New Guy with First Luger

fury413rb · 04-11-2017, 07:38 AM

Hello!

My residence is out of state so had it shipped back to Ohio.

Its a 1940 dated code 42 mauser. It should be here by the end of the week and appears to be a bit rough, but all matching externally other than the mag.

Will post pics ASAP and thanks for letting me join! I wanted a shooter so that was my goal.

will have more once it gets here

second mag

second mag

alanint · 04-11-2017, 09:57 AM

The grips have either been crudely re checkered or are replacements.

DavidJayUden · 04-11-2017, 10:54 AM

Looks like a good shooter Luger and project gun. Have fun and let the learning begin!
dju

fury413rb · 04-11-2017, 12:00 PM

Quote:

Originally Posted by alanint

The grips have either been crudely re checkered or are replacements.

I figured they are cheap replacements. I will take more pics when it gets here and strip it down as well.

I have some Vopo grips I can put on it for fun.

I'm a budding DDR collector as well. I just bought my first Trabant as well.

rhuff · 04-11-2017, 02:32 PM

A breakdown with a good inspection and cleaning will likely have it looking better....also a good lubing while down. It looks like it can be a good shooter for you. Let us know how things go at the range when time allows. Congrats on your first Luger.

fury413rb · 04-11-2017, 03:16 PM

Quote:

Originally Posted by rhuff

A breakdown with a good inspection and cleaning will likely have it looking better....also a good lubing while down. It looks like it can be a good shooter for you. Let us know how things go at the range when time allows. Congrats on your first Luger.

thanks! I hopefully will be able to get it in my hands by the end of the week.

Curly1 · 04-11-2017, 03:45 PM

Welcome to the forum, have fun shooting the hell out of it.

fury413rb · 04-11-2017, 10:47 PM

Quote:

Originally Posted by Curly1

Welcome to the forum, have fun shooting the hell out of it.

Thanks!

I ordered a spring kit to have on hand

spacecoast · 04-12-2017, 10:47 AM

Quote:

I figured they are cheap replacements.

Agreed, since they are so much smaller than the frame.

fury413rb · 04-12-2017, 09:55 PM

I apologize that I can't find it but is there a FAQ or reference for magazine identification? I would like to find more info on both of my mags

DonVoigt · 04-13-2017, 09:13 AM

Did you try the search feature?
There are many threads on mags, and nearly every thread with a luger has info on mags.

Sometimes you just have to dig and read a lot of posts to learn.

One of your mags is obviously a Haenel mag, and has the Haenel "H" or and "x" on the base, I can't quite decide from the picture.

Clear, close and well focused pictures of the mags would get you more info.

fury413rb · 04-18-2017, 09:15 PM

well everyone I finally had some evening time.

Took it apart and took some pics.

fury413rb · 04-18-2017, 09:15 PM

fury413rb · 04-18-2017, 09:16 PM

it looks like everything matches except for the grips and the mags. The mag release spring is broken so that explains the dropped mag release in the pic

Eugen · 04-18-2017, 09:31 PM

Wolff Springs has replacement springs for P.08s or you can probably get what you need from Lugerdoc; he has parts and does repair work.

Get that bad boy lubed and assembled and the go shoot it like you hate it!

fury413rb · 04-18-2017, 09:47 PM

Quote:

Originally Posted by Eugen

Wolff Springs has replacement springs for P.08s or you can probably get what you need from Lugerdoc; he has parts and does repair work.

Get that bad boy lubed and assembled and the go shoot it like you hate it!

thats the plan! Think I should replace the firing pin? It matches now so I thought perhaps?

the milled haneal mag doesnt fit will

alanint · 04-19-2017, 09:23 AM

Keeping everything matching would have no effect on value in this case. Another firing pin is a good idea as a maintenance issue, but breaking the original will not affect value.

fury413rb · 04-19-2017, 09:37 AM

Quote:

Originally Posted by Eugen

Wolff Springs has replacement springs for P.08s or you can probably get what you need from Lugerdoc; he has parts and does repair work.

Get that bad boy lubed and assembled and the go shoot it like you hate it!

Quote:

Originally Posted by alanint

Keeping everything matching would have no effect on value in this case. Another firing pin is a good idea as a maintenance issue, but breaking the original will not affect value.

agreed. I would be bummed though if I broke the originall 88 firing pin. I ordered a wolff spring kit, new mag release springs, and a spare firing pin.

I definitely want to change the grips.

rhuff · 04-19-2017, 03:23 PM

Sounds like you are on the road to learning about your Luger, and getting it range ready. Stick with normal velocity FMJ ammo when you get ready to take it to the range.

fury413rb · 05-04-2017, 11:38 PM

I replaced the mag release leaf spring, trigger bar leaf spring, trigger spring, and firing pin spring.

The action spring seems really strong so I havent replaced that or any of the other springs in the wolff kit.

When the trigger resets it is catching on something. I put the original firing pin back in it and its smoother during cocking the striker but the trigger is definitely catching on something.

I think its in the side plate? All the parts match.

