Magazine Repair

Mwland · 01-04-2012, 08:34 AM

I have an issue with one of the magazines for my 1923 commercial luger. It is original and I would like to get it repaired but did not know if this is something a regular gun repair shop can do. Does anyone have any suggestions on the best way to get it repaired?

DavidJayUden · 01-04-2012, 09:05 AM

Look up our own G.T. on the list. The ONLY magazine guru out there.
But in the mean time go buy a couple of Mec-Gar mags. for the range and save the orig. for looking at.
dju

lugerholsterrepair · 01-04-2012, 11:00 AM

gctomeks@msn.com

Here is the ONLY guy on this Planet I would ever have work on my magazine.

laoshi75 · 01-04-2012, 12:03 PM

Gerald (G.T.) of course !

Mwland · 01-08-2012, 12:05 AM

Thanks to all, I contacted GT and my magazine is in transit.

Mwland · 01-15-2012, 01:50 PM

All of you guys were spot on! I just received my magazine and GT fixed the problem. Now the magazine goes on display!

newluger · 02-14-2013, 01:08 PM

A close friend gave me a couple of Luger magazines that were in pretty bad shape. Bill said "maybe you can use these for spare parts." Both magazines were in pretty bad shape, broken bases, damaged springs and dented tubes.

I contacted GT and asked if he could repair them. His reply was that he could. So I sent them on to him, and in less than a week and a half, they arrived in the mail. The work was outstanding, and it was hard to believe that they were the same ones that I had sent him. This morning, I showed them to my friend, and he too was amazed at how good they looked and the workmanship.

My hat's off to GT and we are fortunate on this forum to have such talented members.

Again to GT, Thank you so very much.

Peter
newluger

01-04-2012, 08:34 AM	#1
Mwland User Join Date: Dec 2011 Posts: 22 Thanks: 14 Thanked 4 Times in 4 Posts	Magazine Repair I have an issue with one of the magazines for my 1923 commercial luger. It is original and I would like to get it repaired but did not know if this is something a regular gun repair shop can do. Does anyone have any suggestions on the best way to get it repaired?

01-04-2012, 11:00 AM	#3
lugerholsterrepair Moderator Lifetime Forum Patron Join Date: Jun 2002 Location: Arizona/Colorado Posts: 7,772 Thanks: 4,933 Thanked 3,124 Times in 1,434 Posts	gctomeks@msn.com Here is the ONLY guy on this Planet I would ever have work on my magazine. __________________ Jerry Burney 11491 S. Guadalupe Drive Yuma AZ 85367-6182 lugerholsterrepair@earthlink.net 928 342-7583 (CO & AZ) Year Round 719 207-3331 (cell) "For those who Fight For It, Life has a flavor the protected will never know."

01-04-2012, 09:05 AM	#2
DavidJayUden Patron LugerForum Patron Join Date: Nov 2008 Posts: 4,047 Thanks: 578 Thanked 1,414 Times in 887 Posts	Look up our own G.T. on the list. The ONLY magazine guru out there. But in the mean time go buy a couple of Mec-Gar mags. for the range and save the orig. for looking at. dju

01-04-2012, 12:03 PM	#4
laoshi75 User Join Date: Oct 2004 Location: Thailand/France Posts: 490 Thanks: 288 Thanked 96 Times in 41 Posts	Gerald (G.T.) of course !

01-08-2012, 12:05 AM	#5
Mwland User Join Date: Dec 2011 Posts: 22 Thanks: 14 Thanked 4 Times in 4 Posts	Thanks to all, I contacted GT and my magazine is in transit.

01-15-2012, 01:50 PM	#6
Mwland User Join Date: Dec 2011 Posts: 22 Thanks: 14 Thanked 4 Times in 4 Posts	All of you guys were spot on! I just received my magazine and GT fixed the problem. Now the magazine goes on display!

02-14-2013, 01:08 PM	#7
newluger User Join Date: Aug 2009 Location: Franklin Tennessee Posts: 119 Thanks: 22 Thanked 10 Times in 7 Posts	A close friend gave me a couple of Luger magazines that were in pretty bad shape. Bill said "maybe you can use these for spare parts." Both magazines were in pretty bad shape, broken bases, damaged springs and dented tubes. I contacted GT and asked if he could repair them. His reply was that he could. So I sent them on to him, and in less than a week and a half, they arrived in the mail. The work was outstanding, and it was hard to believe that they were the same ones that I had sent him. This morning, I showed them to my friend, and he too was amazed at how good they looked and the workmanship. My hat's off to GT and we are fortunate on this forum to have such talented members. Again to GT, Thank you so very much. Peter newluger