my profile |
register |
faq |
search upload photo | donate | calendar |
09-16-2019, 07:20 PM | #1 |
New User
Join Date: Sep 2019
Posts: 3
Thanks: 0
Thanked 5 Times in 2 Posts
|
Russian capture with Simson Toggle
Hello everyone! I finally got my first Luger and I've already got a few questions about it!
1. The side plate has been force matched to read 31 and the take down lever is hard to read (I'll just assume it's not matching). But every other I've looked at besides the grips match with the number 31. This a pretty low serial number so I was wondering if all the 31 stamps are a German font or a Russian font? It would seem odd that they would force match a 31 on the side plate if they've stamped 31 everywhere else and to match so many pieces us pretty rare for Russian captures. 2. The toggle is a Simson but is every other piece Mauser? I'm guessing so due to the 42 stamps and Eagle 63. The toggle number matches the frame though so I'm not sure how that worked. Any help would be appreciated! I know Russian captures aren't that collectable and they did a lot of work on what they captured but I'm really curious to hear what you all think. Thank you so much! |
09-16-2019, 07:41 PM | #2 |
Super Moderator
Eternal Lifer LugerForum Patron Join Date: Jun 2002
Location: North of Spokane, WA
Posts: 15,935
Thanks: 2,034
Thanked 4,533 Times in 2,093 Posts
|
Most folks, myself included will see the 'x' and think of it as a 'russian capture' - some recent information seems to show that it is not always true. The force matching I associate more with an east german gun that was then used in service. Making sure the part worked then renumbering is how I beleive.
The toggle was likely blank or perhaps it happened to be a #31. The frame appears to have the 'Mauser' hump or bump, which would show that it was a mauser to start with and then it was reused / rebuilt when needed. The low serial number can just be a coincidence, as tens of thousands were made each year and they started over (2nd batch of 10,000 would have a suffix letter). Or perhaps the front of the frame and side were renumbered. Ed |
09-16-2019, 09:01 PM | #3 |
User
Join Date: Feb 2018
Location: South Carolina
Posts: 848
Thanks: 784
Thanked 861 Times in 411 Posts
|
Not just that, this one is all kinds of mixmaster force matched. I am pretty sure the right side of the upper is an Erfurt stamp, corroborated by the 1918 chamber date and Artillery cut. There are all kinds of mixed stamps on the gun, even in the same parts (like the barrel). Not sure if that side plate renumbering was scratched with a sharp tool or electropenciled on there. I would agree that it is more of an East German rework than a Russian capture gun. Shoot the crap out of it and let us know how it functions! Congrats on picking up your first Luger (they get a little addictive).
__________________
-QM Looking for Mauser S/42 toggle train #22 |
09-16-2019, 09:46 PM | #4 |
User
Join Date: Jun 2002
Location: Byron, Georgia
Posts: 1,700
Thanks: 792
Thanked 1,694 Times in 556 Posts
|
That is one of the more interesting mixmaster Lugers that I've ever seen. As stated, the receiver appears to be Erfurt while the frame is Mauser.
What's intriguing to me is that the barrel proof marks (E/N & E/J) and the two E/N stamps on the right side of the receiver and frame are IAW the 1939 proof laws indicating that it may have been pieced together during the war. The E/63 on the barrel also supports that idea. The E/N & E/J proofs were only used - AFAIK - on commercial guns and were not military proofs. The E/J is for proof after repairs; in this case, likely the replacement barrel. The extractor finish is rather crude and I think Simpson did repairs which MIGHT explain the toggle train. Does the "X" indicate Russian capture? Who knows? If it was owned by a civilian, it may have been confiscated and put together with military guns. Unfortunately, there's no way on earth to know exactly how that mix of parts came together or when. |
09-16-2019, 11:38 PM | #5 |
User
Join Date: Apr 2015
Location: near Charlotte NC
Posts: 4,681
Thanks: 1,442
Thanked 4,350 Times in 2,040 Posts
|
I believe the e/n and e/j were also used in East Germany post war.
update- E/n and E/u; thanks Dwight, one should always check before remembering.
__________________
03man(Don Voigt); Luger student and collector. Looking for DWM side plate: 69 ; Dreyse 1907 pistol K.S. Gendarmerie |
The following member says Thank You to DonVoigt for your post: |
09-16-2019, 11:56 PM | #6 |
User
Join Date: Jun 2002
Location: Portland, Oregon
Posts: 3,902
Thanks: 0
Thanked 1,318 Times in 431 Posts
|
The e/N and e/J are specifically 1939. East Germany (Suhl) used c/N and c/U for proof, the final proof eagles are different birds.
