Dwm

derekapex · 06-06-2010, 02:44 PM

My friend and I have received a DWM Luger with serial number 6006. There are no letters after or under the serial number and I cannot find a date on the pistol

06 is also stamped everywhere on the pistol.

on the front strap is what I think is a unit mark, R.M.G.A.11.44. The R is in cursive for lack of better term.

It also has GESICHERT stamped on the left side when selector is in down position.

came with leather holster, what appears to be a fairly standard 4" barrel.

Any help with be great.

mrerick · 06-06-2010, 03:54 PM

Congratulations, and welcome to the Forum and the Luger addiction!!!!

Pictures will be quite helpful if you can post some...

Marc

DavidJayUden · 06-06-2010, 03:55 PM

Any chance for pictures?
dju

George Anderson · 06-06-2010, 04:15 PM

derekapex, are the series of proofs on the left or right side of the receiver? Does the P08 have a stock lug? Where on the side plate and takedown lever are the serial numbers 06 stamped?

derekapex · 06-06-2010, 04:52 PM

i will get back with some pictures later. cant do it right now, but thanks for you help everyone

JTD · 06-06-2010, 05:08 PM

best guess is 1908 first issue Reserve maschinengewehr-abteilung 11 waffe 44 Pics would help. John

derekapex · 06-07-2010, 10:37 PM

Does anyone know is it ok to clean the barrell. the barrell looks pretty clean, but has a very little white build up. also, im trying to upload pictures, but when i click on the insert image, its telling me to enter the URL. hopefully i can get this thing figured out.

derekapex · 06-07-2010, 10:43 PM

OK. i figured it out. i guess i am supposed to create an album so I did under derekapex. Hopefully these pictures work. Thanks.

Norme · 06-07-2010, 10:59 PM

Hi Ernie, You have a very collectible, unit marked, 1st Issue Luger manufactured in 1909. It was issued to a reserve regiment machine gun company. Unfortunately your pictures are too small for us to assess condition. We need larger, clearer, pictures, of both the gun and holster. Regards, Norm

derekapex · 06-07-2010, 11:19 PM

ok. i will try to get clearer pictures in the next few days or so. any close-up pictures you need of certain parts of the gun? thanks very much for the info.

derekapex · 06-07-2010, 11:24 PM

also, is there any recommendations on a place i can send it to get it appraised and maybe cleaned if it needs it.

Edward Tinker · 06-08-2010, 03:20 AM

It depends on what you are wanting to do; Simpson's offers a appraisel service, Tom Whiteman can too (my partner) www.legacy-collectables.com ; and we could clean it for you, although that is easy enough to do by yourself. When cleaning a gun, do less rather than more, use oil, take it apart minimally and wipe it down; don't get oil on the grips if you can help it, but if you take them off, be very careful.

If looking to sell it, both of the above offer that service too on a commission basis.

For picture uploading, you can do the album bit, but far easier for you and others to do the Manage Attachments button just a bit further down the page, and you can upload 10 at a time.

Ed

derekapex · 06-10-2010, 10:24 PM

I have new and better pictures I took, but it is not letting me download them. any suggestions?

MFC · 06-10-2010, 11:42 PM

Ernie,
try this... http://forum.lugerforum.com/showthread.php?t=23172
If that doesn't work your photos are too large.

whcoyote · 10-11-2010, 01:16 PM

Derek:
If you can provide pictures of acceptable quality, the members of this forumcan provide you with a reasonable estimate of the pistol's value.
As for cleaning the barrel - yes - you may do that. It will not hurt. Wipe the entire pistol down - inside and out - with a good grade of gun oil and protect it from rust.
Bob

06-06-2010, 02:44 PM	#1
derekapex User Join Date: Jun 2010 Posts: 7 Thanks: 0 Thanked 0 Times in 0 Posts	Dwm My friend and I have received a DWM Luger with serial number 6006. There are no letters after or under the serial number and I cannot find a date on the pistol 06 is also stamped everywhere on the pistol. on the front strap is what I think is a unit mark, R.M.G.A.11.44. The R is in cursive for lack of better term. It also has GESICHERT stamped on the left side when selector is in down position. came with leather holster, what appears to be a fairly standard 4" barrel. Any help with be great. Last edited by derekapex; 06-06-2010 at 03:50 PM. Reason: More info

06-08-2010, 03:20 AM	#12
Edward Tinker Super Moderator Eternal Lifer LugerForum Patron Join Date: Jun 2002 Location: North of Spokane, WA Posts: 15,909 Thanks: 1,986 Thanked 4,500 Times in 2,076 Posts	It depends on what you are wanting to do; Simpson's offers a appraisel service, Tom Whiteman can too (my partner) www.legacy-collectables.com ; and we could clean it for you, although that is easy enough to do by yourself. When cleaning a gun, do less rather than more, use oil, take it apart minimally and wipe it down; don't get oil on the grips if you can help it, but if you take them off, be very careful. If looking to sell it, both of the above offer that service too on a commission basis. For picture uploading, you can do the album bit, but far easier for you and others to do the Manage Attachments button just a bit further down the page, and you can upload 10 at a time. Ed __________________ Edward Tinker ************ Co-Author of Police Lugers - Co-Author of Simson Lugers Author of Veteran Bring Backs Vol I, Vol II, Vol III and Vol IV

