New Guy with First Luger - Page 2

tharpo · 05-05-2017, 12:28 AM

Your magazine 3531i is from 1936.

fury413rb · 05-05-2017, 09:07 AM

Quote:

Originally Posted by tharpo

Your magazine 3531i is from 1936.

thanks! It actually doesnt fit very well compared to the blued mag.

It has some gouges on the back that have been cleaned up but they may be enough to stand proud.

So I wiggled the trigger back and forth sideways and the notchy grabbing during trigger reset went away. I may not have had the new trigger spring full seated.

CAP Black · 05-05-2017, 10:54 AM

You may need a gunsmith; one with Luger experience.
Jack

Sergio Natali · 05-06-2017, 08:49 AM

My first LUGER was an used and abused 1942 Mauser Russian capture.
She tought me a lot, as I learned how to complete disassemble a LUGER, lube and reassemble it.
I used to take it to the range on Saturday afternoon.
Stupidly I sold it to a friend some years ago.

Enjoy your first LUGER.

mrerick · 05-06-2017, 09:41 AM

Check and lubricate the little disconnector plunger on the front of the sear bar. It has a small spring inside that keeps it pushed out after the trigger is released. Things may be sticky in there.

fury413rb · 05-10-2017, 10:52 AM

Quote:

Originally Posted by mrerick

Check and lubricate the little disconnector plunger on the front of the sear bar. It has a small spring inside that keeps it pushed out after the trigger is released. Things may be sticky in there.

that helped! I kind of want to replace that spring as I have replaced all the others.

DonVoigt · 05-10-2017, 08:11 PM

Quote:

Originally Posted by fury413rb

that helped! I kind of want to replace that spring as I have replaced all the others.

If it moves freely after lube, leave it alone. It is not a "strong" spring, but needs to move easily and "snap" if released quickly.

Finding one is next to impossible; if you must do something because it does not function correctly, at most carefully remove it and clean with penetrating oil, and clean it's recess. Re-assemble and your good.

05-06-2017, 08:49 AM	#24
Sergio Natali User Join Date: Feb 2013 Location: Somewhere in Northern Italy Posts: 2,646 Thanks: 1,082 Thanked 1,783 Times in 1,007 Posts	My first LUGER was an used and abused 1942 Mauser Russian capture. She tought me a lot, as I learned how to complete disassemble a LUGER, lube and reassemble it. I used to take it to the range on Saturday afternoon. Stupidly I sold it to a friend some years ago. Enjoy your first LUGER. __________________ "Originality can't be restored and should be at the top of any collector's priority list.

05-06-2017, 09:41 AM	#25
mrerick Super Moderator - Patron LugerForum Life Patron Join Date: Dec 2009 Location: Eastern North Carolina, USA Posts: 3,900 Thanks: 1,370 Thanked 3,094 Times in 1,503 Posts	Check and lubricate the little disconnector plunger on the front of the sear bar. It has a small spring inside that keeps it pushed out after the trigger is released. Things may be sticky in there. __________________ Igitur si vis pacem, para bellum - - Therefore if you want peace, prepare for war.

05-05-2017, 12:28 AM	#21
tharpo Lifer Lifetime Forum Patron Join Date: Jul 2006 Location: West Coast, USA Posts: 536 Thanks: 116 Thanked 375 Times in 153 Posts	Your magazine 3531i is from 1936.

05-05-2017, 10:54 AM	#23
CAP Black User Join Date: Dec 2008 Location: Fairmont, WV Right here in Mountaineer country and God's country Posts: 767 Thanks: 100 Thanked 168 Times in 96 Posts	You may need a gunsmith; one with Luger experience. Jack