LugerForum Discussion Forums my profile | register | faq | search
upload photo | donate | calendar

Go Back   LugerForum Discussion Forums > Research Archives > Early Lugers (1900-1906)

 
Thread Tools Display Modes
Unread 11-05-2005, 12:07 AM   #1
Dwight Gruber
User
 
Join Date: Jun 2002
Location: Portland, Oregon
Posts: 3,902
Thanks: 0
Thanked 1,318 Times in 431 Posts
Default Luger "Reinforced" Frame

A recent comment about reinforced Luger frames got me to thinking about a photo comparison I made awhile ago, and wondering if it related.

John Walter, in "The Luger Book" (1986, p.117, 217) and "Luger" (1977, p.209) asserts that Erfurt machined their P-08 frames with a steel reinforcement spur protruding into the recoil spring well under the spring guide, and that in 1915 DWM added this feature to their P-08 production as well.

Walter illustrates the difference, seen here scanned from "Luger"--unreinforced to the left, reinforced to the right (his frame illustration in "The Luger Book" is hopeless, and doesn't even show this feature).



Walter is in error in this regard.

The illustration below shows the evolution of the Luger frame from the 1906 model through the 1914 model. It is clear to see that the "reinforcing" piece is actually present on the 1906 Luger frame, and is associated with the tab which holds the holds the grip safety and grip safety spring. The P-08, in this case a Commercial, retains the metal spur, although the grip safety tab is no longer present. By 1917 the metal spur is gone, and the recoil spring well is faced off with a straight cut.

It is reasonable to assume that, at some time during Luger production, this metal spur was omitted in order to eliminate a machining step or two, with the added benefit of reducing the gun's weight by a couple of ounces.



In the course of research a number of Imperial Military Lugers were examined to see if they exhibited this feature, and to determine, if possible, when the frame whas changed. Subject guns included:

DWM
1908, four guns: two ns and two a suffix
1910: c suffix
1911, two guns: e suffix
1912, two guns: ns
1913: a suffix
1914: ns
1915, three guns: two c suffix, one d suffix
1916, three guns: two i suffix, one o suffix
1917, four guns: one b suffix, two LP08 g and k suffix, one Navy ns
Safe/Loaded Commercial
Alphabet Commercial, u suffix

Erfurt
1911, two guns: ns
1912, two guns: ns
1913: ns
1914: a suffix
1917: h suffix
1917/18: s suffix

The DWM guns through 1914 all had the spur in the recoil spring well. The 1915 guns and onward were all straight frame.

The 1911 Erfurts had the spur, 1912 and onward were straight frame.

Call For Data

Jan Still (correspondence) has established that the change in DWM production occurred between Lugers 1914 serial# 468, and 1915 serial# 3220c. Erfurt production chanaged between Lugers 1911# 7638 and 1912 serial# 454.

I am going to start another database, to try to refine the year and serial# of the changeover point. Anyone owning Lugers between those dates and numbers, please check your frames for the presence or absence of the recoil well spur. As always, post your information here, or email me dwightg@pacifier.com

It would also be useful to know where this changeover occurred in Commercial production, as it would help establish a production date in corrrelation with the military data. Owners of P-08 Commercials, 1914 Commercials, and the Army and Navy variations of those models, after serial# 46161, please report your guns' characteristics in this regard as well.

This has been an interesting discovery, and I thank everybody in advance for their information.

--Dwight
Dwight Gruber is offline  
The following member says Thank You to Dwight Gruber for your post:
Unread 11-05-2005, 12:53 AM   #2
wlyon
Lifer 2X
Lifetime Forum
Patron
 
wlyon's Avatar
 
Join Date: May 2005
Location: Somewhere in Montana
Posts: 2,637
Thanks: 3,175
Thanked 2,564 Times in 956 Posts
Default

Dwight, 1914 Commercial 72353, straight cut. 1914 1839 spur.
__________________
Bill Lyon
wlyon is offline  
Unread 11-05-2005, 01:02 AM   #3
Dwight Gruber
User
 
Join Date: Jun 2002
Location: Portland, Oregon
Posts: 3,902
Thanks: 0
Thanked 1,318 Times in 431 Posts
Default

Quick-draw Bill,

Thanks much.

--Dwight
Dwight Gruber is offline  
Unread 11-05-2005, 04:39 AM   #4
Vlim
Moderator
Lifetime
LugerForum Patron
 
Vlim's Avatar
 
Join Date: Oct 2002
Location: Europe
Posts: 5,053
Thanks: 1,036
Thanked 3,989 Times in 1,205 Posts
Default

Dwight:

1913, Dutch contract #2850 has the old style, as expected.
Vlim is offline  
Unread 11-05-2005, 07:26 AM   #5
mauro
FIREARM HISTORIAN AND AUT
 
mauro's Avatar
 
Join Date: Jun 2002
Location: Belgium
Posts: 1,535
Thanks: 106
Thanked 349 Times in 129 Posts
Default

Hello Gents,
Please find hereafter an interesting photo discussed at page 43 of my book: "The Luger Artillery".
As already highlighted the grip of P08 was standardized starting from August 1913 including a stock lug. The internal area of the grips towards the bottom of the recoil spring changed. From right to left: a P08 made before 1913; a transitional model with the stock lug and internal working unchanged ; the final frame configuration.
Should be interesting to add to your research also the transitional model to figure out the serial number range where this model falls.

