LugerForum Discussion Forums my profile | register | faq | search
upload photo | donate | calendar

Go Back   LugerForum Discussion Forums > General Discussion Forums > Repairs, Restoration & Refinishing

Reply
Thread Tools Display Modes
Unread 04-19-2023, 11:26 AM   #1
G.T.
Lifer
Lifetime Forum
Patron
 
Join Date: Jun 2002
Location: Chandler Arizona
Posts: 3,502
Thanks: 1,318
Thanked 3,639 Times in 1,001 Posts
Default Back to crazy AZ!

Hi to all! Well, had another dose of all day crazy repair effort yesterday! I am currently finishing up some repair jobs that also involved blue and straw! Turned out pretty good for shooters, just not all polished out and rounded over! Well, somewhere along the way, I decided that the trigger spring will be a, "must do" replacement item, seeing only positive trigger return, and frankly, no down side?
Soooo, I get it all together and dry fire it at the bench and it won't go off!!!! I squeeze it as hard as I can and no dice, after several disassemblies and parts swapping, I can just barely get it to work with about fifty pound trigger pull!!! keep in mind that the gun worked fine prior to the re-blue. So here is where the crazy starts sneaking in... You find yourself doing the same thing over and over and expect different results... And, unfortunatly, I know this! So, before I get to, "Dog sh$$t nuts!" I stopped and reviewed. and fortunatly, I start right at the heart of the issue, the trigger spring no-brainer replacement. Turns out the spring, (aftermarket) Is made with extremely heavy spring wire, and as such, the coils were stacking and not allowing the trigger to go back far enough to trip the sear. Duh! Now I am creating my own problems... So, in retrospect, the trigger should go back all the way to the frame, spring or no spring, every time in order to make the fire control parts have the correct takeup and overtravel.. I put an original spring in it, and right back to normal... Happy, happy, joy, joy! Hope this enlightens some of you, (like me) shade tree Luger techs! Best to all, til.....lat'r......GT
BTW, remember! We're all crazy, some of us just get caught!! Best, GT
G.T. is offline   Reply With Quote
Unread 04-19-2023, 02:10 PM   #2
Mac Cat
Lifer
Lifetime Forum
Patron
 
Mac Cat's Avatar
 
Join Date: Apr 2015
Location: Austin, Texas
Posts: 709
Thanks: 2,073
Thanked 590 Times in 316 Posts
Default

Any idea where that replacement spring came from?
Who carries reliable replacement part ?

I've bought a few small parts from SARCO that worked for me, but no springs.
Mac Cat is offline   Reply With Quote
The following 2 members says Thank You to Mac Cat for your post:
Unread 04-19-2023, 02:51 PM   #3
G.T.
Lifer
Lifetime Forum
Patron
 
Join Date: Jun 2002
Location: Chandler Arizona
Posts: 3,502
Thanks: 1,318
Thanked 3,639 Times in 1,001 Posts
Default No idea?

Hi Russ, I don't know as I've never bought specifically Luger trigger springs? I get them in parts groupings that usually have a couple tossed in, or as tag alongs on quantity trigger purchases. I wasn't aware that the heavy ones could be problematic? I'll be a lot more careful on trigger springs going forward... best, til....lat'r....GT...
G.T. is offline   Reply With Quote
The following member says Thank You to G.T. for your post:
Unread 04-20-2023, 03:37 PM   #4
Edward Tinker
Super Moderator
Eternal Lifer
LugerForum
Patron
 
Edward Tinker's Avatar
 
Join Date: Jun 2002
Location: North of Spokane, WA
Posts: 15,926
Thanks: 2,014
Thanked 4,523 Times in 2,089 Posts
Default

I'd love a packet of springs of all of them in a luger and also all the small pins and then buy about 20 packs of them
Edward Tinker is offline   Reply With Quote
The following member says Thank You to Edward Tinker for your post:
Unread 04-20-2023, 09:00 PM   #5
lugerholsterrepair
Moderator
Lifetime Forum
Patron
 
lugerholsterrepair's Avatar
 
Join Date: Jun 2002
Location: Arizona/Colorado
Posts: 7,768
Thanks: 4,896
Thanked 3,122 Times in 1,433 Posts
Default

I had a Luger once with a light but smooth trigger pull..turns out someone replaced the original they likely lost in the carpet with a ball point pen spring. It worked...
__________________
Jerry Burney
11491 S. Guadalupe Drive

Yuma AZ 85367-6182


lugerholsterrepair@earthlink.net

928 342-7583 (CO & AZ) Year Round
719 207-3331 (cell)


"For those who Fight For It, Life has a flavor the protected will never know."
lugerholsterrepair is offline   Reply With Quote
The following 4 members says Thank You to lugerholsterrepair for your post:
Unread 04-28-2023, 03:14 AM   #6
PolishX
User
 
Join Date: Jan 2022
Location: Wasilla Alaska
Posts: 18
Thanks: 19
Thanked 11 Times in 6 Posts
Default

any idea if Wolff spring packs will do the trick ?
https://www.gunsprings.com/LUGER/cID1/mID38/dID162

Last edited by PolishX; 04-28-2023 at 03:17 AM. Reason: information
PolishX is offline   Reply With Quote
Unread 04-28-2023, 10:59 AM   #7
G.T.
Lifer
Lifetime Forum
Patron
 
Join Date: Jun 2002
Location: Chandler Arizona
Posts: 3,502
Thanks: 1,318
Thanked 3,639 Times in 1,001 Posts
Default wolfe springs

Hi Rick, I think on the average, wolfe springs are pretty good replacement springs? But, I'm not familier with their trigger spring?
The three most important springs in a Luger are the mainspring, the extractor spring, and the magazine spring. The rest don't seem to have any extreme demands put on them? The sear bar spring might have something to do with doubling when weak, but for the most part, if it's in there, it's probably working! ... Best, til...lat'r....GT..
G.T. is offline   Reply With Quote
The following 2 members says Thank You to G.T. for your post:
Unread 04-28-2023, 08:02 PM   #8
Edward Tinker
Super Moderator
Eternal Lifer
LugerForum
Patron
 
Edward Tinker's Avatar
 
Join Date: Jun 2002
Location: North of Spokane, WA
Posts: 15,926
Thanks: 2,014
Thanked 4,523 Times in 2,089 Posts
Default

I've bought the wolff spring kits a couple of times, usually forget to use all of them
I had just bought a spring and pin replacement kit for the 1911 is why I stated above it'd be nice to get all the small parts.
Edward Tinker is offline   Reply With Quote
The following member says Thank You to Edward Tinker for your post:
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 01:35 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright © 1998 - 2024, Lugerforum.com