LugerForum Discussion Forums my profile | register | faq | search
upload photo | donate | calendar

Go Back   LugerForum Discussion Forums > Luger Discussion Forums > Navy Lugers

Reply
Thread Tools Display Modes
Unread 05-26-2004, 01:28 AM   #21
RockinWR
User
 
RockinWR's Avatar
 
Join Date: Dec 2002
Location: D/FW, Tx
Posts: 278
Thanks: 109
Thanked 30 Times in 15 Posts
Post

Ronnie,
* In the intervening period while you examine your pistol against the last set of questions I posed, let me give an interim update:
- The three digit N417 is far too early for a 1939, 42 code Mauser P.08. A three digit Navy property number would predate the "K" date pistols and would be more consistent with the Weimar Reichmarine period of 1929-1933. Typically an Eagle/M or E/MIII would be pantographed on the frame's left upper panel during this period IMHO.
- I suspect the frame has no "hump" as it should in 1939. The frame's grip surfaces appear to be "rust" blue. The receiver, toggle train, & barrel appear "salt" blued more consistent with a 1939 dated Mauser pistol. The non matching wood "Erfurt" grips seem more consistent with the frame's Weimar period of Mfg.
- No Army nor KMarine 1939, Code 42 Mauser P.08 have been reported in the "No Suffix" block. The overall S/N range given by Jan Still in Third Reich Luger for this date/code is 200r-8250z.
- Only 400 Code 42's were procured by the Kreigsmarine in 1939...mostly in the "y" & "z" block.
- Large sE/63's are not unknown on KMarine "z" block examples reported. Certainly a minority combination as sE/655's predominated this late in 1939 examples.
- The frame's pantographed sE/M appears to have no halo and appears to post date the frame's age significantly. Style/Font having not been authenticated by the P.08 collecting fraternity(Cabal & other) causes serious questions.
- The bore diameter marking seem off center to the barrel's S/N. I do not ever remember seeing a Marine property number marked on a barrel until seeing this one. The barrel's S/N font seems to differ, relative to the digits "3" & "4", to the receiver's numbers although the picture's angle makes it difficult to confirm this. Your report however is noted.
- The presence or absence of "halo's" around the "N417" markings is difficult to assess given the "white" highlighting.
- Army "t" block Mag appears to be 1937 vintage w/ the small sE/63 acceptance.
* Given the disparity of items noted, wartime rework acceptance by a Naval Arsenal Inspector appears unlikely.
Respectfully,
Bob
RockinWR is offline   Reply With Quote
Unread 05-26-2004, 12:34 PM   #22
lugerholsterrepair
Moderator
Lifetime Forum
Patron
 
lugerholsterrepair's Avatar
 
Join Date: Jun 2002
Location: Arizona/Colorado
Posts: 7,760
Thanks: 4,848
Thanked 3,099 Times in 1,426 Posts
Post

Bob, I appreciate your intelligent scholarly writeup about this pistol and it's markings. It makes for interesting reading. Thanks.

Ted, I am sure your courage cannot be called into question. Jumping out of an airplane is exciting but there are amny more things in life that demand greater bravery. Leading a moral life, providing for your family, doing what's right. It's a jungle out there and all of that makes jumping out of an airplane childs play.Thanks again my Friend, I owe you one.... Jerry Burney
__________________
Jerry Burney
11491 S. Guadalupe Drive

Yuma AZ 85367-6182


lugerholsterrepair@earthlink.net

928 342-7583 (CO & AZ) Year Round
719 207-3331 (cell)


"For those who Fight For It, Life has a flavor the protected will never know."
lugerholsterrepair is offline   Reply With Quote
Unread 05-26-2004, 08:01 PM   #23
Evan Duke
User
 
Join Date: Jul 2002
Location: Florida
Posts: 52
Thanks: 2
Thanked 7 Times in 3 Posts
Post

Jerry, maybe I did not explain clearly. I had proof #50 on 2 lugers. On the first luger proof #50 had the letters PS next to it. On the second luger proof # 50 had the letters RBL nex to it. My opinion is that the PS stood for postschutz (postal) and the RBL stood for Reichsslufscutzbund (state air protection league)
The explanation in the book states that proofs # 49,50, 51 indicate a contract production weapon.
I don't know how this relates to the supposed navy luger other than that proof marks were similar. Just my opinion,Jerry you may now unload your weapon and put the safety on. Your friend Chuck
Evan Duke is offline   Reply With Quote
Unread 05-26-2004, 11:52 PM   #24
RockinWR
User
 
