my profile |
register |
faq |
search upload photo | donate | calendar |
06-28-2020, 02:11 PM | #1 |
User
Join Date: Jun 2020
Posts: 10
Thanks: 0
Thanked 17 Times in 8 Posts
|
I guess I'm a collector now...
Hello! Long story short, always wanted a Luger, got talked into a Swiss 1924 some years ago, and haven't regretted it a bit. Yesterday we had a mis-marked 1929 military model come up at auction, and it wasn't bid very high. No interest, so I bid.. mine. It's interesting in a few ways, but probablly nothing really super special.
There is a very faint import mark on the r/h side of the frame, sadly. Interesting that there is no serial number on the rear toggle link, but I understand that's not uncommon, if the part was replaced. There is also no serial number on the barrel. The proof is there, but no s/n... I couldn't find any reference to this mark other than here... my '24 dosen't have it I can't make out the mark on the left, it's a proof, obviously, but which one I can't tell I see the E25 in more than a few places with the cross I did find a "P" stamped on the Frame, I think, but no dates after. Hopefully I can get down to the back of the lot and put some rounds through it this afternoon.. |
The following 8 members says Thank You to a65l for your post: |
06-28-2020, 04:02 PM | #2 |
Moderator
Lifetime LugerForum Patron Join Date: Oct 2002
Location: Europe
Posts: 5,053
Thanks: 1,036
Thanked 3,989 Times in 1,205 Posts
|
Nice gun.
All parts have the subcobtractor and steel type marked when needed. The marking on the left bottom of the receiver is that of SIG in Neunhausen, who manufactured the receiver The marking on the frame rear is that of Waffenfabrik Bern. The frame was also made by SIG, you will find their marking in the rear frame well also. |
The following 6 members says Thank You to Vlim for your post: |
06-28-2020, 04:26 PM | #3 |
Lifer
Lifetime Forum Patron Join Date: Apr 2015
Location: Austin, Texas
Posts: 734
Thanks: 2,101
Thanked 613 Times in 330 Posts
|
nice pictures, BTW !
|
The following member says Thank You to Mac Cat for your post: |
06-28-2020, 05:07 PM | #4 |
User
Join Date: Jun 2020
Posts: 10
Thanks: 0
Thanked 17 Times in 8 Posts
|
Thanks! I wonder about the barrel not having a serial number, is that an indication that it was replaced at some point, or did some get out with no sn?
|
The following member says Thank You to a65l for your post: |
06-28-2020, 05:15 PM | #5 |
Moderator
Lifetime LugerForum Patron Join Date: Oct 2002
Location: Europe
Posts: 5,053
Thanks: 1,036
Thanked 3,989 Times in 1,205 Posts
|
I think the gun saw some repairs after being privatized.
It seems that whoever took ownership after military service kept the pistol and used it well. |
The following member says Thank You to Vlim for your post: |
06-28-2020, 05:28 PM | #6 |
User
Join Date: Jun 2020
Posts: 10
Thanks: 0
Thanked 17 Times in 8 Posts
|
I thought I saw a P somewhere, but not in any of the usual places. I ran some rounds through it, so it will get cleaned here tonight or tomorrow and I'll look again.
|
The following member says Thank You to a65l for your post: |
06-28-2020, 10:14 PM | #7 |
User
Join Date: Jun 2020
Posts: 99
Thanks: 244
Thanked 95 Times in 37 Posts
|
"There is a very faint import mark on the r/h side of the frame, sadly."
Newbie question: How much does an import engraving/stamp devalue a pistol? |
06-28-2020, 10:46 PM | #8 |
Twice a Lifer
Lifetime Forum Patron Join Date: Mar 2011
Location: Atop the highest hill in Schuyler County NY
Posts: 3,348
Thanks: 7,295
Thanked 2,579 Times in 1,366 Posts
|
It depends on whom you ask. Some collectors eschew import marks as unoriginal. Others consider it part of a pistol's history/provenance. Overall, it doesn't kill a pistol's value "bigly" but some would pay more for the same gun without one.
