my profile |
register |
faq |
search upload photo | donate | calendar |
04-02-2023, 05:55 PM | #61 | |
Patron
LugerForum Patron Join Date: Mar 2011
Location: Az.
Posts: 2,288
Thanks: 2,703
Thanked 971 Times in 716 Posts
|
Quote:
__________________
Need DWM breechblock #21 |
|
04-06-2023, 09:25 AM | #62 |
New User
Join Date: Apr 2023
Posts: 1
Thanks: 0
Thanked 0 Times in 0 Posts
|
The weapon's components will obviously need to be replaced or repaired.
|
04-30-2023, 01:21 AM | #63 |
User
Join Date: Aug 2022
Posts: 28
Thanks: 0
Thanked 16 Times in 8 Posts
|
Sorry it has taken so long to get back here. I don't get to the range as often as I'd like. It does seem I'm on the right track. After firing last time and having the problem, I used a .30 bore brush with a little solvent in the chamber. With the amount of rust and dirt I've gotten out of this thing so far, it seemed a fair bet that there was some varnishing in the chamber. That could cause the problem. I got a chance to do some shooting today, and the jams are much less frequent. I gave it another good cleaning today. Hopefully that will bring an end to that problem and let me address the last two. Without knowing if this was going to work I've been buying parts one at a time, so to speak. The only remaining parts to be replaced are the hold open lever and the spring for it. The other problem is still that loose safety. I've got to find a way to get the pin out so I can remove, inspect, and/or replace the safety.
|
Thread Tools | |
Display Modes | |
|
|