04-11-2017, 07:38 AM	#1
fury413rb User Join Date: Apr 2017 Posts: 15 Thanks: 3 Thanked 11 Times in 5 Posts	New Guy with First Luger Hello! My residence is out of state so had it shipped back to Ohio. Its a 1940 dated code 42 mauser. It should be here by the end of the week and appears to be a bit rough, but all matching externally other than the mag. Will post pics ASAP and thanks for letting me join! I wanted a shooter so that was my goal. will have more once it gets here second mag second mag Last edited by fury413rb; 04-11-2017 at 09:28 AM.

04-11-2017, 03:45 PM	#7
Curly1 User Join Date: Oct 2005 Location: Upstate New York Posts: 1,228 Thanks: 111 Thanked 702 Times in 364 Posts	Welcome to the forum, have fun shooting the hell out of it. __________________ Laugh hard and often. Gary

04-13-2017, 09:13 AM	#11
DonVoigt User Join Date: Apr 2015 Location: near Charlotte NC Posts: 4,677 Thanks: 1,439 Thanked 4,347 Times in 2,038 Posts	Did you try the search feature? There are many threads on mags, and nearly every thread with a luger has info on mags. Sometimes you just have to dig and read a lot of posts to learn. One of your mags is obviously a Haenel mag, and has the Haenel "H" or and "x" on the base, I can't quite decide from the picture. Clear, close and well focused pictures of the mags would get you more info. __________________ 03man(Don Voigt); Luger student and collector. Looking for DWM side plate: 69 ; Dreyse 1907 pistol K.S. Gendarmerie

04-18-2017, 09:31 PM	#15
Eugen User Join Date: Apr 2016 Location: Newburgh,IN Posts: 757 Thanks: 366 Thanked 594 Times in 313 Posts	Wolff Springs has replacement springs for P.08s or you can probably get what you need from Lugerdoc; he has parts and does repair work. Get that bad boy lubed and assembled and the go shoot it like you hate it! __________________ “God created war so that Americans would learn geography.” ― Mark Twain

04-11-2017, 09:57 AM	#2
alanint User Join Date: Mar 2008 Location: Marco Island, Florida Posts: 4,867 Thanks: 1,685 Thanked 1,916 Times in 1,192 Posts	The grips have either been crudely re checkered or are replacements.

04-11-2017, 10:54 AM	#3
DavidJayUden Patron LugerForum Patron Join Date: Nov 2008 Posts: 4,047 Thanks: 578 Thanked 1,414 Times in 887 Posts	Looks like a good shooter Luger and project gun. Have fun and let the learning begin! dju

04-11-2017, 02:32 PM	#5
rhuff Patron LugerForum Patron Join Date: Mar 2011 Location: Az. Posts: 2,270 Thanks: 2,686 Thanked 958 Times in 704 Posts	A breakdown with a good inspection and cleaning will likely have it looking better....also a good lubing while down. It looks like it can be a good shooter for you. Let us know how things go at the range when time allows. Congrats on your first Luger.

04-12-2017, 09:55 PM	#10
fury413rb User Join Date: Apr 2017 Posts: 15 Thanks: 3 Thanked 11 Times in 5 Posts	I apologize that I can't find it but is there a FAQ or reference for magazine identification? I would like to find more info on both of my mags

04-18-2017, 09:15 PM	#12
fury413rb User Join Date: Apr 2017 Posts: 15 Thanks: 3 Thanked 11 Times in 5 Posts	well everyone I finally had some evening time. Took it apart and took some pics.

04-18-2017, 09:16 PM	#14
fury413rb User Join Date: Apr 2017 Posts: 15 Thanks: 3 Thanked 11 Times in 5 Posts	it looks like everything matches except for the grips and the mags. The mag release spring is broken so that explains the dropped mag release in the pic

04-19-2017, 09:23 AM	#17
alanint User Join Date: Mar 2008 Location: Marco Island, Florida Posts: 4,867 Thanks: 1,685 Thanked 1,916 Times in 1,192 Posts	Keeping everything matching would have no effect on value in this case. Another firing pin is a good idea as a maintenance issue, but breaking the original will not affect value.

04-19-2017, 03:23 PM	#19
rhuff Patron LugerForum Patron Join Date: Mar 2011 Location: Az. Posts: 2,270 Thanks: 2,686 Thanked 958 Times in 704 Posts	Sounds like you are on the road to learning about your Luger, and getting it range ready. Stick with normal velocity FMJ ammo when you get ready to take it to the range.

05-04-2017, 11:38 PM	#20
fury413rb User Join Date: Apr 2017 Posts: 15 Thanks: 3 Thanked 11 Times in 5 Posts	I replaced the mag release leaf spring, trigger bar leaf spring, trigger spring, and firing pin spring. The action spring seems really strong so I havent replaced that or any of the other springs in the wolff kit. When the trigger resets it is catching on something. I put the original firing pin back in it and its smoother during cocking the striker but the trigger is definitely catching on something. I think its in the side plate? All the parts match.