New tool coming! Pre-orders needed!..........

G.T. · 11-24-2003, 05:34 PM

Hi to all! As you all know by now, I have been busy designing tools that I have found necessary for the repair of P.08 mag's.. the mandrel type tool has been a great addition to anyone who has the patients and talent to use it.... I have held on to number #14 for my own use, and it works better then my previous prototype tools, prior to the production model.... I was surprised! Well.... now I have designed a follow-up tool to use in conjuction with the mandrel tool.... It will be a P.08 multi-task type tool, and will be ground and case hardened for extreme hard duty.... it's main function will be to use for the removal and installation of the follower button, but, it will also serve as a holding fixture to be used in conjuction with the mandrel... It will also have several other functions, necessary for mag. repair or assembly...... The reason for my post, is that I would like to get a feel for how many units to produce...The cost will be $155.00 delivered to you... Anyone who has already purchased a mandrel, will have first opportunity to purchase a like numbered fixture.... the remaining sequencial numbered units will be on a "as requested" basis! Let me know if there is any interest out there! Thanks to all for your support! Till...later....GT <img border="0" alt="[jumper]" title="" src="graemlins/jumper.gif" /> <img border="0" alt="[jumper]" title="" src="graemlins/jumper.gif" /> <img border="0" alt="[jumper]" title="" src="graemlins/jumper.gif" />

Ron Wood · 11-24-2003, 05:37 PM

Can't stop with just one tool...gotta have 'em all. Everything about Lugers is addictive.

sambuscemi · 11-24-2003, 08:22 PM

Gerry: I will take one for sure. $155.00 delivered. Let me know when it is ready and I will send check Pronto!!. Please let me know @ sbuscemi1@hotmail.com

sambuscemi · 11-24-2003, 08:22 PM

Gerry: In fact I will send the money in advance if needed?

Heinz · 11-24-2003, 08:37 PM

GT, If Ron and Sam are buying I have got to have one also. Sam is driving the price on dented magazines up at the OGCA show so I am going to have to move into ones that need further repair than just the dent puller ;-)

Luke · 11-24-2003, 10:11 PM

Hello G.T.

Count me in.
I have mandrel #2 and would very much like one of the new tools. Please keep us posted.

Regards,
Luke

G.T. · 11-25-2003, 09:12 AM

Hi to all! I better get busy!! I have you guys all down on the list! Thanks to all of you for your continued support... more by the weekend! Til...lat'r....GT

ken d · 11-25-2003, 06:19 PM

GT:

Count me in too, will take one.

Regards ken d

Luke · 11-26-2003, 06:11 AM

G.T.

Any thoughts about availability date yet?

Luke

Hugh · 11-26-2003, 09:36 AM

G.T. · 11-26-2003, 11:29 AM

Hi Guys! We are doing the prototype over thanksgiving & the weekend... we will run them all the following week... right now we are doing feasibility tests on certain additional functions... we will also have to allow some time for the case hardening, I don't know how long for that.... more info. this weekend, where I will list the finalized list of features and functions of the tool... I've added Ken & Hugh to the list! Thanks guys... til...later.....GT

11-24-2003, 10:11 PM	#6
Luke User Join Date: Jun 2002 Location: NC - USA Posts: 1,239 Thanks: 0 Thanked 18 Times in 6 Posts	Hello G.T. Count me in. I have mandrel #2 and would very much like one of the new tools. Please keep us posted. Regards, Luke __________________ "Peace, if possible; truth, at any cost." . . . Martin Luther

11-26-2003, 06:11 AM	#9
Luke User Join Date: Jun 2002 Location: NC - USA Posts: 1,239 Thanks: 0 Thanked 18 Times in 6 Posts	G.T. Any thoughts about availability date yet? Luke __________________ "Peace, if possible; truth, at any cost." . . . Martin Luther

11-26-2003, 09:36 AM	#10
Hugh RIP Join Date: Jun 2002 Location: Southeast Texas Swamp Posts: 2,460 Thanks: 2 Thanked 165 Times in 64 Posts	<img border="0" alt="[jumper]" title="" src="graemlins/jumper.gif" /> Me too! <img border="0" alt="[jumper]" title="" src="graemlins/jumper.gif" /> Me too! <img border="0" alt="[jumper]" title="" src="graemlins/jumper.gif" /> I want one! <img border="0" alt="[jumper]" title="" src="graemlins/jumper.gif" /> __________________ *TRUMP FOR PREZ IN '20!*

