FAQ Post

zeke1312 · 10-20-2005, 01:30 PM

Ed:

Excellent post full of valuable information. Is it possible (I'm asking something here that may be outside the "scope" of things) to post the info as a pdf file on the server?

Edward Tinker · 10-20-2005, 03:20 PM

it is possible for me to do so, or print it out. lets gather more and accurate info, and then I can send it or post it?

oh, by the way, was in Lincoln a couple of weeks ago, but buisness precluded me from doing any fun things! Like looking you or others up...

ed

Pete Ebbink · 10-20-2005, 03:35 PM

Chuck,

With any posting on the LF, you can click & drag your mouse to highlight text and photos...then you can copy the highlighted stuff (i.e. right click your mouse and select "copy"...) into MS Word and have it there to save and print out...

zeke1312 · 10-20-2005, 08:42 PM

Ed:

I'll try Pete's suggestion (thanks Pete!). Also Ed, Please call me when you are in Lincoln again! We will be leaving for Arizona in January for a few weeks, otherwise should be around.

I would like to talk to someone like yourself in person about Lugers in general as I am a "newbie" in the hunt. A picture is worth a thousand words so to speak!

wlyon · 10-20-2005, 09:49 PM

Ed

Very good information. You definitely need to write a book. Sign me up for a copy.

jamese · 10-21-2005, 06:14 AM

Ed,
good info, when did you find time to compile all that info

Jim

unspellable · 10-21-2005, 10:12 AM

I would add two production lines.

Mauser bought the Swiss line intending to use it for the re-intro Luger of the seventies. Much of the equipment was in poor condition, and most of it was discarded. The majority of the equipment and tooling on this line was new and I would count it as a seperate fourth production line. There are a number of detail differences in the re-intros so that here is no problem in determining they came from this line even without considering the markings.

Aimco here in the US has been producing stainless Lugers and their production facility must be counted as a fifth line.

Edward Tinker · 10-21-2005, 11:23 AM

Quote:

Originally posted by jamese
Ed,
good info, when did you find time to compile all that info

Jim

two years ago! got some feedback that it needed to be reworked, so then I just "laid" it aside.... then thought, if I post it, folks will tell me those areeas that are wrong, give me suggestions on adding and improving it, etc....

This has info from books and from many members... There are lots of things that can be added, comments about holsters from Jerry, comments about Mausers from Frank Manders, etc.

Ed

Edward Tinker · 10-21-2005, 07:23 PM

I need an articulate and accurate telling of this for the Faq:

- Maybe this can lead to the distinction between a "Proof Mark", a "WaA and/or a worker's Acceptance Mark", and a grip strap/Unit mark.

wworker · 10-25-2005, 01:08 PM

Ed, thanks for all of the effort on the FAQ's.

I have them printed out so I can read offline. Excellent reading.

One question, will you be adding more FAQs?

Edward Tinker · 10-25-2005, 01:39 PM

yes, already added some suggestions from Bob on sear safeties and mag safeties.

So, if folks think a subject should be added to, tell me and I'll be glad to ask for intelligent answers and add it to the FAQ.

Ed

10-20-2005, 01:30 PM	#1
zeke1312 User Join Date: Jul 2005 Posts: 167 Thanks: 0 Thanked 1 Time in 1 Post	FAQ Post Ed: Excellent post full of valuable information. Is it possible (I'm asking something here that may be outside the "scope" of things) to post the info as a pdf file on the server?

