauser C96 and Luger. But to regret in Russia this not real that have this. Possible someone does a book comparatively Mauser C96. I was lucky have a possibility to help to do beautiful jpgs for this books for different models Mauser C96. But me needed qualitative drawings. I shall very lucky any help from you. Thank you.

09-18-2008, 06:11 AM	#12
Makarov User Join Date: Mar 2006 Posts: 45 Thanks: 0 Thanked 0 Times in 0 Posts	I searches like drawings Mauser C96

09-18-2008, 06:53 AM	#13
alvin User Join Date: Jul 2007 Location: US Posts: 3,843 Thanks: 132 Thanked 729 Times in 438 Posts	Too few persons wanted "papers" in 1945. Looks like almost everyone rushed to "hardware". It's too late to regret for their near-sightness. I have not seen any complete dementional drawings of C96 nor Luger. It will be great work in this area, probably via reverse-engineering. Lots of work, thanks for the effort.

09-18-2008, 08:10 AM	#14
Makarov User Join Date: Mar 2006 Posts: 45 Thanks: 0 Thanked 0 Times in 0 Posts	"It will be great work in this area, probably via reverse-engineering."

09-18-2008, 12:20 PM	#15
Imperial Arms Banned Join Date: Jun 2002 Location: Malta, EU Posts: 579 Thanks: 0 Thanked 7 Times in 7 Posts	Hello Vladimir, With the superb CAD which can create, you could easily find a very high paying job in Europe (likely with a major arms manufacturer) if you could 'escape' from Russia. You have some brillant talent which is hard to find. Great work, Albert Send me an e-mail to imperialarms@att.net and I shall send you some images of my 20-Shot plus a few other Mauser C96 pistols - that should keep you busy!

09-19-2008, 07:48 PM	#16
alvin User Join Date: Jul 2007 Location: US Posts: 3,843 Thanks: 132 Thanked 729 Times in 438 Posts	Here is my virtual 20-shot Attached Thumbnails

09-20-2008, 11:29 AM	#17
Makarov User Join Date: Mar 2006 Posts: 45 Thanks: 0 Thanked 0 Times in 0 Posts	Today I has seen this link about Mauser 20-round magazine. http://www.gunbroker.com/Auction/Vie...Item=110686403 Anyone can write a letter a seller and ask to take photographs this pistol? This was very big help for me. Thank you.

09-20-2008, 01:33 PM	#18
alvin User Join Date: Jul 2007 Location: US Posts: 3,843 Thanks: 132 Thanked 729 Times in 438 Posts	Vladimir -- I'm lost. You must be interested in very specific area.... the seller posted a few pictures in his advertisement. If you could be more specific, I could send him a message asking for help (help or not will be up to him, I am not bidding on his item, but there are various kinds of people in the cyberspace, we never know).

09-20-2008, 09:47 PM	#19
alvin User Join Date: Jul 2007 Location: US Posts: 3,843 Thanks: 132 Thanked 729 Times in 438 Posts	Sent Mr. Martin an invitation to this thread. If he's curious about "What are they talking about my gun", he will come.

09-20-2008, 09:52 PM	#20
Makarov User Join Date: Mar 2006 Posts: 45 Thanks: 0 Thanked 0 Times in 0 Posts	Thank you. Was much splendid, if Mr. Martin has done many different photographies of this pistol. Ideal variant - to place on the scanner and do a many scene of each detail. I in the same way can do some beautiful 3D-jpgs for Mr. Martin - for the advertisment of its pistol.