Mauro

__________________
Mauro Baudino - www.lugerlp08.com www.paul-mauser-archive.com
Mauser Company and Firearm Historian - Mauser Parabellum Certification Service.
mauro is offline  
Unread 11-05-2005, 08:01 PM   #6
Heinz
User
 
Heinz's Avatar
 
Join Date: Jun 2002
Location: Greenville SC
Posts: 1,004
Thanks: 377
Thanked 410 Times in 180 Posts
Default

Dwight, 1915 DWM; 8413b straight frame
Heinz is offline  
Unread 11-06-2005, 02:50 AM   #7
Steve Richards
User
 
Join Date: Jun 2002
Location: Beaverton, Oregon
Posts: 487
Thanks: 0
Thanked 0 Times in 0 Posts
Default

My 1906 commercial #31883 matches your 1906 Dutch.

Steve
Steve Richards is offline  
Unread 11-06-2005, 05:53 PM   #8
Ron Smith
User
 
Ron Smith's Avatar
 
Join Date: Feb 2004
Location: Orygun
Posts: 4,243
Thanks: 118
Thanked 245 Times in 150 Posts
Default

Dwight,

1911 Erfurt # 8699 Straight.
__________________
I Still Need DWM side plate #49... if anyone runs across a nice one.


What ~Rudyard Kipling~ said...
Ron Smith is offline  
Unread 11-07-2005, 03:42 AM   #9
Dwight Gruber
User
 
Join Date: Jun 2002
Location: Portland, Oregon
Posts: 3,902
Thanks: 0
Thanked 1,318 Times in 431 Posts
Default

Ron,

Verrry interesting, thanks much.

Gerben and Steve,

Thanks for the numbers. Note, that for this transition I'm looking for 1908 and 1914 Commercials and their Commercial Navy and Commercial Military variations.

Mauro,

This is an interesting twist. Can you tell me, what is the year and serial# of the center "transitional" Luger?

--Dwight
Dwight Gruber is offline  
Unread 11-08-2005, 03:21 PM   #10
Jan C Still
User
 
Join Date: Jun 2002
Location: Box 240188, Douglas, Alaska, 99824
Posts: 463
Thanks: 0
Thanked 52 Times in 32 Posts
Default

Dwight
I have these 1908/1914 DWM Comm to add.
69911, 1908 DWM Commercial Army, spur
70149, 1908 DWM Commercial Army, spur
74200, 1914 DWM Commercial RG, straight
74596, 1914 DWM Commercial RG, straight
Jan
Jan C Still is offline  
Unread 11-08-2005, 05:57 PM   #11
Dwight Gruber
User
 
Join Date: Jun 2002
Location: Portland, Oregon
Posts: 3,902
Thanks: 0
Thanked 1,318 Times in 431 Posts
Default

Jan,

Excellent, thanks very much for those numbers.

So, to date, we have the spur to straight recoil spring well changeover at:

Erfurt, 1911 between # 7638--8699
DWM Military between 1914 #1839 and 1915 #8413b
DWM Commercial between 70149 and 72353.

Can anybody provide observations within those ranges to fine-tune them even more?

Continued thanks for the info.

--Dwight
Dwight Gruber is offline  
Unread 11-08-2005, 06:20 PM   #12
Jan C Still
User
 
Join Date: Jun 2002
Location: Box 240188, Douglas, Alaska, 99824
Posts: 463
Thanks: 0
Thanked 52 Times in 32 Posts
Default

Dwight
Excellent. You have one Commercial at 72353 straight cut. So DWM Commercial between 70149 and 72353.
Jan
Jan C Still is offline  
Unread 11-08-2005, 06:39 PM   #13
Ron Wood
Moderator
2010 LugerForum
Patron
 
Ron Wood's Avatar
 
Join Date: Jun 2002
Location: Santa Teresa New Mexico just outside of the West Texas town of El Paso
Posts: 7,022
Thanks: 1,090
Thanked 5,179 Times in 1,703 Posts
Default

Let's narrow the gap some more. DWM Commercial 71247 with spur (also has a grip safety).
__________________
If it's made after 1918...it's a reproduction
Ron Wood is offline  
Unread 11-08-2005, 08:41 PM   #14
Edward Tinker
Super Moderator
Eternal Lifer
LugerForum
Patron
 
Edward Tinker's Avatar
 
Join Date: Jun 2002
Location: North of Spokane, WA
Posts: 15,938
Thanks: 2,035
Thanked 4,538 Times in 2,097 Posts
Default

Dwight;

all have the spur;

1911 Erfurt 2155
1911 Erfurt 7686

1912 DWM 1064


Ed
Edward Tinker is offline  
Unread 11-08-2005, 09:46 PM   #15
Dwight Gruber
User
 
Join Date: Jun 2002
Location: Portland, Oregon
Posts: 3,902
Thanks: 0
Thanked 1,318 Times in 431 Posts
Default

Jan,

Oops, you're right, correction made in post.