The latest information on the X is that it is an East German export mark. --Dwight |
09-17-2019, 06:48 AM | #7 |
Moderator
Lifetime LugerForum Patron Join Date: Oct 2002
Location: Europe
Posts: 5,053
Thanks: 1,036
Thanked 3,989 Times in 1,205 Posts
|
So why do so many East German Lugers don't have the X? And why do lugers found in Ukrainian storage, exported after the collapse of the Soviet Union also have the X?
I don't know who came up with that idea, but it is the least likely explanation I have heard up till now. The simplest explanation is that, like the 1920 marking, it is a property mark that prevents civilians and soldiers for turning in (and getting paid) the same guns multiple times. |
The following 4 members says Thank You to Vlim for your post: |
09-17-2019, 10:23 AM | #8 |
New User
Join Date: Sep 2019
Posts: 3
Thanks: 0
Thanked 5 Times in 2 Posts
|
Thank you all so much for your input!!! I deeply appreciate this and I wish that mix masters were just as easy to decipher as an authentic all matching haha! I will definitely post an update on how it shoots. I've cleaned it all and it appears to look fine!
It's almost comical to me that this is an almost all matching gun but technically not actually "matching" since the pieces came from different manufacturers and time periods. If only each part could talk and tell us what exactly happened to this Luger! |
09-17-2019, 10:14 PM | #9 |
User
Join Date: Jun 2002
Location: Portland, Oregon
Posts: 3,902
Thanks: 0
Thanked 1,318 Times in 431 Posts
|
Quite correct that I mis-remembered this discussion https://luger.gunboards.com/showthre...ussian+capture .
--Dwight |
The following member says Thank You to Dwight Gruber for your post: |
09-19-2019, 08:13 AM | #10 | |
User
Join Date: Jun 2002
Posts: 757
Thanks: 0
Thanked 212 Times in 101 Posts
|
Quote:
<rant> Back when I was a young Luger collector the term "matched" or "matching" was verbal shorthand for "all factory original". That meant no replaced part - the gun was just as it initially came from the factory. If it wasn't all original it was a shooter. Part swapping to create a Luger that had the appearance of being factory original was viewed as a fraudulent action, that created a fake Luger. The rise in part swapping to create a Luger that appears to be all original is the major reason I gave up collecting Lugers (other than "shooter" Lugers). That "all original" extended to markings. If a Luger was unit marked it wasn't factory original and was a shooter. Things change. Part swapping has become a common practice. People even advertise for specific parts with specific numbers. The market demand for Lugers is orders of magnitude above what it was circa 1960, as is our general standard of living. Small wonder people pay collector grade prices for what I still regard as shooter grade Lugers. </rant> To each his own... |
|
09-19-2019, 10:26 AM | #11 |
User
Join Date: Apr 2015
Location: near Charlotte NC
Posts: 4,681
Thanks: 1,442
Thanked 4,350 Times in 2,040 Posts
|
What Kyrie said, +1 !
And I'd add that a "restoration" no matter how good is right up there with "faking" - IF it is not marked to show the pistol is refinished/restored. This especially applies to "re-engraved or restored" markings. JMHO.
__________________
03man(Don Voigt); Luger student and collector. Looking for DWM side plate: 69 ; Dreyse 1907 pistol K.S. Gendarmerie |
The following member says Thank You to DonVoigt for your post: |
09-19-2019, 12:01 PM | #12 |
New User
Join Date: Sep 2019
Posts: 3
Thanks: 0
Thanked 5 Times in 2 Posts
|
Hey Kyrie you made some very valid points so I don't consider what you said a "rant" in fact that was something that was on my mind when looking at Lugers! If you go that far out of your way to make your luger matching, what if ends being not very shootable?
I'll admit it's tough not being able to say my specific Luger was issued to a WWI or WWII German soldier as is, but nonetheless it has history and I can shoot it without worrying about value too much. Plus, since these are no longer in production, it's still kinda rare in its own way right? |
03-04-2020, 02:09 PM | #13 | |
User
Join Date: Feb 2020
Posts: 36
Thanks: 10
Thanked 40 Times in 12 Posts
|
Quote:
I did not realize that any mis-matched parts makes a Luger a "shooter". But I guess I'd rather have a mis-matched Luger that shoots than a collector version that doesn't. |
|
03-04-2020, 03:00 PM | #14 |
Super Moderator - Patron
LugerForum Life Patron Join Date: Dec 2009
Location: Eastern North Carolina, USA
Posts: 3,909
Thanks: 1,374
Thanked 3,110 Times in 1,510 Posts
|
These old threads do rise, like zombies, from the dead, don't they?
