my profile |
register |
faq |
search upload photo | donate | calendar |
10-06-2020, 12:36 PM | #1 |
User
Join Date: Dec 2013
Location: FL and PA
Posts: 332
Thanks: 276
Thanked 243 Times in 109 Posts
|
Old Model Swiss Commercial #513
I'm the proud new owner of an early Old Model Commercial Luger configured with the Swiss Cross and the serial number 513. This is a relieved frame gun, and in a separate thread I am going to compare/contrast it with my relieved frame Swiss Military Contract #555 and speculate whether #513 started out with an unrelieved frame, or was manufactured with a relieved frame. I think I have good reason to believe the latter, even though there are later unrelieved Swiss Commercials.
This beautiful Luger was purchased from a forum member (not sure if Dennis is an active member of this forum or just the other one). The small parts (toggle pins, front sight blade and grip screws) retain their fire blue finish that is very hard to photograph. The blued finish is so nice, even on the grip straps, that it would lead one to speculate that it may have been "arsenal refinished", but I'm not sure that happened with Commercial guns or not. The markings all look very sharp to me. The DWM stamped on the toggle is light, which is the same with #555 and is typical of the very early guns. In any event, I am very pleased. It came with an Old Model "flaming bomb" magazine that is coveted by some and is I believe proper for this gun, as opposed to the silver button magazines supplied with the military guns. Some pictures...
__________________
My avatars are the Bulgarian word for "Fire", as seen on my 1900, 1906 and 1908 Bulgarian Contract DWM Lugers. Looking for a DWM Commercial side plate #95 |
The following 15 members says Thank You to spacecoast for your post: |
10-06-2020, 01:18 PM | #2 |
User
Join Date: Jun 2002
Location: Byron, Georgia
Posts: 1,694
Thanks: 792
Thanked 1,676 Times in 550 Posts
|
That is indeed a beauty. You have every reason to be proud of it.
|
The following 2 members says Thank You to Doubs for your post: |
10-06-2020, 02:56 PM | #3 |
User
Join Date: Jan 2010
Location: Nampa, Idaho
Posts: 618
Thanks: 818
Thanked 925 Times in 361 Posts
|
Beauty in steel. I would imagine made in the first week of production.
G2 |
The following 3 members says Thank You to gunnertwo for your post: |
10-06-2020, 03:35 PM | #4 | |
User
Join Date: Dec 2013
Location: FL and PA
Posts: 332
Thanks: 276
Thanked 243 Times in 109 Posts
|
Quote:
Of course, there were other contract guns also running in production. G&S project the following timeline by serial number: Q1/1901 - Swiss Military 1-200 and Commercial 1-200 Q2/1901 - Swiss Military 200-400 and Commercial 200-400 Q2-3/1901 - Swiss Military 400-600 and Commercial 400-1000 Q3-4/1901 - Commercial 1000-5000 Q4/1901 - Swiss Military 600-1800 and 597E-610E The 5,000 guns of the initial Swiss Military contract were not finished until 1904 (according to G&S). By the end of 1905, all of the Old Models were completed (30,000 or a little more) - in the first 5 years of production. This would support ~100 per week, but was backloaded to 1902-05 as they got better at it and numbered fewer parts.
__________________
My avatars are the Bulgarian word for "Fire", as seen on my 1900, 1906 and 1908 Bulgarian Contract DWM Lugers. Looking for a DWM Commercial side plate #95 |
|
10-06-2020, 11:35 PM | #5 |
User
Join Date: Jan 2010
Location: Nampa, Idaho
Posts: 618
Thanks: 818
Thanked 925 Times in 361 Posts
|
Well, if it's the first week or first month, a fabulous gun.
G2 |
The following 2 members says Thank You to gunnertwo for your post: |
10-06-2020, 11:58 PM | #6 |
Twice a Lifer
Lifetime Forum Patron Join Date: Mar 2011
Location: Atop the highest hill in Schuyler County NY
Posts: 3,327
Thanks: 7,216
Thanked 2,544 Times in 1,352 Posts
|
A gorgeous Luger!
__________________
"... Liberty is the seed and soil, the air and light, the dew and rain of progress, love and joy."-- Robert Greene Ingersoll 1894 |
The following member says Thank You to ithacaartist for your post: |
10-07-2020, 11:05 AM | #7 |
Moderator
2010 LugerForum Patron Join Date: Jun 2002
Location: Santa Teresa New Mexico just outside of the West Texas town of El Paso
Posts: 7,010
Thanks: 1,088
Thanked 5,149 Times in 1,694 Posts
|
That is the way we like them, and a scarce Commercial to boot...good going! I suspect there is a decent possibility that it was originally unrelieved as I think that might be right around the serial number range where the transition took place but unfortunately don't have any concrete evidence. I suspect you have already seen the frame comparison photo that I did quite some time ago. I look forward to hearing about your "compare/contrast" analysis.
Ron
__________________
If it's made after 1918...it's a reproduction |
The following 7 members says Thank You to Ron Wood for your post: |
10-07-2020, 12:05 PM | #8 |
User
Join Date: Dec 2013
Location: FL and PA
Posts: 332
Thanks: 276
Thanked 243 Times in 109 Posts
|
Thanks Ron, I posted a thread on the other forum last night showing some pictures of my frame(s) and speculating that this commercial may have been manufactured with a relieved frame - although there are unrelieved commercials with later numbers.