11-24-2003, 05:34 PM	#1
G.T. Lifer Lifetime Forum Patron Join Date: Jun 2002 Location: Chandler Arizona Posts: 3,486 Thanks: 1,284 Thanked 3,583 Times in 989 Posts	New tool coming! Pre-orders needed!.......... Hi to all! As you all know by now, I have been busy designing tools that I have found necessary for the repair of P.08 mag's.. the mandrel type tool has been a great addition to anyone who has the patients and talent to use it.... I have held on to number #14 for my own use, and it works better then my previous prototype tools, prior to the production model.... I was surprised! Well.... now I have designed a follow-up tool to use in conjuction with the mandrel tool.... It will be a P.08 multi-task type tool, and will be ground and case hardened for extreme hard duty.... it's main function will be to use for the removal and installation of the follower button, but, it will also serve as a holding fixture to be used in conjuction with the mandrel... It will also have several other functions, necessary for mag. repair or assembly...... The reason for my post, is that I would like to get a feel for how many units to produce...The cost will be $155.00 delivered to you... Anyone who has already purchased a mandrel, will have first opportunity to purchase a like numbered fixture.... the remaining sequencial numbered units will be on a "as requested" basis! Let me know if there is any interest out there! Thanks to all for your support! Till...later....GT <img border="0" alt="[jumper]" title="" src="graemlins/jumper.gif" /> <img border="0" alt="[jumper]" title="" src="graemlins/jumper.gif" /> <img border="0" alt="[jumper]" title="" src="graemlins/jumper.gif" />

11-24-2003, 05:37 PM	#2
Ron Wood Moderator 2010 LugerForum Patron Join Date: Jun 2002 Location: Santa Teresa New Mexico just outside of the West Texas town of El Paso Posts: 6,988 Thanks: 1,067 Thanked 5,098 Times in 1,676 Posts	Can't stop with just one tool...gotta have 'em all. Everything about Lugers is addictive. __________________ If it's made after 1918...it's a reproduction

11-24-2003, 08:22 PM	#3
sambuscemi User Join Date: Jun 2002 Location: Michigan Posts: 192 Thanks: 0 Thanked 15 Times in 4 Posts	Gerry: I will take one for sure. $155.00 delivered. Let me know when it is ready and I will send check Pronto!!. Please let me know @ sbuscemi1@hotmail.com

11-24-2003, 08:37 PM	#5
Heinz User Join Date: Jun 2002 Location: Greenville SC Posts: 1,004 Thanks: 377 Thanked 410 Times in 180 Posts	GT, If Ron and Sam are buying I have got to have one also. Sam is driving the price on dented magazines up at the OGCA show so I am going to have to move into ones that need further repair than just the dent puller ;-)

11-25-2003, 09:12 AM	#7
G.T. Lifer Lifetime Forum Patron Join Date: Jun 2002 Location: Chandler Arizona Posts: 3,486 Thanks: 1,284 Thanked 3,583 Times in 989 Posts	Hi to all! I better get busy!! I have you guys all down on the list! Thanks to all of you for your continued support... more by the weekend! Til...lat'r....GT

11-25-2003, 06:19 PM	#8
ken d Patron LugerForum Patron Join Date: Jun 2002 Location: louisville ky Posts: 277 Thanks: 31 Thanked 9 Times in 8 Posts	GT: Count me in too, will take one. Regards ken d

11-26-2003, 11:29 AM	#11
G.T. Lifer Lifetime Forum Patron Join Date: Jun 2002 Location: Chandler Arizona Posts: 3,486 Thanks: 1,284 Thanked 3,583 Times in 989 Posts	Hi Guys! We are doing the prototype over thanksgiving & the weekend... we will run them all the following week... right now we are doing feasibility tests on certain additional functions... we will also have to allow some time for the case hardening, I don't know how long for that.... more info. this weekend, where I will list the finalized list of features and functions of the tool... I've added Ken & Hugh to the list! Thanks guys... til...later.....GT