10-20-2005, 03:20 PM	#2
Edward Tinker Super Moderator Eternal Lifer LugerForum Patron Join Date: Jun 2002 Location: North of Spokane, WA Posts: 15,931 Thanks: 2,032 Thanked 4,527 Times in 2,090 Posts	it is possible for me to do so, or print it out. lets gather more and accurate info, and then I can send it or post it? oh, by the way, was in Lincoln a couple of weeks ago, but buisness precluded me from doing any fun things! Like looking you or others up... ed __________________ Edward Tinker ************ Co-Author of Police Lugers - Co-Author of Simson Lugers Author of Veteran Bring Backs Vol I, Vol II, Vol III and Vol IV

10-20-2005, 09:49 PM	#5
wlyon Lifer 2X Lifetime Forum Patron Join Date: May 2005 Location: Somewhere in Montana Posts: 2,635 Thanks: 3,174 Thanked 2,555 Times in 954 Posts	Ed Very good information. You definitely need to write a book. Sign me up for a copy. __________________ Bill Lyon

10-21-2005, 06:14 AM	#6
jamese User Join Date: Jan 2003 Location: South Florida Posts: 789 Thanks: 0 Thanked 84 Times in 34 Posts	Ed, good info, when did you find time to compile all that info Jim __________________ The "truth" is a matter of Perception

10-21-2005, 10:12 AM	#7
unspellable User Join Date: Jun 2002 Location: Iowa Posts: 768 Thanks: 0 Thanked 19 Times in 11 Posts	Luger production lines I would add two production lines. Mauser bought the Swiss line intending to use it for the re-intro Luger of the seventies. Much of the equipment was in poor condition, and most of it was discarded. The majority of the equipment and tooling on this line was new and I would count it as a seperate fourth production line. There are a number of detail differences in the re-intros so that here is no problem in determining they came from this line even without considering the markings. Aimco here in the US has been producing stainless Lugers and their production facility must be counted as a fifth line.

10-20-2005, 03:35 PM	#3
Pete Ebbink User Join Date: Jun 2002 Location: The USA Posts: 5,919 Thanks: 0 Thanked 6 Times in 4 Posts	Chuck, With any posting on the LF, you can click & drag your mouse to highlight text and photos...then you can copy the highlighted stuff (i.e. right click your mouse and select "copy"...) into MS Word and have it there to save and print out...

10-20-2005, 08:42 PM	#4
zeke1312 User Join Date: Jul 2005 Posts: 167 Thanks: 0 Thanked 1 Time in 1 Post	Ed: I'll try Pete's suggestion (thanks Pete!). Also Ed, Please call me when you are in Lincoln again! We will be leaving for Arizona in January for a few weeks, otherwise should be around. I would like to talk to someone like yourself in person about Lugers in general as I am a "newbie" in the hunt. A picture is worth a thousand words so to speak!

10-21-2005, 07:23 PM	#9
Edward Tinker Super Moderator Eternal Lifer LugerForum Patron Join Date: Jun 2002 Location: North of Spokane, WA Posts: 15,931 Thanks: 2,032 Thanked 4,527 Times in 2,090 Posts	I need an articulate and accurate telling of this for the Faq: - Maybe this can lead to the distinction between a "Proof Mark", a "WaA and/or a worker's Acceptance Mark", and a grip strap/Unit mark. __________________ Edward Tinker ************ Co-Author of Police Lugers - Co-Author of Simson Lugers Author of Veteran Bring Backs Vol I, Vol II, Vol III and Vol IV

10-25-2005, 01:08 PM	#10
wworker User Join Date: Aug 2005 Location: Virginia Posts: 65 Thanks: 0 Thanked 0 Times in 0 Posts	Ed, thanks for all of the effort on the FAQ's. I have them printed out so I can read offline. Excellent reading. One question, will you be adding more FAQs?

10-25-2005, 01:39 PM	#11
Edward Tinker Super Moderator Eternal Lifer LugerForum Patron Join Date: Jun 2002 Location: North of Spokane, WA Posts: 15,931 Thanks: 2,032 Thanked 4,527 Times in 2,090 Posts	yes, already added some suggestions from Bob on sear safeties and mag safeties. So, if folks think a subject should be added to, tell me and I'll be glad to ask for intelligent answers and add it to the FAQ. Ed __________________ Edward Tinker ************ Co-Author of Police Lugers - Co-Author of Simson Lugers Author of Veteran Bring Backs Vol I, Vol II, Vol III and Vol IV