1900 AE Triggers

aldo35 · 05-19-2013, 09:34 PM

Hi

Were WWII P08 triggers different than the triggers that were on the 1900 AE?

I picked up a 1900 AE that did not have a trigger or trigger plate. A P08 trigger plate fits OK but the P08 triggers do not fit in the trigger well. The forward part of the trigger that the trigger lever fits is too long and prevents the trigger from going into the well.

Aldo35

Edward Tinker · 05-19-2013, 09:45 PM

the plate and the trigger would be different

mrerick · 05-20-2013, 09:08 AM

There were two different receiver lengths. The 1900 was a couple of millimeters longer at the front of the receiver than the later P.08 models...

Marc

Dwight Gruber · 05-20-2013, 10:33 AM

...but the frame length difference is entirely in front of the trigger guard, and has no effect on the trigger/sidepate difference.

--Dwight

SteveM · 05-20-2013, 12:44 PM

1900 AE triggers are somewhat narrower than the standard P08.

aldo35 · 05-20-2013, 09:41 PM

Hi

Thank you all for responding. I checked the trigger plate again and discovered I miss aligned it. The P08 does not fit this frame.

Aldo35

Parabellus · 05-20-2013, 11:55 PM

Here's a quick look at the longer frame, wider trigger guard, and narrower trigger of a 00AE compared to one P08.

sheepherder · 05-21-2013, 08:48 AM

Quote:

Originally Posted by Parabellus

Here's a quick look at the longer frame, wider trigger guard, and narrower trigger of a 00AE compared to one P08.

Russell, your link to PhotoBucket is not visible to the majority of members of this Forum. Corporate and government filters block YouTube, PhotoBucket, SmugMug and other similar social web sites (not to mention many popular pr0n sites!)

(I also found out recently that my local library has restrictions of viewable material.)

Could you please attach any pics you wish to display directly to the LugerForum thread?

We all thank you!

Karl · 05-21-2013, 09:43 AM

Aldo,

Your first post was accurate. The trigger does not fit because the flat surface in front is too long. It may be possible to modify a P-08 trigger to fit a 1900. The side plate by itself is virtually identical and interchangable but the trigger lever on the P-08 is longer, preventing installation. It should be possible to use a P-08 sideplate in a 1900 with a shortened trigger lever. Post pics of your 1900 when you can.
KFS

aldo35 · 05-22-2013, 07:48 PM

Hi,

I am attempting to post some pictures. If successful you will see an engraved 1900 AE that was chrome plated. Wen I picked it up it did not have wood grips, grip screws, grip safety or mag. It still need trigger, trigger spring,trigger plate and an extractor. So it is a work in progress.

This is the same pistol that was advertised on the forum back in Feb/Mar time frame. If I can find that thread I will post info.

Aldo35

aldo35 · 05-22-2013, 07:57 PM

Hi,

This pistol was originally offered on 1-21-2013 in the want to sell section by Capt Willard. If you go to that date in the for sale section you will see some better pictures of this pistol.

I hope to find all the missing parts and a cure for the lack of a front sight and have my self a fun shooter.

Aldo35

Ben M. · 05-23-2013, 11:56 AM

the front sight appears to be missing the sight block also. i think this was soldered to the barrel band.

alanint · 05-23-2013, 12:29 PM

No, originals were part of the barrel turning. This one has been irrepairably damaged.

05-19-2013, 09:34 PM	#1
aldo35 User Join Date: Jul 2010 Location: Northern GA Posts: 308 Thanks: 2,159 Thanked 135 Times in 67 Posts	1900 AE Triggers Hi Were WWII P08 triggers different than the triggers that were on the 1900 AE? I picked up a 1900 AE that did not have a trigger or trigger plate. A P08 trigger plate fits OK but the P08 triggers do not fit in the trigger well. The forward part of the trigger that the trigger lever fits is too long and prevents the trigger from going into the well. Aldo35

05-20-2013, 09:08 AM	#3
mrerick Super Moderator - Patron LugerForum Life Patron Join Date: Dec 2009 Location: Eastern North Carolina, USA Posts: 3,900 Thanks: 1,370 Thanked 3,094 Times in 1,503 Posts	There were two different receiver lengths. The 1900 was a couple of millimeters longer at the front of the receiver than the later P.08 models... Marc __________________ Igitur si vis pacem, para bellum - - Therefore if you want peace, prepare for war.

