Shooting a Collector Swiss

southriv · 03-24-2005, 11:05 PM

I would like to shoot my prize, a 1906 Swiss cross in shield. The gun is near perfect and I am somewhat worried about the risk of damage. I have seen recommendations about changing out the toggle for shooting a collcetor. For a donor I am considering a 1915 DWM mismatch that is my shooter. It is in nice condition with the toggle (which is matching to itself) being the mismatch. It functions well with a new mag - I regularly put 200-300 a month through it.

As the DWM is a mismatch, the date of the toggle is a question. It is of comparable quality to the 1906 Swiss (which dates from about 1911), is about 97-98% and on close inspection looks nearly identical in all aspects to the toggle in the 1906.

For test fit (not shooting) I put this toggle assembly into the 1906. It fits and functions perfectly. I have not, however made any comparisons with measuring instruments. I also tried this assembly for fit in a 42 byf and it worked well, also. With the byf I was able to test a dummy round for extraction. With all tests I used the pistolÃ¢??s original rear pin.

I donÃ¢??t have access to a local gunsmith to check this out. I have a small hobby tool room and a decent array of measuring instruments. I am, at best, an amateur gunsmith. I have improved the function of and fixed many of my guns over the years. I do, however, recognize my limitations and always ask or try to farm out any work of which I am uncertain. Is there any way I can check this out further? I understand one critical area is the measurement of headspace - which I assume is at the face of the breechblock and when the toggle assembly is closed. How can I measure this, what other things should be checked & do you think what I am doing is advisable?

Any advice, guidance would be appreciated.

Thanks, Bob

03-24-2005, 11:05 PM	#1
southriv User Join Date: Dec 2004 Location: Countryside New England Posts: 148 Thanks: 0 Thanked 0 Times in 0 Posts	Shooting a Collector Swiss I would like to shoot my prize, a 1906 Swiss cross in shield. The gun is near perfect and I am somewhat worried about the risk of damage. I have seen recommendations about changing out the toggle for shooting a collcetor. For a donor I am considering a 1915 DWM mismatch that is my shooter. It is in nice condition with the toggle (which is matching to itself) being the mismatch. It functions well with a new mag - I regularly put 200-300 a month through it. As the DWM is a mismatch, the date of the toggle is a question. It is of comparable quality to the 1906 Swiss (which dates from about 1911), is about 97-98% and on close inspection looks nearly identical in all aspects to the toggle in the 1906. For test fit (not shooting) I put this toggle assembly into the 1906. It fits and functions perfectly. I have not, however made any comparisons with measuring instruments. I also tried this assembly for fit in a 42 byf and it worked well, also. With the byf I was able to test a dummy round for extraction. With all tests I used the pistolÃ¢??s original rear pin. I donÃ¢??t have access to a local gunsmith to check this out. I have a small hobby tool room and a decent array of measuring instruments. I am, at best, an amateur gunsmith. I have improved the function of and fixed many of my guns over the years. I do, however, recognize my limitations and always ask or try to farm out any work of which I am uncertain. Is there any way I can check this out further? I understand one critical area is the measurement of headspace - which I assume is at the face of the breechblock and when the toggle assembly is closed. How can I measure this, what other things should be checked & do you think what I am doing is advisable? Any advice, guidance would be appreciated. Thanks, Bob