__________________
"... Liberty is the seed and soil, the air and light, the dew and rain of progress, love and joy."-- Robert Greene Ingersoll 1894 |
The following 5 members says Thank You to ithacaartist for your post: |
06-29-2020, 08:15 AM | #9 |
User
Join Date: Jun 2020
Posts: 10
Thanks: 0
Thanked 17 Times in 8 Posts
|
I only comment on the import mark as its one of the more subtle ones I've seen, and it's in an inconspicous place. As opposed to, say, my CZ 52 where's its etched across the side of the slide in leters as big as they could get it.
|
The following member says Thank You to a65l for your post: |
06-29-2020, 08:31 AM | #10 |
User
Join Date: Jul 2011
Location: Botetourt County, Virginia
Posts: 120
Thanks: 93
Thanked 140 Times in 46 Posts
|
Nice pistol! Yep, you are a collector.
How did it shoot? Curl |
The following member says Thank You to CptCurl for your post: |
06-29-2020, 09:50 AM | #11 |
User
Join Date: Jun 2020
Posts: 10
Thanks: 0
Thanked 17 Times in 8 Posts
|
Hand held off the bench at ~25 yards or so, PPU factory ammo. My disclamer here is that I'm going through a bout of Bells Palsy, and it's my shootin' eye that's affected. Full of ointment and eyedrops most of the time, so my hold may not have been all that consistent. Ran about 50 rounds through it, no malfunctions, no issues, like a fine swiss watch.
This is a 6'o clock hold, seems a little high for my tastes but.... |
The following member says Thank You to a65l for your post: |
06-29-2020, 10:05 AM | #12 |
Super Moderator - Patron
LugerForum Life Patron Join Date: Dec 2009
Location: Eastern North Carolina, USA
Posts: 3,909
Thanks: 1,374
Thanked 3,110 Times in 1,510 Posts
|
Many of these were reworked as part of being decommissioned (a Bern rework was offered to the officers when they were retiring). The replacement parts may have been installed at that time.
I wouldn't consider it "mismatched" as the work was likely arsenal work, and rework of Swiss lugers by the arsenal is quite normal. The 699xx serial number is a rather high one. I don't have my books here; what is the date on the frame in front of the slide lock? These high precision Lugers are excellent.
__________________
Igitur si vis pacem, para bellum - - Therefore if you want peace, prepare for war. |
06-29-2020, 10:32 AM | #13 |
User
Join Date: Jun 2020
Posts: 10
Thanks: 0
Thanked 17 Times in 8 Posts
|
|
The following 2 members says Thank You to a65l for your post: |
06-29-2020, 11:05 AM | #14 |
Super Moderator - Patron
LugerForum Life Patron Join Date: Dec 2009
Location: Eastern North Carolina, USA
Posts: 3,909
Thanks: 1,374
Thanked 3,110 Times in 1,510 Posts
|
So, made in 1943. The month is probably stamped to the left of the 4 in the shadow.
__________________
Igitur si vis pacem, para bellum - - Therefore if you want peace, prepare for war. |
06-29-2020, 11:13 AM | #15 |
User
Join Date: Jun 2020
Posts: 10
Thanks: 0
Thanked 17 Times in 8 Posts
|
I don't see anything there.. looked very carefully with flashlight and magnifer... The only other thing I see is that script looking "3"? between the 4 and the 3. Might not even be a number..
|
06-29-2020, 12:01 PM | #16 |
User
Join Date: Jan 2019
Location: Pa.
Posts: 157
Thanks: 535
Thanked 338 Times in 90 Posts
|
Nice
Real nice pistol and great photos Thanks
|
06-29-2020, 12:21 PM | #17 | |
User
Join Date: Jun 2002
Location: Byron, Georgia
Posts: 1,700
Thanks: 792
Thanked 1,696 Times in 556 Posts
|
Quote:
50 rounds without a problem is great. You have a good one that will give you a lot of pleasure. |
|
The following member says Thank You to Doubs for your post: |
06-29-2020, 12:40 PM | #18 |
User
Join Date: Jun 2020
Posts: 99
Thanks: 244
Thanked 95 Times in 37 Posts
|
|
The following member says Thank You to Fla.Mallard for your post: |
06-29-2020, 01:55 PM | #20 |
User
Join Date: Feb 2015
Location: Switzerland
Posts: 63
Thanks: 1
Thanked 45 Times in 23 Posts
|
1943 seems correct for the serial number. Not all the '29 had the month stamped.
Yes at the time pistols in Switzerland were zeroed for 50m |
The following 3 members says Thank You to flydive for your post: |
Thread Tools | |
Display Modes | |
|
|