Hyatt Shop Offering...

Pete Ebbink · 11-23-2006, 12:43 PM

This one looks decent, but then I notice the extractor that looks a bit too narrow :

http://www.gunsamerica.com/guns/976798665.htm

Photo of the Hyatt Shop offering :

Photo of a similar Swiss M1900 from the Simpson web site :

drbuster · 11-23-2006, 04:36 PM

Gads, Pete!! You have the eyes of an eagle, or shall I say that an eagle has the eyes of a Pete!! What you say "appears" to be correct, with your comparison photo. Is is possible that the owner of the piece actually fabricated a wrong sized 1900 extractor, or can one guess that there was natural variation in the original manufacture?

c3006 · 11-23-2006, 06:33 PM

Any chance its a bad replacment in a original pistol? It looks like it just does not quite fill the slot.

Pete Ebbink · 11-24-2006, 11:18 AM

My guess would be a "new" extractor was added with a moderen day one that just was not machined correctly.

Cannot see such a piece passsing DWM or Swiss inspectors with their finite measuring gauges.

At the low price of only $ 3300 for a M1900 Swiss, I am inclined to think the straw on this piece may not have been reworked, but the blue has been redone, nicely.

Given the geographical region of this gun shop and the fact these are consignment pieces, I would think they come out of a fairly talented gun-smith and refinisher's shop that resides in this region of the USA.

Could also be a Swiss reblue, but I would have thought the Swiss would have used one of their own Bern-made reinforced extractors...

Pete Ebbink · 11-24-2006, 08:01 PM

More photos of this same gun over on Gun Broker...with a price that is $ 100 less...

http://www.gunbroker.com/Auction/Vie...?Item=61141386

Pete Ebbink · 12-01-2006, 06:15 PM

As requested...some wanted to see a photo of a Swiss-made re-inforced extrator.

Here is a shot of one on a gun for sale with the Simpson folks.

Once in a while you will see this re-inforced extractor strawed as well, but usually in a blued finish :

Heinz · 12-02-2006, 08:48 AM

Nice grip screws

11-23-2006, 12:43 PM	#1
Pete Ebbink User Join Date: Jun 2002 Location: The USA Posts: 5,919 Thanks: 0 Thanked 6 Times in 4 Posts	Hyatt Shop Offering... This one looks decent, but then I notice the extractor that looks a bit too narrow : http://www.gunsamerica.com/guns/976798665.htm Photo of the Hyatt Shop offering : Photo of a similar Swiss M1900 from the Simpson web site :

11-23-2006, 06:33 PM	#3
c3006 User Join Date: Sep 2005 Location: east tn Posts: 526 Thanks: 5 Thanked 12 Times in 5 Posts	Any chance its a bad replacment in a original pistol? It looks like it just does not quite fill the slot. __________________ Men Accustomed unto thier arms and their liberties will never endure the yoke. James Harrington 1776

12-02-2006, 08:48 AM	#7
Heinz User Join Date: Jun 2002 Location: Greenville SC Posts: 1,004 Thanks: 377 Thanked 410 Times in 180 Posts	Nice grip screws Attached Thumbnails

11-23-2006, 04:36 PM	#2
drbuster User Join Date: Jun 2002 Location: San Mateo, California Posts: 1,432 Thanks: 2 Thanked 71 Times in 56 Posts	Gads, Pete!! You have the eyes of an eagle, or shall I say that an eagle has the eyes of a Pete!! What you say "appears" to be correct, with your comparison photo. Is is possible that the owner of the piece actually fabricated a wrong sized 1900 extractor, or can one guess that there was natural variation in the original manufacture?

11-24-2006, 11:18 AM	#4
Pete Ebbink User Join Date: Jun 2002 Location: The USA Posts: 5,919 Thanks: 0 Thanked 6 Times in 4 Posts	My guess would be a "new" extractor was added with a moderen day one that just was not machined correctly. Cannot see such a piece passsing DWM or Swiss inspectors with their finite measuring gauges. At the low price of only $ 3300 for a M1900 Swiss, I am inclined to think the straw on this piece may not have been reworked, but the blue has been redone, nicely. Given the geographical region of this gun shop and the fact these are consignment pieces, I would think they come out of a fairly talented gun-smith and refinisher's shop that resides in this region of the USA. Could also be a Swiss reblue, but I would have thought the Swiss would have used one of their own Bern-made reinforced extractors...

11-24-2006, 08:01 PM	#5
Pete Ebbink User Join Date: Jun 2002 Location: The USA Posts: 5,919 Thanks: 0 Thanked 6 Times in 4 Posts	More photos of this same gun over on Gun Broker...with a price that is $ 100 less... http://www.gunbroker.com/Auction/Vie...?Item=61141386

12-01-2006, 06:15 PM	#6
Pete Ebbink User Join Date: Jun 2002 Location: The USA Posts: 5,919 Thanks: 0 Thanked 6 Times in 4 Posts	As requested...some wanted to see a photo of a Swiss-made re-inforced extrator. Here is a shot of one on a gun for sale with the Simpson folks. Once in a while you will see this re-inforced extractor strawed as well, but usually in a blued finish :