Do you think it was a hard or soft cutover... I can't see why they would have been doing it both ways, unless they somehow got out of serial order during manufacturing and it just looks that way.
__________________
My avatars are the Bulgarian word for "Fire", as seen on my 1900, 1906 and 1908 Bulgarian Contract DWM Lugers. Looking for a DWM Commercial side plate #95 |
10-07-2020, 12:28 PM | #9 |
User
Join Date: Feb 2013
Location: Somewhere in Northern Italy
Posts: 2,646
Thanks: 1,082
Thanked 1,783 Times in 1,007 Posts
|
Congratulations, a gorgeous example, looks like the one I owned.
Mine was s/n 763 with a low button too.
__________________
"Originality can't be restored and should be at the top of any collector's priority list. |
The following 3 members says Thank You to Sergio Natali for your post: |
10-07-2020, 02:20 PM | #10 |
User
Join Date: Dec 2013
Location: FL and PA
Posts: 332
Thanks: 276
Thanked 243 Times in 109 Posts
|
Thanks Sergio, I will add yours to the "unrelieved frame" list. That is a beautiful example as well.
Oops... never mind... it's already there. Mark
__________________
My avatars are the Bulgarian word for "Fire", as seen on my 1900, 1906 and 1908 Bulgarian Contract DWM Lugers. Looking for a DWM Commercial side plate #95 |
10-08-2020, 05:34 PM | #11 | |
User
Join Date: Jun 2002
Location: Portland, Oregon
Posts: 3,894
Thanks: 0
Thanked 1,288 Times in 426 Posts
|
Quote:
A systematic production timeline is much less cut-and-dried. The Parabellum was accepted by the Swiss on May 4 1900, and the production order was confirmed in August 1900. This is the absolute start date of any possible Pistole Parabellum production. According to Sturgess’s documentation production pistols were inspected (with some rejects) between Feb. 1901 and the first 600 pistol delivery in June 1901, but his presentation is too confused to tease out an actual production sequence. Estimates of a starting date or early production numbers of commercial Parabellums must be purely conjectural. What can be said, is that between the beginning of commercial production and October 1901 there were at least 6,167 produced. Sn 6167 is the lowest documented Bannerman test eagle serial number; these pistols were delivered on Oct. 26, 1901. The U.S. test delivery was split into two parts—correspondence between DWM’s agent Hans Tauscher and the U.S. Army indicates the second shipment had to wait until pistol production was completed. Although Old Model production carries on through Bulgrian, carbine, and short-frame pistols, there are no actual associated production dates on record. Even the short frame test pistols and Powell cartridge-counters are known by delivery or test year rather than actual production. The end of Old Model production can most likely be dated to late 1904. Sturgess asserts the French transitional and the navy P04 carry trials pistols (both Old Model frame types) to be concurrent production; the navy pistols were ready for trials by August, 1904. The highest Old Model serial numbers reported are a carbine sn 25032 and a French transitional sn 25035. The first delivery of the new model production navy P04 was March 1906; New Model commercial production could not have occurred before that, and commercial production carried on with the earliest reported sn 25056. Therefore, DWM underwent a 19 month production hiatus after August , 1904. It is true that DWM provided pistols for various military trials after that date, but these had already been manufactured, and perhaps modified for the purpose. I wouldn’t go so far as to estimate a production number per week, there are too many possible variables. “…backloaded to 1902-05 as they got better at it and numbered fewer parts…” I don’t understand your meaning here. And what parts did they stop numbering? --Dwight |
|
10-09-2020, 05:57 AM | #12 | |
User
Join Date: Jul 2011
Location: Botetourt County, Virginia
Posts: 120
Thanks: 93
Thanked 140 Times in 46 Posts
|
Quote:
I'm sure this is accurate for the most part, and I genuinely appreciate Dwight's deep knowledge of production serial numbers and delivery dates. We all benefit when Dwight shares his knowledge and research. But let's not forget the last short run of carbines in the 50000 to 50100 s/n block. These were produced/assembled at a much later date than 1904. As such, they are the very last production run of old models, and they bear the highest serial numbers. I know these are outliers, but they exist. I'm bold enough to say that my carbine (the carbine of which I now am the custodian), s/n 50100, is nominally the last carbine, but also nominally the last old model Parabellum produced. http://forum.lugerforum.com/showthread.php?t=38690 Fascinating facts. That's why they hold the interest of collectors. Curl P.S. My carbine is a Swiss, so it's very much at home in the Swiss Lugers forum! Last edited by CptCurl; 10-09-2020 at 06:21 AM. Reason: Added photo. |
|
The following 3 members says Thank You to CptCurl for your post: |
10-09-2020, 07:55 AM | #13 |
User
Join Date: Jun 2002
Location: Portland, Oregon
Posts: 3,894
Thanks: 0
Thanked 1,288 Times in 426 Posts
|
Roscoe,
Thanks for your comments and thank you very much for the reminder of the excellent earlier discussion. --Dwight |
The following member says Thank You to Dwight Gruber for your post: |
Thread Tools | |
Display Modes | |
|
|