RockinWR's Avatar
 
Join Date: Dec 2002
Location: D/FW, Tx
Posts: 278
Thanks: 109
Thanked 30 Times in 15 Posts
Post

Jerry,
* Thanks a bunch. Truly appreciate your thoughts.
* Hope your rehab is going well. Trap shooting buddy of mine had two knees done sequentially. Took slightly more than a year; but, he's prancing around now like a 20's Flapper. Stick with the physical "terrorist's" regime & it will all work out partner!
* Brevity is a virtue; however, not my strong suit. Just another night on the Net cracking the ole books @ Luger U. Convinced one mistake avoided by someone will make it all worthwhile.
* In fairness to Ronnie, I have exercised an educated guess on a few key items. We should allow him some time to respond. However, the story on this puppy is rapidly unfolding & the Forum's brain trust have the fat lady three arias after mid-opera's intermission.

Chuck,
* Can you post either Luger's year date, toggle markings/Mfr, general S/N range, marking location(s), or any further definitive details??
* Probably missing something; but, the only examples I recall having both the Army acceptance stamps of #46 & #47 coupled with the commercial Proof of #48 are some Dutch Banners & 1940 Police Banner's diverted to the Army.
* Can't say I have ever heard/read/seen of any sE/PS or sE/RBL marked P.08's in any Luger reference book/venue over the last 35 years.
* I'd have less concerns if you told me these PS & RBL rigs had small caliber pocket pistols. The 9mmP was usually reserved for front line Military troops. Even the Police were quasi-military & they had to take the leftovers.
* But, hey, I'm always open to learn & virtually no-one has seen everything.
Respectfully,
Bob
RockinWR is offline   Reply With Quote
Unread 05-27-2004, 10:00 PM   #25
Double O
RIP
 
Join Date: Jan 2004
Location: High Plains of Texas
Posts: 45
Thanks: 0
Thanked 0 Times in 0 Posts
Post

Knowledgeable compatriots--
Excuse the silence. I've been across the state trying to make a living. I'll try to absorb the posts since my absence and reply. Thank you ALL for your incisive input!!

Ronnie
Double O is offline   Reply With Quote
Unread 05-28-2004, 07:21 PM   #26
Navy
RIP
 
Navy's Avatar
 
Join Date: Jun 2002
Location: Dc 'burbs in Virginia
Posts: 2,482
Thanks: 0
Thanked 16 Times in 10 Posts
Post

I stick with my original reply.
These marking are bogus.
Tom A.
Navy is offline   Reply With Quote
Unread 05-29-2004, 09:55 PM   #27
Double O
RIP
 
Join Date: Jan 2004
Location: High Plains of Texas
Posts: 45
Thanks: 0
Thanked 0 Times in 0 Posts
Talking

Ronnie,
* See the attached URL for a post on the "Mauser Hump".
http://forums.lugerforum.com/cgi-bin...topic;f=2;t=00 0112
* Almost got a line on this one.
* After seeing the picture/explaination at the bottom of the attached URL post, can you now respond whether your S/N 3404ns has a "frame hump" or not.
* Also, is the inside of the frame "in the white" or blued??
* One last thing: Is there a number or numbers on the inside of the side plate?? What are they??
Thanks,
Bob

</font><blockquote><font size="1" face="Verdana,Tahoma,Arial,Helvetica,Geneva">quote:</font><hr /><font size="2" face="Verdana,Tahoma,Arial,Helvetica,Geneva"> </font><hr /></blockquote><font size="2" face="Verdana,Tahoma,Arial,Helvetica,Geneva">Bob,
Thanks for your patient prompting of this unlearned neophyte---
Answers (albiet late) to your post above are as follows.
1. No, no frame hump. I guess I was looking for something pretty overt, but this is fairly subtle to my untrained eye. After comparing it to a byf 41, I can see the difference.
2. The inside of the frame is "in the white". I do know what that is.
3. There is the number "39" inside the side plate, and almost exactly on the opposite side of the last two digits of the s/n

Also of interest to me, is that the initials "MBH" just in front of the lug on the bottom of the receiver. These are pretty small, about 1/8 or less Wonder what those mean?
I now realize that this pistol is probably "boosted", by the addition of spurrious marks. But, HEY, that's what this forum is about, or at least I thought it was. To increase everyone's knowledge!!! It's great to have several folks come down on both sides of this issue. I am in no way dissapointed in what this has brought. Win some, lose some. Still it's a nice Luger. Perhaps next, I'll post the pride of my meager collection. Yes, a Navy!!

