Poll - M1906 DWM-Swiss Cross/Shield Lugers

Pete Ebbink · 04-29-2007, 04:07 PM

POLL - M1906 DWM-Swiss Cross/Shield Lugers

Please join us in helping provide some info. about your M1906 DWM-Swiss Luger (Cross/Shield variety only).

I am helping Members Mike and Armin to establish if a variety in the numbering of the TD levers and the trigger side plate exist and came from the factory.

Most commercial contract Lugers will have the 2-digits of the TD lever and the trigger side plate placed on the bottom edge with the tops of these numbers pointing away from the side of the pistol (...I call this rightside-up).

Mike, Armin, and others theorize that some of these M1906 DWM-Swiss cross/shield Lugers left the factory with un-numbered TD levers and the 2 digits on the trigger side plate upside-down...that is with the tops of their numbers pointing towards the side of the pistol.

If you own a M1906 DWM-Swiss cross/shield Luger, please take a moment and fill out the Poll.

Please remember to indicate if you think your Luger is in a factory-original condition or a Swiss Ordnance rework or other rework.

Thanks in advance for your help !!!

Armin · 04-29-2007, 05:01 PM

Pete,
unfortunately I cannot distinguish between a factory blue and a ordnance reblue. I assume that the Swiss knew (or perhaps still know) how to reblue a Luger perfectly.
Regards, Armin.

View Poll Results: M1906 Swiss Cross/Shield Numbering On Your TD Lever and Your Trigger Side Plate
Serials 9051-12000 (made 1909) - Both TD lever & side plate have 2-digts, tops of numbers pointing away from Luger side.	2	20.00%
Serials 9051-12000 (made 1909) - No number on TD lever & side plate numbers are upside-down.	2	20.00%
Serials 12001-13000 (made 1910) - Both TD lever & side plate have 2-digts, tops of numbers pointing away from Luger side.	1	10.00%
Serials 12001-13000 (made 1910) - No number on TD lever & side plate numbers are upside-down.	1	10.00%
Serials 13001-13700 (made 1911) - Both TD lever & side plate have 2-digts, tops of numbers pointing away from Luger side.	1	10.00%
Serials 13001-13700 (made 1911) - No number on TD lever & side plate numbers are upside-down.	1	10.00%
Serials 13701-14515 (made 1913) - Both TD lever & side plate have 2-digts, tops of numbers pointing away from Luger side.	2	20.00%
Serials 13701-14515 (made 1913) - No number on TD lever & side plate numbers are upside-down.	1	10.00%
Serials 14516-15215 (made 1914) - Both TD lever & side plate have 2-digts, tops of numbers pointing away from Luger side.	2	20.00%
Serials 14516-15215 (made 1914) - No number on TD lever & side plate numbers are upside-down.	1	10.00%
My Luger is a factory-original finish.	4	40.00%
My Luger is an Ordnance arsenal rework or other rework.	0	0%
My Luger has another numbering format on the TD lever & side plate (Please indicate in the discussion section, below).	0	0%
I chose not to participate or I do not own a Swiss Luger but want to see the Poll results.	5	50.00%
Multiple Choice Poll. Voters: 10. You may not vote on this poll

04-29-2007, 04:07 PM	#1
Pete Ebbink User Join Date: Jun 2002 Location: The USA Posts: 5,919 Thanks: 0 Thanked 6 Times in 4 Posts	Poll - M1906 DWM-Swiss Cross/Shield Lugers POLL - M1906 DWM-Swiss Cross/Shield Lugers Please join us in helping provide some info. about your M1906 DWM-Swiss Luger (Cross/Shield variety only). I am helping Members Mike and Armin to establish if a variety in the numbering of the TD levers and the trigger side plate exist and came from the factory. Most commercial contract Lugers will have the 2-digits of the TD lever and the trigger side plate placed on the bottom edge with the tops of these numbers pointing away from the side of the pistol (...I call this rightside-up). Mike, Armin, and others theorize that some of these M1906 DWM-Swiss cross/shield Lugers left the factory with un-numbered TD levers and the 2 digits on the trigger side plate upside-down...that is with the tops of their numbers pointing towards the side of the pistol. If you own a M1906 DWM-Swiss cross/shield Luger, please take a moment and fill out the Poll. Please remember to indicate if you think your Luger is in a factory-original condition or a Swiss Ordnance rework or other rework. Thanks in advance for your help !!!

04-29-2007, 05:01 PM	#2
Armin User Join Date: Jun 2002 Location: Germany Posts: 35 Thanks: 0 Thanked 11 Times in 6 Posts	Pete, unfortunately I cannot distinguish between a factory blue and a ordnance reblue. I assume that the Swiss knew (or perhaps still know) how to reblue a Luger perfectly. Regards, Armin.