You'd probably benefit from a copy of our forum's FAQ document. Just follow the FAQ links at the top of every page. It's full of useful reference information. To be clear, collectors most highly value a Luger that is as close as possible to the state it was in when it left the factory. It's all downhill from there. Occasional rare Lugers still retain collector interest after parts have been swapped or the gun is restored. A pristing Russian Capture as it left the rework arsenal may be of interest too. Once they have been dipped, and parts swapped they end up shooters if they function properly. You Luger has parts from every era. Imperial (the receiver) Weimar (at least the toggle) and WW-II (the Mauser frame). A word of caution. It has been renumbered, and the legal serial number on the frame has been changed. Ensure that you keep the transfer paperwork that proves you received it that way. The ATF doesn't like altered legal serial numbers.
__________________
Igitur si vis pacem, para bellum - - Therefore if you want peace, prepare for war. |
03-04-2020, 03:24 PM | #15 | |
User
Join Date: Feb 2020
Posts: 36
Thanks: 10
Thanked 40 Times in 12 Posts
|
Quote:
As far as zombie threads go, I've brought such 'necro threads' back from ten years so six months seems like nothing . |
|
03-04-2020, 03:31 PM | #16 | |
User
Join Date: Jun 2002
Location: Byron, Georgia
Posts: 1,700
Thanks: 792
Thanked 1,694 Times in 556 Posts
|
Quote:
The subject Luger is a real "FrankenLuger" in that it has an Imperial receiver, WW2 era Mauser frame and numerous mixed parts. Dwight is correct that the E/N and E/J are IAW the 1939 proof laws and the Luger went through a rework sometime in 1939 or later during the Nazi era. The E/N is a nitro proof and the E/J appears on guns that were repaired. Below are images of a Nazi era commercial rework that I've owned for years. It is a long frame Navy pistol mated to an upper and re-barreled to .30 caliber. The work was done by "Franken und Lunenschloss" of Suhl. Note the same E/N and E/J proofs. |
|
03-04-2020, 06:29 PM | #17 | |
User
Join Date: Feb 2020
Posts: 36
Thanks: 10
Thanked 40 Times in 12 Posts
|
Quote:
|
|
03-09-2020, 10:43 PM | #18 |
User
Join Date: Jan 2008
Location: Lakeland, Fl.
Posts: 514
Thanks: 349
Thanked 101 Times in 52 Posts
|
Shooter, well not to me. I bough a 1906 Navy from a well know collector here just before he passed away.. The 1906 Navy is completely matching except for the correct Navy toggle train, just a few numbers off. Maybe as a collectable, it would not be considered as such, and looked upon as a shooter. But this is one 1906 Navy I'll never shoot.. I had Don Voight build me a FrankenLuger 6" Navy with Navy sights. Looks great, shoots even better. I've always wondered if a older or desirable Luger that would if all matching would sell in the $5,000 range, were to have one mismatched part, say sideplate, were would that fall in the world of collectability? Would finding a correctly numbered sideplate bring to back to matching, even though the same number sideplate was not original to the Luger? Sitting here with a cup of tea catching up on the post.
|
The following member says Thank You to Jasta2 for your post: |
03-10-2020, 08:54 AM | #19 |
User
Join Date: Apr 2015
Location: near Charlotte NC
Posts: 4,681
Thanks: 1,442
Thanked 4,350 Times in 2,040 Posts
|
Jasta,
My 1914 DWM Artillery luger is matching except for the side plate, as far as I'm concerned, it is certainly collectible! A "matching example" sells for $6k to $10k, so this one must be worth a little more than a $1200 shooter artillery; I surely hope so! JMHO. I have a one part mismatched 1906 Navy also, bought from a Navy guy here; it must be worth more than a shooter, but less than a "full match"- cause I paid somewhere in between for it! A mismatched part does not "automatically" make a luger a shooter(unless you want it to), again JMHO.
__________________
03man(Don Voigt); Luger student and collector. Looking for DWM side plate: 69 ; Dreyse 1907 pistol K.S. Gendarmerie |
The following member says Thank You to DonVoigt for your post: |
03-10-2020, 10:14 AM | #20 |
User
Join Date: Feb 2020
Posts: 36
Thanks: 10
Thanked 40 Times in 12 Posts
|
With any new area of collecting, I've found that I had to go through a learning period, which involved 'thinking' I had done enough research and knew what I was about to do, followed by getting a great deal on something that I later learn from the more experienced collectors that it wasn't actually quite what I thought it was.
The good thing is that the first one is always special, and if you keep it, the mistakes don't hurt all that much. I went through the same exact thing with my first vintage S&W (1955 .357) and my first vintage Colt (1954 3-5-7). |
Tags |
matching, russian capture, simson |
Thread Tools | |
Display Modes | |
|
|