MANY THANKS TO YOU ALL!!!

Still learning in West Texas!!!

Ronnie
Double O is offline   Reply With Quote
Unread 05-29-2004, 10:03 PM   #28
Edward Tinker
Super Moderator
Eternal Lifer
LugerForum
Patron
 
Edward Tinker's Avatar
 
Join Date: Jun 2002
Location: North of Spokane, WA
Posts: 15,909
Thanks: 1,986
Thanked 4,500 Times in 2,076 Posts
Post

Excellent learning thread wasn't it Ronnie. I appreciate your willingness to learn from one of your own guns,

Thanks and hats off to you bud!

Ed
__________________
Edward Tinker
************
Co-Author of Police Lugers - Co-Author of Simson Lugers
Author of Veteran Bring Backs Vol I, Vol II, Vol III and Vol IV

Edward Tinker is offline   Reply With Quote
Unread 05-30-2004, 02:15 PM   #29
lugerholsterrepair
Moderator
Lifetime Forum
Patron
 
lugerholsterrepair's Avatar
 
Join Date: Jun 2002
Location: Arizona/Colorado
Posts: 7,760
Thanks: 4,848
Thanked 3,099 Times in 1,426 Posts
Post

This has been a great thread. I hope we all learned something from it. I know I have.

I know these can get heated up a little and I hope no one got their feathers ruffled...

Just trying to nail down accurate information. Jerry Burney
__________________
Jerry Burney
11491 S. Guadalupe Drive

Yuma AZ 85367-6182


lugerholsterrepair@earthlink.net

928 342-7583 (CO & AZ) Year Round
719 207-3331 (cell)


"For those who Fight For It, Life has a flavor the protected will never know."
lugerholsterrepair is offline   Reply With Quote
Unread 05-30-2004, 04:02 PM   #30
Herb
User
 
Herb's Avatar
 
Join Date: Jun 2002
Location: Utah, in the land of the Sleeping Rainbow
Posts: 1,457
Thanks: 0
Thanked 1 Time in 1 Post
Post

With reference to the swastika and the little 'ends' this is a representation of the Sonnenrad, or Sunwheel, style of the swastika. It is an ancient Norse representaion of the sun. This Sonnenrad was found quite often on various early Nazi pieces of equipment, the early SA enlisted mans belt buckle, the early Luftwaffe Officers dress dagger and other items.
http://www.portal-ns.com/thecensure/text12.htm
http://www.johnsonreferencebooks.com...stwar/9883.jpg
http://65.160.172.250/buckles/b091.jpg
__________________
Utah, where gun control means a steady trigger pull
Herb is offline   Reply With Quote
Unread 05-31-2004, 02:44 PM   #31
lugerholsterrepair
Moderator
Lifetime Forum
Patron
 
lugerholsterrepair's Avatar
 
Join Date: Jun 2002
Location: Arizona/Colorado
Posts: 7,760
Thanks: 4,848
Thanked 3,099 Times in 1,426 Posts
Post

Herb, Interesting point but where does this lead us to in terms of the stamp found on this pistol?

Are you saying because of this Hakenkreuz made into a(sort of) sonnenrad that this legitimizes this stamp?

Personally, I don't think it is a sonnenrad at all but a crappy job of making the swastica.

The cross lines were not made exactly on center and were too far to the edge of the teardrop circle and consequently our hobbyist could do nothing but curve the ends. The ends of this swastica are also out of proportion to the body, way too small to accurately be a sonnenrad.

If we couple the early sonnenrad with the lateness of the stick wing Eagle we end up with quite the Frankenstein emblem.