05-20-2013, 11:55 PM	#7
Parabellus User Join Date: Apr 2006 Location: SF Bay Posts: 195 Thanks: 16 Thanked 9 Times in 4 Posts	Here's a quick look at the longer frame, wider trigger guard, and narrower trigger of a 00AE compared to one P08. __________________ Last edited by Parabellus; 05-22-2013 at 11:48 PM.

05-22-2013, 07:48 PM	#10
aldo35 User Join Date: Jul 2010 Location: Northern GA Posts: 308 Thanks: 2,159 Thanked 135 Times in 67 Posts	Pictures of 1900 AE Hi, I am attempting to post some pictures. If successful you will see an engraved 1900 AE that was chrome plated. Wen I picked it up it did not have wood grips, grip screws, grip safety or mag. It still need trigger, trigger spring,trigger plate and an extractor. So it is a work in progress. This is the same pistol that was advertised on the forum back in Feb/Mar time frame. If I can find that thread I will post info. Aldo35 Attached Thumbnails

05-22-2013, 07:57 PM	#11
aldo35 User Join Date: Jul 2010 Location: Northern GA Posts: 308 Thanks: 2,159 Thanked 135 Times in 67 Posts	1900 ae Hi, This pistol was originally offered on 1-21-2013 in the want to sell section by Capt Willard. If you go to that date in the for sale section you will see some better pictures of this pistol. I hope to find all the missing parts and a cure for the lack of a front sight and have my self a fun shooter. Aldo35

05-19-2013, 09:45 PM	#2
Edward Tinker Super Moderator Eternal Lifer LugerForum Patron Join Date: Jun 2002 Location: North of Spokane, WA Posts: 15,909 Thanks: 1,986 Thanked 4,500 Times in 2,076 Posts	the plate and the trigger would be different

05-20-2013, 10:33 AM	#4
Dwight Gruber User Join Date: Jun 2002 Location: Portland, Oregon Posts: 3,889 Thanks: 0 Thanked 1,281 Times in 423 Posts	...but the frame length difference is entirely in front of the trigger guard, and has no effect on the trigger/sidepate difference. --Dwight

05-20-2013, 12:44 PM	#5
SteveM User Join Date: Jun 2002 Location: Texas Posts: 1,016 Thanks: 94 Thanked 275 Times in 137 Posts	1900 AE triggers are somewhat narrower than the standard P08.

05-20-2013, 09:41 PM	#6
aldo35 User Join Date: Jul 2010 Location: Northern GA Posts: 308 Thanks: 2,159 Thanked 135 Times in 67 Posts	Hi Thank you all for responding. I checked the trigger plate again and discovered I miss aligned it. The P08 does not fit this frame. Aldo35

05-21-2013, 09:43 AM	#9
Karl Lifer - Twice Over Lifetime Forum Patron Join Date: Jun 2002 Location: Savannah Posts: 514 Thanks: 0 Thanked 239 Times in 111 Posts	Aldo, Your first post was accurate. The trigger does not fit because the flat surface in front is too long. It may be possible to modify a P-08 trigger to fit a 1900. The side plate by itself is virtually identical and interchangable but the trigger lever on the P-08 is longer, preventing installation. It should be possible to use a P-08 sideplate in a 1900 with a shortened trigger lever. Post pics of your 1900 when you can. KFS

05-23-2013, 11:56 AM	#12
Ben M. User Join Date: Dec 2009 Location: Retired to Naples, FL. Posts: 474 Thanks: 82 Thanked 117 Times in 79 Posts	the front sight appears to be missing the sight block also. i think this was soldered to the barrel band.

05-23-2013, 12:29 PM	#13
alanint User Join Date: Mar 2008 Location: Marco Island, Florida Posts: 4,867 Thanks: 1,685 Thanked 1,916 Times in 1,192 Posts	No, originals were part of the barrel turning. This one has been irrepairably damaged.