LugerForum Discussion Forums my profile | register | faq | search
upload photo | donate | calendar

Go Back   LugerForum Discussion Forums > General Discussion Forums > Shooting and Reloading

Reply
Thread Tools Display Modes
Unread 12-21-2020, 08:44 PM   #1
jeb111
Patron
LugerForum
Patron
 
Join Date: May 2018
Location: wyoming
Posts: 277
Thanks: 711
Thanked 331 Times in 133 Posts
Cool 7.65/30 cal dies

As picky as Luger can be with some ammo is it better to use a 3 die set or is a 2die set just as good if I was going to start reloading for the 30 cal Luger?
jeb111 is offline   Reply With Quote
Unread 12-21-2020, 09:53 PM   #2
gunbugs
Lifetime Forum
Patron
 
gunbugs's Avatar
 
Join Date: Sep 2013
Location: Fairbanks, Alaska. Home of the best moose.
Posts: 657
Thanks: 361
Thanked 1,175 Times in 393 Posts
Default

I use a 2 die RCBS set in addition to a LEE factory crimp die. The bugger on 30 Luger, in my experience, is getting enough crimp to keep the bullet from getting pushed back into the case during the feed cycle. The case just doesn't provide enough neck tension to do the job.
gunbugs is offline   Reply With Quote
The following 7 members says Thank You to gunbugs for your post:
Unread 12-22-2020, 02:54 AM   #3
Doubs
User
 
Doubs's Avatar
 
Join Date: Jun 2002
Location: Byron, Georgia
Posts: 1,696
Thanks: 792
Thanked 1,679 Times in 552 Posts
Default

Quote:
Originally Posted by gunbugs View Post
I use a 2 die RCBS set in addition to a LEE factory crimp die. The bugger on 30 Luger, in my experience, is getting enough crimp to keep the bullet from getting pushed back into the case during the feed cycle. The case just doesn't provide enough neck tension to do the job.
Absolutely agree that neck tension is a problem with the .30 Luger. I also use the Lee factory crimp die on .30 Luger and .30 Mauser/.30 Tokarev.
Doubs is offline   Reply With Quote
The following 6 members says Thank You to Doubs for your post:
Unread 12-22-2020, 02:43 PM   #4
jeb111
Patron
LugerForum
Patron
 
Join Date: May 2018
Location: wyoming
Posts: 277
Thanks: 711
Thanked 331 Times in 133 Posts
Default

Thank You very much, just the answer I was looking for!
jeb111 is offline   Reply With Quote
Unread 12-22-2020, 04:23 PM   #5
rhuff
Patron
LugerForum
Patron
 
rhuff's Avatar
 
Join Date: Mar 2011
Location: Az.
Posts: 2,289
Thanks: 2,707
Thanked 971 Times in 716 Posts
Default

I will chime in also. I use the RCBS die set plus the Lee Factory Crimp die in my 30 Luger reloads......lead, and jacketed.
__________________
Need DWM breechblock #21
rhuff is offline   Reply With Quote
The following 2 members says Thank You to rhuff for your post:
Unread 12-22-2020, 05:14 PM   #6
Fla.Mallard
User
 
Fla.Mallard's Avatar
 
Join Date: Jun 2020
Posts: 99
Thanks: 244
Thanked 95 Times in 37 Posts
Default

I use RCBS 2 piece dies and have had absolutely no problems. I shoot 85 gr. Privi bullets with Unique or CFE-P. No real hot loads.
Fla.Mallard is offline   Reply With Quote
The following 2 members says Thank You to Fla.Mallard for your post:
Unread 12-23-2020, 09:58 AM   #7
Kiwi
User
 
Kiwi's Avatar
 
Join Date: Mar 2019
Location: Wrong side of the Delaware river
Posts: 303
Thanks: 213
Thanked 434 Times in 171 Posts
Default

Like Fla Mallard I also use RCBS 2 piece dies with 85 gr. Prvi bullets.
Have used Unique, and SR7625 powders
No problems with bullet slippage.

With the 2 die set it is a little tricky to get the crimp and seating depth set.
But once done set the lock ring and forget - unless you change bullets.
Kiwi is offline   Reply With Quote
Unread 12-24-2020, 02:14 PM   #8
LU1900
User
 
LU1900's Avatar
 
Join Date: Jul 2003
Location: FRANCE
Posts: 907
Thanks: 40
Thanked 468 Times in 196 Posts
Default

I also use the LEE crimp with alls bullets without crimping groove
The LYMAN in three dies for other is enough for me
__________________
Best regards from France...Patrice
https://www.fichier-pdf.fr/2016/03/1...nd-snail-drum/
LU1900 is offline   Reply With Quote
The following 2 members says Thank You to LU1900 for your post:
Unread 02-10-2021, 11:12 PM   #9
Rickybill
User
 
Rickybill's Avatar
 
Join Date: Aug 2018
Posts: 25
Thanks: 0
Thanked 12 Times in 6 Posts
Default

I use RCBS two-die set, for both cannelured and uncannelured, and never had a problem with set-back.
As a separate step, I apply "plenty" of roll crimp on the cannelured bullets, and just iron out the bell, otherwise.
Rickybill is offline   Reply With Quote
The following 2 members says Thank You to Rickybill for your post:
Unread 02-12-2021, 10:26 AM   #10
Major Tom
User
 
Major Tom's Avatar
 
Join Date: Jan 2017
Location: S.E. Iowa
Posts: 484
Thanks: 533
Thanked 227 Times in 124 Posts
Default

I use all Lee dies. The 30 luger die performs exactly as wanted with no problems.
__________________
I Build Custom Pistol Boxes
Major Tom is offline   Reply With Quote
The following 4 members says Thank You to Major Tom for your post:
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 01:31 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright © 1998 - 2024, Lugerforum.com