Let me know your thoughts...Jerry Burney
__________________
Jerry Burney
11491 S. Guadalupe Drive

Yuma AZ 85367-6182


lugerholsterrepair@earthlink.net

928 342-7583 (CO & AZ) Year Round
719 207-3331 (cell)


"For those who Fight For It, Life has a flavor the protected will never know."
lugerholsterrepair is offline   Reply With Quote
Unread 05-31-2004, 04:21 PM   #32
Herb
User
 
Herb's Avatar
 
Join Date: Jun 2002
Location: Utah, in the land of the Sleeping Rainbow
Posts: 1,457
Thanks: 0
Thanked 1 Time in 1 Post
Post

Jerry, I did not post the sonnenrad to attempt to indicate the marking was correct but only to point out that the "legs" on the swastika were probably not in error and that they did in fact represent another form of the swastika. What puzzles me about the whole stamping is the cost involved in having a die made of that complexity, finess and to fit the curvature of the barrel, that is a lot of money just to attempt to fake something, there are a lot of easier and cheaper ways of going about it. Is it real or fake, who knows, strange markings do pop up now and then.
__________________
Utah, where gun control means a steady trigger pull
Herb is offline   Reply With Quote
Unread 05-31-2004, 04:56 PM   #33
Double O
RIP
 
Join Date: Jan 2004
Location: High Plains of Texas
Posts: 45
Thanks: 0
Thanked 0 Times in 0 Posts
Post

Herb,
You know you bring up a point that has me puzzled too. I'm sitting here having cherry cobbler with a dollop of vanilla, questioning why someone would go to the expense. Looking at the marks, they are NOT shabbily done. Very fine lines, and evenly etched into the metal. Tho not very deep.
So now I'm wondering just how much a decent 1939 chamber marked 42 would be worth, as opposed to one "boosted" to some imaginary Navy unit/mark. Not that it makes any difference at this point, just curious as to what they thought might be accomplished in an increase in value.
Then the other thing behind that, I've been thinking of sending it to Thor----. Or, should I keep it as the curiosity it is? <img border="0" alt="[ouch]" title="" src="graemlins/c.gif" /> What's the group's opinion??

This is giving me a headache in West Texas

Ronnie
Double O is offline   Reply With Quote
Unread 05-31-2004, 06:28 PM   #34
Thor
User
 
Thor's Avatar
 
Join Date: Jun 2002
Location: Rio Rancho, New Mexico
Posts: 4,583
Thanks: 958
Thanked 970 Times in 276 Posts
Post

Send it to Thor! hahahahha! Send it to Thor!
__________________
Thor's Luger Clinic http://members.rennlist.com/lugerman/
Ted Green (Thor Yaller Boots)
725 Western Hills Dr SE, Rio Rancho, NM 87124
915-526-8925 Email
thor340@aol.com
-----------------------------------
John3:3
Jesus answered and said to him, "Most assuredly, I say to you, unless one is born again, he cannot see the kingdom of God."
Thor is offline   Reply With Quote
Unread 05-31-2004, 08:32 PM   #35
lugerholsterrepair
Moderator
Lifetime Forum
Patron
 
lugerholsterrepair's Avatar
 
Join Date: Jun 2002
Location: Arizona/Colorado
Posts: 7,760
Thanks: 4,848
Thanked 3,099 Times in 1,426 Posts
Post

Herb, OH! OOPS...It is my guess, and without a close inspection of the metal etchings, I could not say for sure, I don't think this was put on there with a die at all, but engraved.

There are machinists with computer engravers out there where a copy can be scanned out of a page on a book and neatly engraved, any size you want.
Curvature would not be a factor, nor would the expense of a die.
As for escalating cost concerning the placement of a spurious mark, I would guess it could be as much as a thousand dollars without stretching credulity. Whatever the market would bear in the heat and dim light of your normal gun show.
I suspect that John Sabato or Ron wood or someone else out there in our membership could expound on this subject that is more knowledgeable than myself.

Herb says; strange markings do pop up now and then. Herb, I suppose this is true but not that often and so out of the norm for the stick Eagle. This was pretty much set in stone and one of this variation is wrong in so many ways it would be one of a kind and span a decade of different styles.

