![]() |
my profile |
register |
faq |
search upload photo | donate | calendar |
![]() |
#1 |
New User
Join Date: May 2019
Posts: 2
Thanks: 4
Thanked 0 Times in 0 Posts
|
![]()
All,
A friend of a friend is trying to find information on a Luger his wife recently inherited. I was asked to assist (although I am more of a 1911 guy). I will say up front that the pics I was sent are the type that drive folks like me who love to peruse these forums crazy. However, any information would be greatly appreciated. He says the serial number is 8216, and that there is a crown over an “N” (I believe above the trigger on the left hand side). Thoughts on ID and or value? The condition appears fairly rough to me, but I advised him not to clean it whatsoever. |
![]() |
![]() |
![]() |
#2 |
Moderator
2010 LugerForum Patron Join Date: Jun 2002
Location: Santa Teresa New Mexico just outside of the West Texas town of El Paso
Posts: 7,003
Thanks: 1,086
Thanked 5,133 Times in 1,687 Posts
|
![]()
There is nothing to indicate it is a Swiss. It appears to be a 1920's Commercial in poor condition valuable only as a shooter. And since it is probably 7.65mm caliber, not worth much more than $750. He can clean it all he wants to, it wont affect the value
__________________
If it's made after 1918...it's a reproduction |
![]() |
![]() |
The following 6 members says Thank You to Ron Wood for your post: |
![]() |
#3 |
User
Join Date: Jun 2002
Location: Byron, Georgia
Posts: 1,692
Thanks: 789
Thanked 1,670 Times in 548 Posts
|
![]()
I agree with Ron. I see nothing to suggest that it's Swiss.
|
![]() |
![]() |
The following member says Thank You to Doubs for your post: |
![]() |
#4 |
User
Join Date: Mar 2019
Location: Wrong side of the Delaware river
Posts: 300
Thanks: 207
Thanked 432 Times in 170 Posts
|
![]()
harrisonhud, click on the FAQ along the top bar to get a wealth of info on Lugers.
Clearly marked DMW on the top Does not have the Swiss cross on the top Does not have the grip safety that Swiss Lugers have The Trigger Sideplate is not numbered on the top indicating Commercial not military Military would be 9mm, most Commercial 7.65mm (.30 Luger) A closer look at the photo shows corrosion, ergo "rough shape" If the bore has rust or pitting it may not be woth much at all. |
![]() |
![]() |
The following member says Thank You to Kiwi for your post: |
![]() |
#5 |
User
Join Date: Jun 2005
Posts: 63
Thanks: 0
Thanked 48 Times in 23 Posts
|
![]()
As a long-time gunsmith, the advice "clean it all he wants to" almost makes me cringe.
I've seen "cleaning" and it can be ugly. so, if he does want to clean it, the advice is simple" by hand, using 0000 steel wool, and lots of oil as a lubricant while scrubbing. Gets the rust off and preserves what original finish is left, if he's not too heavy-handed. Soapbox off. |
![]() |
![]() |
The following 4 members says Thank You to Patrick Sweeney for your post: |
![]() |
#6 |
New User
Join Date: May 2019
Posts: 2
Thanks: 4
Thanked 0 Times in 0 Posts
|
![]()
I apologize for the mis-identification gentlemen, and thank you sincerely for your guidance!
|
![]() |
![]() |
![]() |
#7 |
User
Join Date: Aug 2018
Location: Rocky Mountain High
Posts: 309
Thanks: 173
Thanked 246 Times in 84 Posts
|
![]()
Or a brass brush works well for cleaning rust off without damage to the finish.
|
![]() |
![]() |
![]() |
|
|