06-10-2010, 11:42 PM	#14
MFC User Join Date: Sep 2006 Location: Louisiana Posts: 1,237 Thanks: 183 Thanked 281 Times in 162 Posts	Ernie, try this... http://forum.lugerforum.com/showthread.php?t=23172 If that doesn't work your photos are too large. __________________ Mike C.

06-06-2010, 03:54 PM	#2
mrerick Super Moderator - Patron LugerForum Life Patron Join Date: Dec 2009 Location: Eastern North Carolina, USA Posts: 3,900 Thanks: 1,370 Thanked 3,094 Times in 1,503 Posts	Congratulations, and welcome to the Forum and the Luger addiction!!!! Pictures will be quite helpful if you can post some... Marc

06-06-2010, 03:55 PM	#3
DavidJayUden Patron LugerForum Patron Join Date: Nov 2008 Posts: 4,047 Thanks: 578 Thanked 1,414 Times in 887 Posts	Any chance for pictures? dju

06-06-2010, 04:15 PM	#4
George Anderson Lifer Lifetime Forum Patron Join Date: Jul 2002 Location: VA Posts: 3,592 Thanks: 1,769 Thanked 2,527 Times in 786 Posts	derekapex, are the series of proofs on the left or right side of the receiver? Does the P08 have a stock lug? Where on the side plate and takedown lever are the serial numbers 06 stamped?

06-06-2010, 04:52 PM	#5
derekapex User Join Date: Jun 2010 Posts: 7 Thanks: 0 Thanked 0 Times in 0 Posts	i will get back with some pictures later. cant do it right now, but thanks for you help everyone

06-06-2010, 05:08 PM	#6
JTD User Join Date: Feb 2005 Location: PA Posts: 424 Thanks: 214 Thanked 407 Times in 148 Posts	best guess is 1908 first issue Reserve maschinengewehr-abteilung 11 waffe 44 Pics would help. John

06-07-2010, 10:37 PM	#7
derekapex User Join Date: Jun 2010 Posts: 7 Thanks: 0 Thanked 0 Times in 0 Posts	Does anyone know is it ok to clean the barrell. the barrell looks pretty clean, but has a very little white build up. also, im trying to upload pictures, but when i click on the insert image, its telling me to enter the URL. hopefully i can get this thing figured out.

06-07-2010, 10:43 PM	#8
derekapex User Join Date: Jun 2010 Posts: 7 Thanks: 0 Thanked 0 Times in 0 Posts	OK. i figured it out. i guess i am supposed to create an album so I did under derekapex. Hopefully these pictures work. Thanks.

06-07-2010, 10:59 PM	#9
Norme Always A Lifetime Forum Patron Join Date: Jul 2009 Location: Colorado Posts: 2,414 Thanks: 224 Thanked 2,591 Times in 930 Posts	Hi Ernie, You have a very collectible, unit marked, 1st Issue Luger manufactured in 1909. It was issued to a reserve regiment machine gun company. Unfortunately your pictures are too small for us to assess condition. We need larger, clearer, pictures, of both the gun and holster. Regards, Norm

06-07-2010, 11:19 PM	#10
derekapex User Join Date: Jun 2010 Posts: 7 Thanks: 0 Thanked 0 Times in 0 Posts	ok. i will try to get clearer pictures in the next few days or so. any close-up pictures you need of certain parts of the gun? thanks very much for the info.

06-07-2010, 11:24 PM	#11
derekapex User Join Date: Jun 2010 Posts: 7 Thanks: 0 Thanked 0 Times in 0 Posts	also, is there any recommendations on a place i can send it to get it appraised and maybe cleaned if it needs it.

06-10-2010, 10:24 PM	#13
derekapex User Join Date: Jun 2010 Posts: 7 Thanks: 0 Thanked 0 Times in 0 Posts	I have new and better pictures I took, but it is not letting me download them. any suggestions?

10-11-2010, 01:16 PM	#15
whcoyote User Join Date: May 2008 Location: SW Virginia Posts: 75 Thanks: 0 Thanked 7 Times in 6 Posts	Derek: If you can provide pictures of acceptable quality, the members of this forumcan provide you with a reasonable estimate of the pistol's value. As for cleaning the barrel - yes - you may do that. It will not hurt. Wipe the entire pistol down - inside and out - with a good grade of gun oil and protect it from rust. Bob