Ed,

Thanks for the additional numbers. Interesting that the Erfurt statistic is narrowed down to within 1,100 guns.

Ron,

The spur is going to be a part of any grip-safety frame, an integral part of the grip safety/spring mounting tab.

--Dwight
Dwight Gruber is offline  
Unread 11-08-2005, 09:51 PM   #16
RockinWR
User
 
RockinWR's Avatar
 
Join Date: Dec 2002
Location: D/FW, Tx
Posts: 279
Thanks: 109
Thanked 31 Times in 16 Posts
Default

Hi Dwight,
* Doesn't Heinz's post above narrow the DWM Military range between 1914 #1839 and 1915 #8413b??
Respectfully,
Bob
RockinWR is offline  
Unread 11-08-2005, 11:07 PM   #17
Ron Wood
Moderator
2010 LugerForum
Patron
 
Ron Wood's Avatar
 
Join Date: Jun 2002
Location: Santa Teresa New Mexico just outside of the West Texas town of El Paso
Posts: 7,022
Thanks: 1,090
Thanked 5,179 Times in 1,703 Posts
Default

Dwight,
I know that, that's why I added the "(also has a grip safety)". Call it illuminating the obvious. Now, it remains to be seen if a Luger with a serial number lower than mine but higher than 70149 has the straight frame or if the continued production of grip safety models, at least up through 71247, retained the spur for all.
__________________
If it's made after 1918...it's a reproduction
Ron Wood is offline  
Unread 11-09-2005, 05:48 AM   #18
Dwight Gruber
User
 
Join Date: Jun 2002
Location: Portland, Oregon
Posts: 3,902
Thanks: 0
Thanked 1,318 Times in 431 Posts
Default

Bob,

You are right, of course. I'll have to do a better job of updating the post.

Ron,

One of the things I hope this survey illuminates is DWM's production flow. For instance, were there separate production lines maintained for P-08 (and 1914) military production and the corresponding Commercial production? Were there simultaneous Military production lines? Were Military and Commercial weapons interspersed, either individually or in groups? Are commercially numbered and proofed Lugers originally Military production which did not meet specification? (am I reinventing the wheel here and all this is documented somewhere?)

It strikes me that this kind of a production detail can provide a useful clue.

It is interesting to note that I have recorded no 1906-frame Commercial guns after #69111, except for your #71247 and a 1906 AE #93595(!). It is true, however, that DWM serviced Dutch contracts into 1914 (1906 frames), and provided Dutch parts to Vickers in 1921. Kenyon illustrates other sporadic grip-safety production into the Mauser era. Was a separate production line, or at least separate frame tooling, maintained for these purposes? Or did DWM perhaps have a several-thousand piece stockpile of these frames on hand? (unlikely, it would seem...)

--Dwight
Dwight Gruber is offline  
Unread 11-12-2005, 01:34 PM   #19
Dwight Gruber
User
 
Join Date: Jun 2002
Location: Portland, Oregon
Posts: 3,902
Thanks: 0
Thanked 1,318 Times in 431 Posts
Default

After several entries from another Forum, here is where the changeovers now stand:

DWM 1914 3500a spur
DWM 1915 3220c straight

Erfurt 1911 7686 spur
Erfurt 1911 8221 straight

1914 Commercial Army 70362 spur
1914 Commercial 72353 straight

It is interesting to note that all the DWM 1914 LP-08 reported, three between 669 and 1612, all have straight frames. There are more, but I am waiting to get a couple of details on them.

I appreciate the numbers from everybody, and am looking forward to more. Please examine and report Lugers around these ranges, not just within them; it is a reasonable expectation that there might be an overlap in the change.

--Dwight
Dwight Gruber is offline  
Unread 12-02-2005, 07:07 PM   #20
Dwight Gruber
User
 
Join Date: Jun 2002
Location: Portland, Oregon
Posts: 3,902
Thanks: 0
Thanked 1,318 Times in 431 Posts
Default

Just an update from a few more samples, in the hopes that it may drag some other guns out of the woodwork. Here is where the changeovers now stand:

DWM 1914 3500a spur
DWM 1915 3220c straight

Erfurt 1911 7686 spur
Erfurt 1911 8221 straight

1914 Commercial Army 70362 spur
1914 Commercial 72353 straight

There are seven 1914 LP-08 reported between 262(ns) and 7754(ns). None of them have spur frames. WAG question I wonder if this implies that DWM set up a new production "line" for LP-08 frames, or entire guns?

As before, I appreciate the numbers from everybody, and am looking forward to more. Please examine and report Lugers around these ranges, not just within them; it is a reasonable expectation that there might be an overlap in the change.

--Dwight
Dwight Gruber is offline  
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:25 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright © 1998 - 2024, Lugerforum.com