my profile |
register |
faq |
search upload photo | donate | calendar |
10-17-2009, 01:29 PM | #1 |
User
Join Date: Oct 2009
Posts: 5
Thanks: 0
Thanked 0 Times in 0 Posts
|
Help Needed
Hi Everyone:
I have a DWM American Eagle grip safety 9mm Luger, #380XX. The gun is absolutely beautiful but is driving me crazy. It has been tuned by a very prominent Luger gunsmith who swears he has test fired it and it works perfectly. However, it refuses to feed, jamming every second round. I have sent it back to him three times and have finally given up. I have 5 magazines for this gun, all originals. Three have been rebuilt, springs and bases replaced, etc. The other two are East German milled magazines that look brand new. They have not been tuned. The gun will not work with any of them. The strange thing is that when I cycle the gun by hand every round feeds perfectly from every magazine. But when I shoot the gun I get constant feed jams. Sometimes the rounds ride up at a 45 degree angle with the bullets above the chamber, and sometimes the action cycles and the bolt closes on an empty chamber. I have tried all kinds of ball ammo, mostly Winchester White Box 115 grain and NATO 124 grain. Nothing works. Can anyone help me out? TIA, Phil |
10-17-2009, 01:47 PM | #2 |
User
Join Date: Aug 2007
Location: Kansas
Posts: 535
Thanks: 18
Thanked 49 Times in 33 Posts
|
Charon041 -
Problems like the one you are describing are frequently the fault of the magazine. Even though you have even tried new springs, this still sounds like a weak magazine spring to me. Or it can even be faulty positioning of the magazine lips too. Most shooters will recommend you try a MecGar brand magazine and this will likely solve the problem. Luger Doc (Tom Heller) on this Forum will have them for you if you care to order one. Another possibility has to do with your grip (believe it or not). Try a good firm grip rather than a relaxed grip and see if this makes any difference. Of course if you are already holding onto it firmly, then disregard this suggestion.
__________________
Mauser720 - Ron "Those who do not know history are doomed to repeat it." |
10-18-2009, 06:07 PM | #3 |
Lifer - Twice Over
Lifetime Forum Patron Join Date: Jun 2002
Location: Savannah
Posts: 519
Thanks: 0
Thanked 262 Times in 115 Posts
|
Phil,
Can you try your magazines in another Luger? In my experience the magazine is usually the problem so it's a good place to start. Also, what ammo is your gunsmith using? Does the hold open work? Try firing a single round - if it doesn't lock open then it is possible that the recoil spring is too strong for your ammo. Best of luck. KFS |
10-18-2009, 07:08 PM | #4 |
Moderator
Lifetime Forum Patron Join Date: Jun 2002
Location: Arizona/Colorado
Posts: 7,768
Thanks: 4,896
Thanked 3,122 Times in 1,433 Posts
|
Another possibility has to do with your grip (believe it or not). Try a good firm grip rather than a relaxed grip and see if this makes any difference. Of course if you are already holding onto it firmly, then disregard this suggestion.
Trying that many mags..it's not your magazines. or ammo. I suspect the firmness of your shooting stance as Ron indicates. The problems you seem to have can result from limp wristed shooting..allowing the pistol to roll backwards in your hand and not giving the toggle enough resistance to operate. Get aggressive with your shooting hold and see if that helps. Jerry Burney
__________________
Jerry Burney 11491 S. Guadalupe Drive Yuma AZ 85367-6182 lugerholsterrepair@earthlink.net 928 342-7583 (CO & AZ) Year Round 719 207-3331 (cell) "For those who Fight For It, Life has a flavor the protected will never know." |
10-18-2009, 08:48 PM | #5 |
User
Join Date: Oct 2009
Posts: 5
Thanks: 0
Thanked 0 Times in 0 Posts
|
Help Needed
Thanks for all the help and advice offered. The problem is not due to limp-wristing. I made a special effort to hold the gun as tightly as possible with both hands and to lock wrists and shoulders. It did not help. Next time at the range I will see if the slide will lock back on the last shot. Also I will push the magazine up hard into the grip with my left palm when firing with both hands to see if that will help. Perhaps the magazine catch is faulty and holding the magazine too low. I ordered a MecGar magazine and will try that as well. If none of that helps I will try replacing the recoil spring with Wolff standard and reduced power springs. If all fails I will have to find another Luger gunsmith. Can anyone suggest someone really good?
|
10-18-2009, 10:20 PM | #6 |
Patron
LugerForum Patron Join Date: Nov 2008
Posts: 4,047
Thanks: 578
Thanked 1,414 Times in 887 Posts
|
Reminds me of a commercial Luger that absolutely gave me fits. I tried everything to get it to feed my cast reloads. Mags, mag springs, main springs, mag. catch, polished feed ramp, one or more trips to the Doc, etc, with a trip to the range in between each "fix". It would function well with Sellor and Beloit ammo, but I'm too cheap to shoot factory loads all the time.
What did I ever do to fix it? Easy. I put an artillery top end on it. Now it will drive tacks and eats everything. Not much help I know, just letting you know that you're not the first to have these problems. DJU |
10-19-2009, 09:12 AM | #7 |
User
Join Date: May 2009
Posts: 69
Thanks: 0
Thanked 2 Times in 2 Posts
|
I had the same problem on my 1914 DWM 30 Luger. The problem was solved with a 17- coil mainspring.
