LugerForum Discussion Forums my profile | register | faq | search
upload photo | donate | calendar

Go Back   LugerForum Discussion Forums > General Discussion Forums > Repairs, Restoration & Refinishing

Reply
Thread Tools Display Modes
Unread 01-31-2023, 12:28 PM   #1
Karl
Lifer - Twice Over
Lifetime Forum
Patron
 
Karl's Avatar
 
Join Date: Jun 2002
Location: Savannah
Posts: 512
Thanks: 0
Thanked 237 Times in 109 Posts
Default Ejector Woes

I replaced a broken ejector about a year ago with an aftermarket ejector from Tom Heller. On my last trip to the range, after perhaps 300 rounds, it failed (bent and cracked - see photo). It appears to be a casting. I use the mildest loads that will cycle the action with 115 grain bullets, so I don't think that I overstressed the ejector with a hot load, and I attribute the failure to the inferior quality of the aftermarket product. Given the scarcity of original ejectors, I would prefer to install another aftermarket ejector. In addition to Tom, sources that I am familiar with include Numrich Gun Parts and Jack First Gun Parts. I would be interested to know about experiences that others have had with aftermarket ejectors. Any recommendations?

KFS
Attached Thumbnails
Click image for larger version

Name:	Broken Ejector.jpg
Views:	39
Size:	42.7 KB
ID:	86412  

Karl is offline   Reply With Quote
Unread 01-31-2023, 05:42 PM   #2
tomaustin
Lifer X5
Lifetime Forum
Patron
 
Join Date: Sep 2008
Location: texas
Posts: 708
Thanks: 87
Thanked 522 Times in 201 Posts
Default

what is the cost on the replacement..?
tomaustin is offline   Reply With Quote
The following member says Thank You to tomaustin for your post:
Unread 01-31-2023, 06:33 PM   #3
Karl
Lifer - Twice Over
Lifetime Forum
Patron
 
Karl's Avatar
 
Join Date: Jun 2002
Location: Savannah
Posts: 512
Thanks: 0
Thanked 237 Times in 109 Posts
Default

Tom,

Reproduction ejectors are in the $25. to $50. range. Originals are $75. and up. The big picture is that I foresee a day when originals may not be obtainable and I am seeking the best source for a reproduction. I should clarify that in my post I intended to say that I had fired perhaps 300 rounds since replacing the ejector, not in one day at the range.

KFS
Karl is offline   Reply With Quote
The following member says Thank You to Karl for your post:
Unread 01-31-2023, 11:06 PM   #4
tomaustin
Lifer X5
Lifetime Forum
Patron
 
Join Date: Sep 2008
Location: texas
Posts: 708
Thanks: 87
Thanked 522 Times in 201 Posts
Default

there may be a box in the back of a warehouse way outside of an old production facility......just waiting to be found.

trouble is, original production pushing 100 years, well, it isn't coming with any warranties...

we are stuck with a perpetually diminishing supply chain....

but, the hunt can sure be fun......
tomaustin is offline   Reply With Quote
The following member says Thank You to tomaustin for your post:
Unread 02-01-2023, 10:16 AM   #5
Kiwi
User
 
Kiwi's Avatar
 
Join Date: Mar 2019
Location: Wrong side of the Delaware river
Posts: 279
Thanks: 184
Thanked 394 Times in 154 Posts
Default

Could try Sarco in Easton, Pa
https://www.sarcoinc.com/pistol-parts/luger/

I got a replacement mainspring guide from GT in Az.
GT noted that the 70's guides were cast but the 30's guides were forged and much stronger.
Kiwi is offline   Reply With Quote
Unread 02-01-2023, 11:19 AM   #6
G.T.
Lifer
Lifetime Forum
Patron
 
Join Date: Jun 2002
Location: Chandler Arizona
Posts: 3,483
Thanks: 1,282
Thanked 3,579 Times in 988 Posts
Default I have'em!

Hi Karl, I have original NOS from armours stores. Either Norway or Finland. Look like original Mauser to me? They are exc. quality and work well, I've used several over the past year and they work and last great!
My price is $55.00 including postage first class... Or I'd trade for a nice unmarked original tool?... Let me know at: gctomeks@msn.com
best, til....lat'r....GT...
G.T. is offline   Reply With Quote
The following member says Thank You to G.T. for your post:
Unread 02-01-2023, 12:25 PM   #7
Karl
Lifer - Twice Over
Lifetime Forum
Patron
 
Karl's Avatar
 
Join Date: Jun 2002
Location: Savannah
Posts: 512
Thanks: 0
Thanked 237 Times in 109 Posts
Default

Thanks G. T. I sent an email. I am still interested in knowing about good quality reproductions. Same for extractors. Someday the originals will be gone.

KFS
Karl is offline   Reply With Quote
The following member says Thank You to Karl for your post:
Unread 02-04-2023, 03:00 AM   #8
grantman
User
 
Join Date: May 2019
Location: Northern Idaho
Posts: 79
Thanks: 2
Thanked 34 Times in 22 Posts
Default

Quote:
Originally Posted by Karl View Post
I replaced a broken ejector about a year ago with an aftermarket ejector from Tom Heller. On my last trip to the range, after perhaps 300 rounds, it failed (bent and cracked - see photo). It appears to be a casting. I use the mildest loads that will cycle the action with 115 grain bullets, so I don't think that I overstressed the ejector with a hot load, and I attribute the failure to the inferior quality of the aftermarket product. Given the scarcity of original ejectors, I would prefer to install another aftermarket ejector. In addition to Tom, sources that I am familiar with include Numrich Gun Parts and Jack First Gun Parts. I would be interested to know about experiences that others have had with aftermarket ejectors. Any recommendations?

KFS
Karl: Definitely looks like a casting, but I suspect that the problem is in the heat-treatment of the part. its a Quality assurance issue, but its possible that this failure is very rare. Heat treat problems often happen in batches of parts. Its possible that this maker gets it right most of the time.l
grantman is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 06:46 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright © 1998 - 2023, Lugerforum.com