I vote you send it to Thor and rub out all traces of this horrible disfigurement.Bring this pistol back to what it once was.
...But then, that's just me. Jerry Burney
__________________
Jerry Burney
11491 S. Guadalupe Drive

Yuma AZ 85367-6182


lugerholsterrepair@earthlink.net

928 342-7583 (CO & AZ) Year Round
719 207-3331 (cell)


"For those who Fight For It, Life has a flavor the protected will never know."
lugerholsterrepair is offline   Reply With Quote
Unread 05-31-2004, 10:57 PM   #36
Navy
RIP
 
Navy's Avatar
 
Join Date: Jun 2002
Location: Dc 'burbs in Virginia
Posts: 2,482
Thanks: 0
Thanked 16 Times in 10 Posts
Post

Gentlemen,

This thing is ABSOLUTELY phony-baloney (My nicest discriptor for such foolishness).

Tuition at Luger University can be costly; it can be *much* more expensive when you try to prove a nonworking hypothesis, and especially when one decides to ignore history, research and the freely-given advice of many who have lots of knowledge and experience in the field.

This is the case here.

Even allowing the extremely unlikely probability that the markings were legitimate, the ones cited are department acceptance ("Proof") marks. They are NOT grip strap markings; they would be on the right side of the receiver. This is basic stuff, folks.

It is logically impossible to prove a negative; I shall end my conversation on this topic by stating that anyone who pays a premium for this piece is an example of the old axiom about a fool and his money.

Tom A.
Navy is offline   Reply With Quote
Unread 06-01-2004, 12:12 AM   #37
RockinWR
User
 
RockinWR's Avatar
 
Join Date: Dec 2002
Location: D/FW, Tx
Posts: 278
Thanks: 109
Thanked 30 Times in 15 Posts
Post

Ronnie,
* Commend you for sticking with this thread & responding to my latest set of questions. This has been an excellent example to study and learn from. As you have been into P.08's for a long time, I suspect you knew this already.
* While at this stage it may seem anti-climatic, it is always difficult to convey to a fellow collector troubling news. This example is spurious IMHO. I hope I'm wrong; but, even if I am, this piece would always raise more suspicions than it would satisfy.
- The lack of a hump on the frame indicates the frame at least predates 1937 and is inconsistent with the 1939 upper cannon assembly.
- The "in-the- white" finish inside the frame coupled with the probable "rust blued" exterior indicates the frame predates the 2nd variation 1937 Mauser P.08's.
- The sideplate's "39" is not consistent with the proper inside side plate number expected (35) for a 1939 S/N 3404ns. This plate likely came from a third P.08.
- Interim report observations are confirmed. Now given the pistol's inconsistencies, the e/M lacks that much more credibility as noted by Tom A, Jerry, Blanye, etal. Appears Gerben had a bead on this one too.
* Why you ask?? "MBH" probably knows. Wonder if that stands for "mucho big hombre"? Anyway, a 4-5 times asking price might explain the rationale MBH had in mind.
* I know Thor can do wonders; but, I doubt Tom is into creating a "Humped frame" out of this Weimar handle. The inside well marks or subtle machining differences between DWM & Mauser might just be the next tip off.
* So, as a fellow Texan, I'd recommend you just enjoy this puppy by popping a few rattlesnakes out there & keep 'em west of El Paso for me... OK?. Since I haven't seen any rattlers in these here parts east of you, I know you are already doing a fine job between cobblers.
Thanks,
Bob
RockinWR is offline   Reply With Quote
Unread 11-05-2005, 11:32 PM   #38
RGARRETT
Guest
 
Posts: n/a
Default

I bought this luger in Oct 05 at a small Texas gun show. Very interesting to find it in this discussion. I think I understand the discussion on the eagle. Also the grips look the age of the gun, but are a little thick. i.e. the checkering stops before it reaches the metal. Do many grips do this.
  Reply With Quote
Unread 11-06-2005, 11:14 AM   #39
Pete Ebbink
User
 
Pete Ebbink's Avatar
 
Join Date: Jun 2002
Location: The USA
Posts: 5,919
Thanks: 0
Thanked 6 Times in 4 Posts
Default

Richard,

Did you buy this at a shooter price...?
Pete Ebbink is offline   Reply With Quote
Unread 11-06-2005, 03:37 PM   #40
RGARRETT
Guest
 
Posts: n/a
Default

No, I paid the price for a luger without the Navy markings. Then I found it on luger forum. I still find it interesting. I collect Regimental Beir Steins and have a couple of fakes just to show the difference.
  Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:05 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright © 1998 - 2024, Lugerforum.com