Derek |
10-19-2009, 10:44 AM | #8 |
User
Join Date: Oct 2009
Posts: 5
Thanks: 0
Thanked 0 Times in 0 Posts
|
Help Needed
Derek, did you cut the mainspring to 17 coils or replace it?
My gunsmith recommended 115 grain Winchester White Box so that is what I used. Then I tried NATO 124 grain, which is +p+ and much more powerful. I do not have another Luger to try my magazines, nor do I have another upper. The gun is driving me nuts. It worked better, although not perfectly, before I had it tuned. Now it is very accurate and a pleaseure to shoot, but only one shot at a time. The gunsmith replaced the recoil spring, so maybe that is the problem. Phil |
10-19-2009, 11:31 AM | #9 |
Lifer
Lifetime Forum Patron Join Date: Jun 2002
Location: The Capital of the Free World
Posts: 10,153
Thanks: 3,003
Thanked 2,304 Times in 1,096 Posts
|
It would be helpful if you posted your location so that members and qualified gunsmiths who are near you could be identified. Face to face with your helper would be preferable to mailing it to someone... You can edit your profile and specify the city you live in.
__________________
regards, -John S "...We hold these truths to be self-evident that ALL men are created EQUAL and are endowed by their Creator with certain UNALIENABLE rights, and among these are life, LIBERTY, and the pursuit of happiness..." |
10-19-2009, 11:48 AM | #10 |
Moderator
Lifetime LugerForum Patron Join Date: Oct 2002
Location: Europe
Posts: 5,053
Thanks: 1,036
Thanked 3,987 Times in 1,205 Posts
|
Hi,
Pushing the magazine bottom upwards while shooting usually creates more problems than it solves. Also take a look at the extractor spring. I had a gun that drove me up the wall, not willing to repeat properly. I replaced the little coil spring under the extractor and from that moment onwards it functioned great. The extracted case blocked the feeding of the next round, causing symptomps you describe. |
10-19-2009, 10:14 PM | #11 |
User
Join Date: May 2009
Posts: 69
Thanks: 0
Thanked 2 Times in 2 Posts
|
Phil, I bought the recoil spring as-is from Tom Heller (lugerdoc). The fact that you said sometimes the bullet would lodge in the top of the chamber without going in was the exact same problem I was having.
My Luger originally came with a 21 coil spring. I am now using Fiocchi 93 gr ammo without any problems. Hope this helps. Derek |
10-21-2009, 06:02 PM | #12 |
User
Join Date: Oct 2009
Posts: 5
Thanks: 0
Thanked 0 Times in 0 Posts
|
Help Needed
Hi all,
I am in Fort Lauderdale, Florida. I will check the extractor spring as well as te other suggestions. Phil |
10-22-2009, 04:18 AM | #13 |
User
Join Date: Jan 2003
Location: South Florida
Posts: 789
Thanks: 0
Thanked 84 Times in 34 Posts
|
Phil,
I am in Stuart, and I would be happy to look at your Luger. Send me an e-mail where I can contact you. jamesegg@bellsouth.net
__________________
The "truth" is a matter of Perception |
10-22-2009, 07:16 AM | #14 |
User
Join Date: Apr 2005
Location: Virginia
Posts: 563
Thanks: 1
Thanked 34 Times in 27 Posts
|
Your recoil spring may be too weak, use the paper test on the back of your receiver to check this.
If too weak the toggle will hit the rear of the frame too hard stressing the action this causes the toggle to slam forward too hard, when the bullet hits the ramp it jumps/bounces causing a jam Sometimes the stressing causes the front of the toggle to raise enough to not strip a new cartridge from the magazine. a mag that sits low or a well worn gun makes this more likely to happen. hope this helps-> good luck Vern |
11-06-2009, 02:51 PM | #15 |
User
Join Date: Oct 2009
Posts: 5
Thanks: 0
Thanked 0 Times in 0 Posts
|
Luger Problems
Vern:
Thanks for your suggestions. What is the "paper test" you refer to in your post? Thanks, Phil |
11-16-2009, 10:23 AM | #16 |
Patron
LugerForum Patron Join Date: Jun 2002
Location: POB 398 St.Charles,MO. 63302
Posts: 5,089
Thanks: 6
Thanked 736 Times in 483 Posts
|
Phil, This sound like you need a WEAKER recoil spring. If that's not the problem, I would also check the "S" shaped connector link to your recoil system. If this gets bent, it may not allow full travel of your toggle assy. TH
|
11-16-2009, 02:29 PM | #17 |
Moderator
Lifetime Forum Patron Join Date: Jun 2002
Location: Arizona/Colorado
Posts: 7,768
Thanks: 4,896
Thanked 3,122 Times in 1,433 Posts
|
Tom, I would also check the "S" shaped connector link to your recoil system. If this gets bent, it may not allow full travel of your toggle assy. TH
This part is hardened to a brittle consistancy..Will it bend? Jerry Burney
__________________
Jerry Burney 11491 S. Guadalupe Drive Yuma AZ 85367-6182 lugerholsterrepair@earthlink.net 928 342-7583 (CO & AZ) Year Round 719 207-3331 (cell) "For those who Fight For It, Life has a flavor the protected will never know." |
11-17-2009, 11:25 AM | #18 |
Patron
LugerForum Patron Join Date: Jun 2002
Location: POB 398 St.Charles,MO. 63302
Posts: 5,089
Thanks: 6
Thanked 736 Times in 483 Posts
|
Jerry, I have seen them bend out of shape and have also seen a few PO8s with the shorter M1900 link installed in error. TH
|
|
|